Type Heavy rail Status Operational Termini Doncaster railway station | System National Rail Owner Network Rail | |
 | ||
Locale Yorkshire and the Humber Operator(s) TransPennine Express
Northern
East Midlands Trains Track gauge 1,435 mm (4 ft 8 ⁄2 in) standard gauge | ||
The South Humberside Main Line runs from Doncaster and the East Coast Main Line to Thorne where it diverges from the Sheffield to Hull Line. It then runs eastwards to Scunthorpe and the Humber Ports of Immingham and Grimsby, with the coastal resort of Cleethorpes as terminus.
Contents
Route
From Doncaster the line forms a joint route with the Sheffield-Hull Line to Hatfield, passing Hatfield Colliery where the lines diverge at Thorne Junction. The line runs across Thorne and Hatfield Moors to run along the Stainforth and Keadby Canal towards the River Trent. Close to Keadby Power Station the route turns around Keadby and crosses the river Trent at Keadby Bridge. The line then climbs and passes over the M181 motorway and on viaduct to cross the Lincoln Edge at Scunthorpe. Through Scunthorpe, the line passes through the steelworks into the Ancholme Valley before crossing under the M180 motorway. To the west of Barnetby the line branches further at Wrawby Junction with the Grimsby - Lincoln - Newark line turning south towards Market Rasen, and the Kirton Lindsey line, (formerly a continuation of the Sheffield to Lincoln Line). After Barnetby railway station the line crosses the Lincolnshire Wolds passing quarries at Melton Ross and passes close to Humberside Airport near to where it diverges with the Barton Line and a branch which serves Immingham Docks close to Ulceby. The main line continues to Grimsby roughly parallel with the A180 road though Habrough railway station, Stallingborough railway station, Great Coates railway station to Grimsby railway station. The route then passes Grimsby Docks railway station which is open only during daylight hours, towards Grimsby Docks, and then on to New Clee railway station running along the humber bank/sea wall to Cleethorpes railway station.
Passenger Services
The population in station catchments of the line is 470,000.
The Northern service between Cleethorpes and Barton on Humber uses the line until taking the Barton Line branch. Northern also operate a service between Scunthorpe and Sheffield, calling at intermediate stations.
The Barton Line forms a branch to this line from Ulceby Junction, to Barton upon Humber. Passenger services on the line are provided by Northern until a proposed 2017 transfer to the East Midlands franchise. Services are operated by one Class 153 unit every 2 hours in each direction. Before Class 153s started operating, Pacers and Class 150s were used. On Mondays - Saturdays, the first service of the day from Cleethorpes to Barton-on-Humber, the 06:00 departure, and the 06:58 return are operated by a TransPennine Express Class 185 Desiro unit, although this service does not call at Great Coates and Thornton Abbey due to the low platforms. New Clee is only served by trains on request during daylight hours only.
Service patterns
Freight
The South Humberside Main Line is one of eight national Seven Day Railway Routes, which target the routes with the strongest business case for investment. The port of Immingham is located at the end of the South Humberside Main Line from Doncaster. This generates around one fifth of the total UK freight tonnage with potential for significantly more. This line is therefore a very important route for freight and extra capacity is needed to allow rail to grow with the port. Humber International Terminal stage 2 was completed in 2006 which has doubled the amount of coal the port can handle.
The route from Doncaster to Immingham via Scunthorpe is a key artery for rail freight services conveying approximately 20% of the total rail freight volume moved in the UK, it includes:
These services are also affected:
Totals: 68 freight trains per day, journey each way = 136 paths
There are three tracks between Brocklesby and Wrawby, two in the Doncaster direction and one in the Immingham direction. The line speed also restricts capacity, between Ulceby and Doncaster the line speed is predominately 55 mph, with Wrawby Junction only 30 mph. The line speed between Immingham and Ulceby is mainly 30 mph. Loaded freight trains generally run at 60 mph on other lines, with some modern unloaded trains being capable of 75 mph.
History
The line was initially part of the Manchester, Sheffield and Lincolnshire Railway until the company changed name to the Great Central Railway in 1897. In 1916 the section of route between Wrawby and Brocklesby was quadrupled to cope with the growing amount of freight traffic heading for the docks at Immingham and Grimsby.
Incidents
7 August 2015 a freight train derailed at Foreign Ore junction, Santon near Scunthorpe closing the line. A train previously derailed in this area in 2008.