Suvarna Garge (Editor)

Molybdenum

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Name, symbol
  
molybdenum, Mo

Group, block
  
group 6, d-block

Element category
  
transition metal

Electron configuration
  
[Kr] 4d55s1

Atomic number
  
42

CAS ID
  
7439-98-7

Appearance
  
gray metallic

Period
  
period 5

Symbol
  
Mo

Atomic mass
  
95.94 u ± 0.02 u

Melting point
  
2,623 °C

Discoverer
  
Molybdenum Dale Engineering Molybdenum Benefits

Pronunciation
  
/ˌmɒlɪbˈdiːnəm/ or /məˈlɪbdᵻnəm/MOL-ib-DEE-nəm or mə-LIB-di-nəm

Molybdenum periodic table of videos


Molybdenum is a chemical element with symbol Mo and atomic number 42. The name is from Neo-Latin molybdaenum, from Ancient Greek Μόλυβδος molybdos, meaning lead, since its ores were confused with lead ores. Molybdenum minerals have been known throughout history, but the element was discovered (in the sense of differentiating it as a new entity from the mineral salts of other metals) in 1778 by Carl Wilhelm Scheele. The metal was first isolated in 1781 by Peter Jacob Hjelm.

Contents

Molybdenum does not occur naturally as a free metal on Earth; it is found only in various oxidation states in minerals. The free element, a silvery metal with a gray cast, has the sixth-highest melting point of any element. It readily forms hard, stable carbides in alloys, and for this reason most of world production of the element (about 80%) is used in steel alloys, including high-strength alloys and superalloys.

Most molybdenum compounds have low solubility in water, but when molybdenum-bearing minerals contact oxygen and water, the resulting molybdate ion MoO2−
4
is quite soluble. Industrially, molybdenum compounds (about 14% of world production of the element) are used in high-pressure and high-temperature applications as pigments and catalysts.

Molybdenum Facts About Molybdenum

Molybdenum-bearing enzymes are by far the most common bacterial catalysts for breaking the chemical bond in atmospheric molecular nitrogen in the process of biological nitrogen fixation. At least 50 molybdenum enzymes are now known in bacteria and animals, although only bacterial and cyanobacterial enzymes are involved in nitrogen fixation. These nitrogenases contain molybdenum in a form different from other molybdenum enzymes, which all contain fully oxidized molybdenum in a molybdenum cofactor. These various molybdenum cofactor enzymes are vital to the organisms, and molybdenum is an essential element for life in all higher eukaryote organisms, though not in all bacteria.

Molybdenum Pictures stories and facts about the element Molybdenum in the

Physical properties

Molybdenum httpsuploadwikimediaorgwikipediacommons33

In its pure form, molybdenum is a silvery-grey metal with a Mohs hardness of 5.5. It has a melting point of 2,623 °C (4,753 °F); of the naturally occurring elements, only tantalum, osmium, rhenium, tungsten, and carbon have higher melting points. Weak oxidation of molybdenum starts at 300 °C (572 °F). It has one of the lowest coefficients of thermal expansion among commercially used metals. The tensile strength of molybdenum wires increases about 3 times, from about 10 to 30 GPa, when their diameter decreases from ~50–100 nm to 10 nm.

Isotopes

Molybdenum Molybdenum Chemical Element reaction uses elements metal

There are 35 known isotopes of molybdenum, ranging in atomic mass from 83 to 117, as well as four metastable nuclear isomers. Seven isotopes occur naturally, with atomic masses of 92, 94, 95, 96, 97, 98, and 100. Of these naturally occurring isotopes, only molybdenum-100 is unstable.

Molybdenum Pictures stories and facts about the element Molybdenum in the

Molybdenum-98 is the most abundant isotope, comprising 24.14% of all molybdenum. Molybdenum-100 has a half-life of about 1019 y and undergoes double beta decay into ruthenium-100. Molybdenum isotopes with mass numbers from 111 to 117 all have half-lives of approximately 150 ns. All unstable isotopes of molybdenum decay into isotopes of niobium, technetium, and ruthenium.

Molybdenum Molybdenum

As also noted below, the most common isotopic molybdenum application involves molybdenum-99, which is a fission product. It is a parent radioisotope to the short-lived gamma-emitting daughter radioisotope technetium-99m, a nuclear isomer used in various imaging applications in medicine. In 2008, the Delft University of Technology applied for a patent on the molybdenum-98-based production of molybdenum-99.

Compounds and chemistry

Molybdenum is a transition metal with an electronegativity of 2.16 on the Pauling scale and a standard atomic weight of 95.95 g/mol. It does not visibly react with oxygen or water at room temperature, and the bulk oxidation occurs at temperatures above 600 °C, resulting in molybdenum trioxide:

2 Mo + 3 O
2
→ 2 MoO
3

The trioxide is volatile and sublimes at high temperatures. This prevents formation of a continuous protective (passivating) oxide layer, which would stop the bulk oxidation of metal. Molybdenum has several oxidation states, the most stable being +4 and +6 (bolded in the table at left). The chemistry and the compounds show more similarity to tungsten than to chromium; the instability of molybdenum(III) and tungsten(III) compounds, for example, contrasts with the stability of the chromium(III) compounds. The highest oxidation state is seen in molybdenum(VI) oxide (MoO3), while the normal sulfur compound is molybdenum disulfide MoS2.

Molybdenum(VI) oxide is soluble in strong alkaline water, forming molybdates (MoO42−). Molybdates are weaker oxidants than chromates, but they show a similar tendency to form complex oxyanions by condensation at lower pH values, such as [Mo7O24]6− and [Mo8O26]4−. Polymolybdates can incorporate other ions, forming polyoxometalates. The dark-blue phosphorus-containing heteropolymolybdate P[Mo12O40]3− is used for the spectroscopic detection of phosphorus. The broad range of oxidation states of molybdenum is reflected in various molybdenum chlorides:

  • Molybdenum(II) chloride MoCl2 (yellow solid)
  • Molybdenum(III) chloride MoCl3 (dark red solid)
  • Molybdenum(IV) chloride MoCl4 (black solid)
  • Molybdenum(V) chloride MoCl5 (dark green solid)
  • Molybdenum(VI) chloride MoCl6 (brown solid)
  • The structure of the MoCl2 is clusters of Mo6Cl84+ and four chloride ions compensating the charge.

    Like chromium and some other transition metals, molybdenum forms quadruple bonds, such as in Mo2(CH3COO)4. This compound can be transformed into Mo2Cl84−, which also has a quadruple bond.

    The oxidation state 0 is possible with carbon monoxide as ligand, such as in molybdenum hexacarbonyl, Mo(CO)6.

    History

    Molybdenite—the principal ore from which molybdenum is now extracted—was previously known as molybdena. Molybdena was confused with and often utilized as though it were graphite. Like graphite, molybdenite can be used to blacken a surface or as a solid lubricant. Even when molybdena was distinguishable from graphite, it was still confused with the common lead ore PbS (now called galena); the name comes from Ancient Greek Μόλυβδος molybdos, meaning lead. (The Greek word itself has been proposed as a loanword from Anatolian Luvian and Lydian languages).

    Although (reportedly) molybdenum was deliberately alloyed with steel in one 14th-century Japanese sword (mfd. ca. 1330), that art was never employed widely and was later lost. In the West in 1754, Bengt Andersson Qvist examined a sample of molybdenite and determined that it did not contain lead and thus was not galena.

    By 1778 Swedish chemist Carl Wilhelm Scheele stated firmly that molybdena was (indeed) neither galena nor graphite. Instead, Scheele correctly proposed that molybdena was an ore of a distinct new element, named molybdenum for the mineral in which it resided, and from which it might be isolated. Peter Jacob Hjelm successfully isolated molybdenum using carbon and linseed oil in 1781.

    For the next century, molybdenum had no industrial use. It was relatively scarce, the pure metal was difficult to extract, and the necessary techniques of metallurgy were immature. Early molybdenum steel alloys showed great promise of increased hardness, but efforts to manufacture the alloys on a large scale were hampered with inconsistent results, a tendency toward brittleness, and recrystallization. In 1906, William D. Coolidge filed a patent for rendering molybdenum ductile, leading to applications as a heating element for high-temperature furnaces and as a support for tungsten-filament light bulbs; oxide formation and degradation require that molybdenum be physically sealed or held in an inert gas. In 1913, Frank E. Elmore developed a froth flotation process to recover molybdenite from ores; flotation remains the primary isolation process.

    During World War I, demand for molybdenum spiked; it was used both in armor plating and as a substitute for tungsten in high speed steels. Some British tanks were protected by 75 mm (3 in) manganese steel plating, but this proved to be ineffective. The manganese steel plates were replaced with much lighter 25 mm (1.0 in) molybdenum steel plates allowing for higher speed, greater maneuverability, and better protection. The Germans also used molybdenum-doped steel for heavy artillery, like in the super-heavy howitzer Big Bertha, because traditional steel melts at the temperatures produced by the propellant of the one ton shell. After the war, demand plummeted until metallurgical advances allowed extensive development of peacetime applications. In World War II, molybdenum again saw strategic importance as a substitute for tungsten in steel alloys.

    Occurrence and production

    Molybdenum is the 54th most abundant element in the Earth's crust and the 25th most abundant element in its oceans, with an average of 10 parts per billion; it is the 42nd most abundant element in the Universe. The Russian Luna 24 mission discovered a molybdenum-bearing grain (1 × 0.6 µm) in a pyroxene fragment taken from Mare Crisium on the Moon. The comparative rarity of molybdenum in the Earth's crust is offset by its concentration in a number of water-insoluble ores, often combined with sulfur in the same way as copper, with which it is often found. Though molybdenum is found in such minerals as wulfenite (PbMoO4) and powellite (CaMoO4), the main commercial source is molybdenite (MoS2). Molybdenum is mined as a principal ore and is also recovered as a byproduct of copper and tungsten mining.

    The world's production of molybdenum was 250,000 tonnes in 2011, the largest producers being China (94,000 t), United States (64,000 t), Chile (38,000 t), Peru (18,000 t) and Mexico (12,000 t). The total reserves are estimated at 10 million tonnes, and are mostly concentrated in China (4.3 Mt), US (2.7 Mt) and Chile (1.2 Mt). By continent, 93% of world molybdenum production is about evenly shared between North America, South America (mainly in Chile), and China. Europe and the rest of Asia (mostly Armenia, Russia, Iran and Mongolia) produce the remainder.

    In molybdenite processing, the ore is first roasted in air at a temperature of 700 °C (1,292 °F). The process gives gaseous sulfur dioxide and the molybdenum(VI) oxide:

    2 MoS2 + 7 O2 → 2 MoO3 + 4 SO2

    The oxidized ore is then usually extracted with aqueous ammonia to give ammonium molybdate:

    MoO3 + 2 NH3 + H2O → (NH4)2(MoO4) + H2O

    Copper, an impurity in molybdenite, is less soluble in ammonia. To completely remove it from the solution, it is precipitated with hydrogen sulfide. Ammonium molybdate converts to ammonium dimolybdate, which is isolated as a solid. Heating this solid gives molybdenum trioxide:

    (NH4)2Mo2O7 → 2 MoO3 + 2 NH3 + H2O

    The crude trioxide can be further purified by sublimation at 1,100 °C (2,010 °F).

    Metallic molybdenum is produced by reduction of the oxide with hydrogen:

    MoO3 + 3 H2 → Mo + 3 H2O

    The molybdenum for steel production is reduced by the aluminothermic reaction with addition of iron to produce ferromolybdenum. A common form of ferromolybdenum contains 60% molybdenum.

    Molybdenum has a value of approximately $30,000 per tonne as of August 2009. It maintained a price at or near $10,000 per tonne from 1997 through 2003, and reached a peak of $103,000 per tonne in June 2005. In 2008 the London Metal Exchange announced that molybdenum would be traded as a commodity on the exchange.

    History of molybdenum mining

    Historically, the Knaben mine in southern Norway, opened in 1885, was the first dedicated molybdenum mine. It was closed from 1973 to 2007, but was reopened that year. and now produces 100,000 kilograms (98 long tons; 110 short tons) of molybdenum disulfide per year. Large mines in Colorado (such as the Henderson mine and the Climax mine) and in British Columbia yield molybdenite as their primary product, while many porphyry copper deposits such as the Bingham Canyon Mine in Utah and the Chuquicamata mine in northern Chile produce molybdenum as a byproduct of copper mining.

    Alloys

    About 86% of molybdenum produced is used in metallurgy, with the rest used in chemical applications. The estimated global use is structural steel 35%, stainless steel 25%, chemicals 14%, tool & high-speed steels 9%, cast iron 6%, molybdenum elemental metal 6%, and superalloys 5%.

    Molybdenum can withstand extreme temperatures without significantly expanding or softening, making it useful in environments of intense heat, including military armor, aircraft parts, electrical contacts, industrial motors, and filaments.

    Most high-strength steel alloys (for example, 41xx steels) contain 0.25% to 8% molybdenum. Even in these small portions, more than 43,000 tonnes of molybdenum are used each year in stainless steels, tool steels, cast irons, and high-temperature superalloys.

    Molybdenum is also valued in steel alloys for its high corrosion resistance and weldability. Molybdenum contributes corrosion resistance to type-300 stainless steels (specifically type-316) and especially so in the so-called superaustenitic stainless steels (such as alloy AL-6XN, 254SMO or 1925hMo). Molybdenum increases lattice strain, thus increasing the energy required to dissolve iron atoms from the surface. Molybdenum is also used to enhance the corrosion resistance of ferritic (for example grade 444) and martensitic (for example 1.4122 and 1.4418) stainless steels.

    Because of its lower density and more stable price, molybdenum is sometimes used in place of tungsten. An example is the 'M' series of high-speed steels such as M2, M4 and M42 as substitution for the 'T' steel series, which contain tungsten. Molybdenum can also be used as a flame-resistant coating for other metals. Although its melting point is 2,623 °C (4,753 °F), molybdenum rapidly oxidizes at temperatures above 760 °C (1,400 °F) making it better-suited for use in vacuum environments.

    TZM (Mo (~99%), Ti (~0.5%), Zr (~0.08%) and some C) is a corrosion-resisting molybdenum superalloy that resists molten fluoride salts at temperatures above 1,300 °C (2,370 °F). It has about twice the strength of pure Mo, and is more ductile and more weldable, yet in tests it resisted corrosion of a standard eutectic salt (FLiBe) and salt vapors used in molten salt reactors for 1100 hours with so little corrosion that it was difficult to measure.

    Other molybdenum-based alloys that do not contain iron have only limited applications. For example, because of its resistance to molten zinc, both pure molybdenum and molybdenum/tungsten alloy (70%/30%) are used for piping, stirrers and pump impellers that come into contact with molten zinc.

    Other applications as the pure element

  • Molybdenum powder is used as a fertilizer for some plants, such as cauliflower.
  • Elemental molybdenum is used in NO, NO2, NOx analyzers in power plants for pollution controls. At 350 °C (662 °F), the element acts as a catalyst for NO2/NOx to form NO molecules for detection by infrared light.
  • Molybdenum anodes replace tungsten in certain low voltage X-ray sources for specialized uses such as mammography.
  • The radioactive isotope molybdenum-99 is used to generate technetium-99m, used for medical imaging.
  • Compounds (14% of global use)

  • Molybdenum disulfide (MoS2) is used as a solid lubricant and a high-pressure high-temperature (HPHT) antiwear agent. It forms strong films on metallic surfaces and is a common additive to HPHT greases — in the event of a catastrophic grease failure, a thin layer of molybdenum prevents contact of the lubricated parts. It also has semiconducting properties with distinct advantages over traditional silicon or graphene in electronics applications. MoS2 is also used as a catalyst in hydrocracking of petroleum fractions containing nitrogen, sulfur and oxygen.
  • Molybdenum disilicide (MoSi2) is an electrically conducting ceramic with primary use in heating elements operating at temperatures above 1500 °C in air.
  • Molybdenum trioxide (MoO3) is used as an adhesive between enamels and metals. Lead molybdate (wulfenite) co-precipitated with lead chromate and lead sulfate is a bright-orange pigment used with ceramics and plastics.
  • The molybdenum-based mixed oxides are versatile catalysts in the chemical industry. Some examples are the catalysts for the selective oxidation of propylene to acrolein and acrylic acid, the ammoxidation of propylene to acrylonitrile. Suitable catalysts and process for the direct selective oxidation of propane to acrylic acid are being researched.
  • Ammonium heptamolybdate is used in biological staining.
  • Molybdenum coated soda lime glass is used in CIGS solar cells.
  • Phosphomolybdic acid is a stain used in thin layer chromatography.
  • Molybdenum-99 is a parent radioisotope of the daughter radioisotope technetium-99m, used in many medical procedures. The isotope is handled and stored as the molybdate.
  • Nitrogenases

    The most important role of molybdenum in living organisms is as a metal heteroatom at the active site in certain enzymes. In bacterial nitrogen fixation, the nitrogenase enzyme involved in the terminal step of reducing molecular nitrogen usually contains molybdenum in the active site (though replacement of Mo with iron or vanadium is also known). The structure of the catalytic center of the enzyme is similar to that in iron-sulfur proteins: it incorporates a Fe4S3 and multiple MoFe3S3 clusters.

    The reaction that nitrogenase enzymes perform is:

    N 2 + 8   H + + 8   e + 16   A T P + 16   H 2 O 2   N H 3 + H 2 + 16   A D P + 16   P i

    With protons and electrons from the electron transport chain, nitrogen is reduced to ammonia and free hydrogen gas. This is an energy-using process, requiring the splitting (hydrolysis) of ATP into ADP plus free phosphate (Pi).

    In 2008, evidence was reported that a scarcity of molybdenum in the Earth's early oceans was a limiting factor for nearly two billion years in the further evolution of eukaryotic life (which includes all plants and animals). The chain of causation is as follows:

    1. The relative lack of oxygen in the early ocean resulted in a scarcity in dissolved molybdenum. Most molybdenum compounds have low solubility in water, but the molybdate ion MoO42− is soluble and forms when molybdenum-containing minerals are in contact with oxygen and water.
    2. The lack of dissolved molybdenum limited the growth of prokaryotic nitrogen-fixing bacteria, which require molybdenum-bearing enzymes for the process
    3. The lack of prokaryotic nitrogen-fixing bacteria limited the growth of ocean eukaryotes, which require oxidized nitrogen suitable for the production of organic nitrogen compounds or the organics themselves (like proteins) from prokaryotic bacteria.

    However, once oxygen had been created in seawater by the limited eukaryotes, it reacted with water and the molybdenum in minerals on the sea bottom to produce soluble molybdate, making it available to nitrogen-fixing bacteria. Those bacteria provided fixed usable nitrogen compounds for higher forms of life.

    Although oxygen once promoted nitrogen fixation by making molybdenum available in water, it also directly poisons nitrogenase enzymes. Thus, in Earth's ancient history, after oxygen arrived in large quantities in Earth's air and water, organisms that continued to fix nitrogen in aerobic conditions isolated and protected their nitrogen-fixing enzymes from too much oxygen in heterocysts or equivalent structures. This structural isolation of nitrogen fixation reactions in aerobic organisms continues to the present.

    Molybdenum cofactor enzymes

    Though molybdenum forms compounds with various organic molecules, including carbohydrates and amino acids, it is transported throughout the human body as MoO42−. At least 50 molybdenum-containing enzymes were known by 2002, mostly in bacteria, and the number is increasing with every year; those enzymes include aldehyde oxidase, sulfite oxidase and xanthine oxidase. In some animals, and in humans, the oxidation of xanthine to uric acid, a process of purine catabolism, is catalyzed by xanthine oxidase, a molybdenum-containing enzyme. The activity of xanthine oxidase is directly proportional to the amount of molybdenum in the body. However, an extremely high concentration of molybdenum reverses the trend and can act as an inhibitor in both purine catabolism and other processes. Molybdenum concentration also affects protein synthesis, metabolism, and growth.

    In animals and plants, a tricyclic compound called molybdopterin (which, despite the name, contains no molybdenum) is reacted with molybdate to form a complete molybdenum-containing cofactor called molybdenum cofactor. Other than the phylogenetically-ancient nitrogenases (discussed above) that fix nitrogen in some bacteria and cyanobacteria, all molybdenum-using enzymes (so far identified) use the molybdenum cofactor, where molybdenum is in the oxidation state of VI, similar to molybdate. Molybdenum enzymes in plants and animals catalyze the oxidation and sometimes reduction of certain small molecules in the process of regulating nitrogen, sulfur, and carbon.

    Human dietary intake and deficiency

    Molybdenum is a trace dietary element necessary for the survival of humans and the few mammals that have been studied. Four mammalian Mo-dependent enzymes are known, all of them harboring a pterin-based molybdenum cofactor (Moco) in their active site: sulfite oxidase, xanthine oxidoreductase, aldehyde oxidase, and mitochondrial amidoxime reductase. People severely deficient in molybdenum have poorly functioning sulfite oxidase and are prone to toxic reactions to sulfites in foods. The human body contains about 0.07 mg of molybdenum per kilogram of body weight, with higher concentrations in the liver and kidneys and in lower in the vertebrae. Molybdenum is also present within human tooth enamel and may help prevent its decay.

    The average daily intake of molybdenum varies between 0.12 and 0.24 mg, depending on the molybdenum content of the food. Pork, lamb, and beef liver each have approximately 1.5 parts per million of molybdenum. Other significant dietary sources include green beans, eggs, sunflower seeds, wheat flour, lentils, cucumbers and cereal grain. Acute toxicity has not been seen in humans, and the toxicity depends strongly on the chemical state. Studies on rats show a median lethal dose (LD50) as low as 180 mg/kg for some Mo compounds. Although human toxicity data is unavailable, animal studies have shown that chronic ingestion of more than 10 mg/day of molybdenum can cause diarrhea, growth retardation, infertility, low birth weight, and gout; it can also affect the lungs, kidneys, and liver. Sodium tungstate is a competitive inhibitor of molybdenum. Dietary tungsten reduces the concentration of molybdenum in tissues.

    Low soil concentration of molybdenum in a geographical band from northern China to Iran results in a general dietary molybdenum deficiency, and is associated with increased rates of esophageal cancer. Compared to the United States, which has a greater supply of molybdenum in the soil, people living in those areas have about 16 times greater risk for esophageal squamous cell carcinoma.

    Molybdenum deficiency has also been reported as a consequence of non-molybdenum supplemented total parenteral nutrition (complete intravenous feeding) for long periods of time. It results in high blood levels of sulfite and urate, in much the same way as molybdenum cofactor deficiency. However (presumably since pure molybdenum deficiency from this cause occurs primarily in adults), the neurological consequences are not as marked as in cases of congenital cofactor deficiency.

    A congenital molybdenum cofactor deficiency disease, seen in infants, is an inability to synthesize molybdenum cofactor, a heterocyclic molecule that binds molybdenum at the active site in all known human enzymes that use molybdenum. The resulting deficiency results in high levels of sulfite and urate, and neurological damage.

    Copper-molybdenum antagonism

    High levels of molybdenum can interfere with the body's uptake of copper, producing copper deficiency. Molybdenum prevents plasma proteins from binding to copper, and it also increases the amount of copper that is excreted in urine. Ruminants that consume high levels of molybdenum suffer from diarrhea, stunted growth, anemia, and achromotrichia (loss of fur pigment). These symptoms can be alleviated by copper supplements, either dietary and injection. The effective copper deficiency, can be aggravated by excess sulfur.

    Copper reduction or deficiency can also be deliberately induced for therapeutic purposes by the compound ammonium tetrathiomolybdate, in which the bright red anion tetrathiomolybdate is the copper-chelating agent. Tetrathiomolybdate was first used therapeutically in the treatment of copper toxicosis in animals. It was then introduced as a treatment in Wilson's disease, a hereditary copper metabolism disorder in humans; it acts both by competing with copper absorption in the bowel and by increasing excretion. It has also been found to have an inhibitory effect on angiogenesis, potentially by inhibiting the membrane translocation process that is dependent on copper ions. This is a promising avenue for investigation of treatments for cancer, age-related macular degeneration, and other diseases that involve a pathologic proliferation of blood vessels.

    Precautions

    Molybdenum dusts and fumes, generated by mining or metalworking, can be toxic, especially if ingested (including dust trapped in the sinuses and later swallowed). Low levels of prolonged exposure can cause irritation to the eyes and skin. Direct inhalation or ingestion of molybdenum and its oxides should be avoided. OSHA regulations specify the maximum permissible molybdenum exposure in an 8-hour day as 5 mg/m3. Chronic exposure to 60 to 600 mg/m3 can cause symptoms including fatigue, headaches and joint pains. At levels of 5000 mg/m3, molybdenum is immediately dangerous to life and health.

    References

    Molybdenum Wikipedia