Trifluoromethylation

History

The first to investigate trifluoromethyl groups in relationship to biological activity was F. Lehmann in 1927. An early review appeared in 1958. An early synthetic method was developed by Frédéric Swarts in 1892, based on antimony fluoride. In this reaction benzotrichloride was reacted with SbF₃ to form PhCF₂Cl and PhCF₃. In the 1930s Kinetic Chemicals and IG Farben replaced SbF₃ with HF. The McLoughlin-Thrower reaction (1968) is an early coupling reaction using iodofluoroalkanes, iodoaromatic compounds and copper. In 1969 Kobayashi & Kumadaki adapted their protocol for trifluoromethylations.

Trifluoromethyltrimethylsilane

Preparation of the Trifluoromethyltrimethylsilane was reported by Ingo Ruppert in 1984. In 1989, Prakash and Olah first reported activation of TMSCF₃ by fluoride to perform nucleophilic trifluoromethylation of carbonyl compounds. In the same year, Stahly described similar reactions for the synthesis of trifluoromethylated phenols and anilines. Since then TMSCF₃ has been widely used as a nucleophilic trifluoromethylating agent.

An example is the trifluoromethylation of cyclohexanone in THF using tetrabutylammonium fluoride.

The substrates can be aryl halides. Potassium (trifluoromethyl)trimethoxyborate for this purpose has been synthesised from B(OMe)₃, CF₃SiMe₃, and KF. Aryl functionalization via C-H activation has also been reported

Sodium trifluoroacetate

Sodium trifluoroacetate as a reagent for trifluoromethylations was introduced by Matsui in 1981. In the original scope the substrate was an aromatic halide and the metal salt copper(I)iodide.

Trifluoromethane

Fluoroform (CF₃H) has been employed as a trifluoromethylation reagent for aldehydes in combination with a strong base

Trifluoroiodomethane

Trifluoroiodomethane is a reagent in aromatic coupling reactions. It has also been used with enones, for example with chalcone, a reaction catalysed by diethyl zinc and Wilkinson's catalyst:

Trifluoromethyl Sulfone

Trifluoromethyl Sulfone (PhSO₂CF₃) and Trifluoromethyl Sulfoxide (PhSOCF₃) can be used for trifluoromethylations of electrophiles

Trifluoromethanesulfonyl chloride

Trifluoromethanesulfonyl chloride (or Triflyl Chloride, CF3SO2Cl) can be used in a highly efficient method to introduce a trifluoromethyl group to aromatic and heteroaromatic systems, including known pharmaceuticals such as Lipitor. The chemistry is general and mild, and uses a photoredox catalyst and a light source at room temperature.

Sodium trifluoromethanesulfinate

Sodium trifluoromethanesulfinate (CF₃SO₂Na) as a trifluoromethylation reagent was introduced by Langlois in 1991. The reaction requires t-butyl hydroperoxide and generally a metal and proceeds through a radical mechanism. The reagent has been applied with heterocyclic substrates

Umemoto reagents

Umemoto reagents are (trifluoromethyl)dibenzoheterocyclic salts.

Trifluoromethyl-metal reagents

Many CF₃-containing metal complexes have been prepared, and some are useful for trifluoromethylation. The most obvious reagent is CF₃Li, which can be generated by lithium-iodide exchange. This compound is however unstable even at low temperatures. It degrades to lithium fluoride and difluorocarbene. Trifluoromethyl copper(I) reagents are more useful. These reagents are generated in situ by reaction of CF₃I with copper powder in polar solvents. Hg(CF₃)₂, prepared by decarboxylation of the trifluoroacetate, has proven useful for the trifluoromethylation of other metals.

Aromatic coupling reactions

In coupling reactions between aromatic compounds and metal-trifluoromethyl complexes the metal is usually copper, Pd and Ni are less prominent. The reactions are stoichiometric or catalytic. In the McLoughlin-Thrower reaction (1962) iodobenzene reacts with trifluoroiodomethane (CF₃I) and copper powder in dimethylformamide at 150 °C to trifluoromethylbenzene. The intermediate in this reaction type is a perfluoromethyl-metal complex.

A palladium acetate catalysed reaction described in 1982 used zinc powder with the main intermediate believed to be CF₃ZnI with Pd(0) is the active catalyst. The first copper catalysed coupling was reported in 2009 and based on an iodoarene, a trifluoromethylsilane, copper iodide and 1,10-phenanthroline. Variations include another CF₃ donor potassium (trifluoromethyl)trimethoxyborate, the use of aryl boronic acids or the use of a trifluoromethyl sulfonium salt or the use of a trifluoromethylcopper(I) phenanthroline complex. A catalytic palladium catalysed reaction was reported in 2010 using aryl halides, (trifluoromethyl)triethylsilane and allylpalladium chloride dimer

Radical trifluoromethylation

In radical trifluoromethylation the active species is the trifluoromethyl free radical. Reagents such as bromotrifluoromethane and haloform have been used for this purpose but in response to the Montreal Protocol alternatives such as trifluoroiodomethane have been developed as replacement. One particular combination is CF₃I / triethylborane Other reagents that generate the CF₃ radical are sodium trifluoromethanesulfinate and bis(trifluoroacetyl) peroxide.

In the CF₃ radical the fluorine atom is an electron-withdrawing group via the inductive effect but also a weak pi donor through interaction of the fluorine lone pair with the radical center's SOMO. Compared to the methyl radical the CF₃ radical is pyramidal (angle 107.8 °C ) with a large inversion barrier, electrophilic and also more reactive. In reaction with styrene it is 440 times more reactive. An early report (1949) describes the photochemical reaction of iodotrifluoromethane with ethylene to 3-iodo-1,1,1-trifluoropropane. Reagents that have been reported for the direct trifluoromethylation of arenes are CF₃I, CF₃Br (thermal or photochemical), silver trifluoroacetate/TiO2 (photchemical) and sodium trifluoromethanesulfinate/Cu(OSO₂CF₃)₂/tBuOOH.

Nucleophilic trifluoromethylation

In nucleophilic trifluoromethylation the active species is the CF₃⁻ anion. It was, however, widely believed that the trifluoromethyl anion is a transient species and thus cannot be isolated or observed in the condensed phase. Contrary to the popular belief, the CF₃ anion, with [K(18-crown-6)]⁺ as a countercation, was produced and characterized by Prakash and coworkers. The challenges associated with observation of CF₃ anion are alluded to its strong basic nature and its tendency to form pentacoordinated silicon species, such as [Me₃Si(CF₃)₂]⁻ or [Me₃Si(F)(CF₃)]⁻.

The reactivity of fluoroform in combination with a strong base such as t-BuOK with carbonyl compounds in DMF is an example. Here CF₃⁻ and DMF form an hemiaminolate adduct ([Me₂NCH(O)CF₃]K).

Electrophilic trifluoromethylation

In electrophilic trifluoromethylation the active trifluoromethyl donor group carries a positive charge. Production of an CF₃⁺ cation has been described as "extemely hard" The first relevant reagent, a diaryl(trifluoromethyl) sulfonium salt (Ar₂S⁺CF₃SbF₆⁻) was developed in 1984 by reaction of an aryltrifluoromethyl sulfoxide 1 with SF₃⁺SbF₆⁻ followed by reaction with an electron-rich arene. The reagent was used in trifluoromethylation of a thiophenolate. S-(trifluoromethyl)dibenzothiophenium tetrafluoroborate is a commercially available and known trifluoromethylation reagent based on the same principle first documented in 1990. In this type of compound sulfur has been replaced by oxygen, selenium and tellurium. Examples of substrates that have been investigated are pyridine, aniline, triphenylphosphine and the lithium salt of phenylacetylene.

Another group of trifluoromethyl donors are hypervalent iodine(III)–CF₃ reagents for example 3,3-dimethyl-1-(trifluoromethyl)-1,2-benziodoxole. Substrates are thiols, alcohols, phosphines, (hetero) arenes, unactivated olefins and unsaturated carboxylic acids.

The reaction mechanism of electrophilic trifluoromethylations has been described as controversial with polar substitution or single electron transfer as likely candidates

Asymmetric trifluoromethylation

In asymmetric trifluoromethylation the trifluoromethyl group is added to the substrate in an enantioselective way. Ruppert's reagent has been used for this purpose in an asymmetric induction approach to functionalise chiral amino acid derivates, carbohydrates, and steroids. Because Ruppert's reagent requires a tetraalkylammonium fluoride, chiral ammonium fluorides have been employed in asymmetric catalysis. In the field of electrophilic trifluoromethylation an early contribution involved reaction of a metal enolate with a trifluoromethyl chalcogen salt in presence of a chiral boron catalyst

More recent examples of highly enantioselective methods for the α-trifluoromethylation of carbonyls are available through enamine catalysis of aldehydes (photoredox or iodonium), copper catalysis of β-ketoesters, and radical addition to zirconium enolates.