Began operation 9 August 2010 System length 23 km (14 mi) Number of lines 1 First service 9 August 2010 | Operator(s) Rhônexpress Locale Lyon Number of stations 4 | |
 | ||
Transit type Express tram/Express train Number of vehicles 6 Stadler Tango trainsets | ||
Lyon rh nexpress
Rhônexpress is an express tram/express train line which links central Lyon, France, with its airport, Lyon-Saint Exupéry Airport, and the TGV train station located there. The passage from the airport to the city's business center at Part-Dieu Villette (Lyon-Part-Dieu railway station) by way of Vaulx-en-Velin – La Soie (transfer to Metro Line A) and Meyzieu ZI lasts roughly half an hour. It opened on 9 August 2010. The Conseil général of the Rhône franchised the operation of this line for 30 years to Rhônexpress, a consortium including Vinci SA (28.2%), Veolia Transport (28.2%), Vossloh Infrastructure Service (4.2%), Cegelec Centre Est (2.8%) and the Caisse des dépôts et consignations.
Contents
- Lyon rh nexpress
- rh nexpress express transit train lyon st exup ry airport
- Stations
- Rolling stock
- References
The route is served by six tram trainsets, which were built by the Swiss manufacturer Stadler Rail. The route has a length of 23 kilometers (14 mi) and it takes 29 minutes to go from Part-Dieu to the airport; service is every 15 minutes at peak times. The project included building 8.5 kilometers (5.3 mi) of new track, while remainder of the route runs along the tracks of the existing T3 tram line, which is built with passing tracks to allow express service. The service is independently run and is not a part of the TCL system, although it appears on TCL maps.
rh nexpress express transit train lyon st exup ry airport
Stations
Rhônexpress uses the infrastructure of the line T3 built by Sytral (in French, Syndicat mixte des Transports pour le Rhône et l'Agglomération Lyonnaise) up through Meyzieu (a hub for commuters with a large surface parking lot available). From there, all the track used was built specifically for the Rhônexpress all the way to Lyon-Saint Exupéry Airport. There are four stops:
Rolling stock
These six trainset Tango 12s were provided by the Swiss manufacturer Stadler and built at the factory in Berlin Wilhelmsruh.
The rolling stock was chosen after a tender, taking into account the technical criteria (speed up to 100 km/h), robustness, security and compatibility with the common use of infrastructure by the T3 line, economic (capacity adapted to the traffic and prospects for their development) as well as comfort and aesthetics.
The interior and exterior design of the trains for Stadler Tango was created by the agency RCP Design Global (Tours), who had already built the tramways of Le Mans, Angers and Paris. For a picture see the bottom of the page.