Internet of things

History

As of 2016, the vision of the Internet of things has evolved due to a convergence of multiple technologies, including ubiquitous wireless communication, real-time analytics, machine learning, commodity sensors, and embedded systems. This means that the traditional fields of embedded systems, wireless sensor networks, control systems, automation (including home and building automation), and others all contribute to enabling the Internet of things (IoT).

The concept of a network of smart devices was discussed as early as 1982, with a modified Coke machine at Carnegie Mellon University becoming the first Internet-connected appliance, able to report its inventory and whether newly loaded drinks were cold. Mark Weiser's seminal 1991 paper on ubiquitous computing, "The Computer of the 21st Century", as well as academic venues such as UbiComp and PerCom produced the contemporary vision of IoT. In 1994 Reza Raji described the concept in IEEE Spectrum as "[moving] small packets of data to a large set of nodes, so as to integrate and automate everything from home appliances to entire factories". Between 1993 and 1996 several companies proposed solutions like Microsoft's at Work or Novell's NEST. However, only in 1999 did the field start gathering momentum. Bill Joy envisioned Device to Device (D2D) communication as part of his "Six Webs" framework, presented at the World Economic Forum at Davos in 1999.

The term "Internet of things" was coined by Peter T. Lewis in a 1985 speech given at a U.S. Federal Communications Commission (FCC) supported wireless session at the Congressional Black Caucus 15th Legislative Weekend Conference. In his speech he states that "The Internet of Things, or IoT, is the integration of people, processes and technology with connectable devices and sensors to enable remote monitoring, status, manipulation and evaluation of trends of such devices."

The concept of the Internet of things became popular in 1999, through the Auto-ID Center at MIT and related market-analysis publications. Radio-frequency identification (RFID) was seen by Kevin Ashton (one of the founders of the original Auto-ID Center) as a prerequisite for the Internet of things at that point. Ashton prefers the phrase "Internet for Things." If all objects and people in daily life were equipped with identifiers, computers could manage and inventory them. Besides using RFID, the tagging of things may be achieved through such technologies as near field communication, barcodes, QR codes and digital watermarking.

In its original interpretation, one of the first consequences of implementing the Internet of things by equipping all objects in the world with minuscule identifying devices or machine-readable identifiers would be to transform daily life. For instance, instant and ceaseless inventory control would become ubiquitous. A person's ability to interact with objects could be altered remotely based on immediate or present needs, in accordance with existing end-user agreements. For example, such technology could grant motion-picture publishers much more control over end-user private devices by remotely enforcing copyright restrictions and digital rights management, so the ability of a customer who bought a Blu-ray disc to watch the movie could become dependent on the copyright holder's decision, similar to Circuit City's failed DIVX.

Applications

According to Gartner, Inc. (a technology research and advisory corporation), there will be nearly 20.8 billion devices on the Internet of things by 2020. ABI Research estimates that more than 30 billion devices will be wirelessly connected to the Internet of things by 2020. As per a 2014 survey and study done by Pew Research Internet Project, a large majority of the technology experts and engaged Internet users who responded—83 percent—agreed with the notion that the Internet/Cloud of Things, embedded and wearable computing (and the corresponding dynamic systems) will have widespread and beneficial effects by 2025. As such, it is clear that the IoT will consist of a very large number of devices being connected to the Internet. In an active move to accommodate new and emerging technological innovation, the UK Government, in their 2015 budget, allocated £40,000,000 towards research into the Internet of things. The former British Chancellor of the Exchequer George Osborne, posited that the Internet of things is the next stage of the information revolution and referenced the inter-connectivity of everything from urban transport to medical devices to household appliances.

Integration with the Internet implies that devices will use an IP address as a unique identifier. However, due to the limited address space of IPv4 (which allows for 4.3 billion unique addresses), objects in the IoT will have to use IPv6 to accommodate the extremely large address space required. Objects in the IoT will not only be devices with sensory capabilities, but also provide actuation capabilities (e.g., bulbs or locks controlled over the Internet). To a large extent, the future of the Internet of things will not be possible without the support of IPv6; and consequently the global adoption of IPv6 in the coming years will be critical for the successful development of the IoT in the future.

The ability to network embedded devices with limited CPU, memory and power resources means that IoT finds applications in nearly every field. Such systems could be in charge of collecting information in settings ranging from natural ecosystems to buildings and factories, thereby finding applications in fields of environmental sensing and urban planning.

On the other hand, IoT systems could also be responsible for performing actions, not just sensing things. Intelligent shopping systems, for example, could monitor specific users' purchasing habits in a store by tracking their specific mobile phones. These users could then be provided with special offers on their favorite products, or even location of items that they need, which their fridge has automatically conveyed to the phone. Additional examples of sensing and actuating are reflected in applications that deal with heat, water, electricity and energy management, as well as cruise-assisting transportation systems. Other applications that the Internet of things can provide is enabling extended home security features and home automation. The concept of an "Internet of living things" has been proposed to describe networks of biological sensors that could use cloud-based analyses to allow users to study DNA or other molecules.

However, the application of the IoT is not only restricted to these areas. Other specialized use cases of the IoT may also exist. An overview of some of the most prominent application areas is provided here. Based on the application domain, IoT products can be classified broadly into five different categories: smart wearable, smart home, smart city, smart environment, and smart enterprise. The IoT products and solutions in each of these markets have different characteristics.

Media

In order to hone the manner in which things, media and big data are interconnected, it is first necessary to provide some context into the mechanism used for media process. It has been suggested by Nick Couldry and Joseph Turow that practitioners in media approach big data as many actionable points of information about millions of individuals. The industry appears to be moving away from the traditional approach of using specific media environments such as newspapers, magazines, or television shows and instead tap into consumers with technologies that reach targeted people at optimal times in optimal locations. The ultimate aim is of course to serve, or convey, a message or content that is (statistically speaking) in line with the consumer's mindset. For example, publishing environments are increasingly tailoring the messages (advertisements) and content (articles) to appeal to consumers that have been exclusively gleaned through various data-mining activities.

The media industries process big data in a dual, interconnected manner:

Thus, the Internet of things creates an opportunity to measure, collect and analyse an ever-increasing variety of behavioural statistics. Cross-correlation of this data could revolutionise the targeted marketing of products and services. For example, as noted by Danny Meadows-Klue, the combination of analytics for conversion tracking with behavioural targeting has unlocked a new level of precision that enables display advertising to be focused on the devices of people with relevant interests. Big data and the IoT work in conjunction. From a media perspective, data is the key derivative of device interconnectivity, whilst being pivotal in allowing clearer accuracy in targeting. The Internet of things therefore transforms the media industry, companies and even governments, opening up a new era of economic growth and competitiveness. The wealth of data generated by this industry (i.e. big data) will allow practitioners in advertising and media to gain an elaborate layer on the present targeting mechanisms used by the industry.

Environmental monitoring

Environmental monitoring applications of the IoT typically use sensors to assist in environmental protection by monitoring air or water quality, atmospheric or soil conditions, and can even include areas like monitoring the movements of wildlife and their habitats. Development of resource constrained devices connected to the Internet also means that other applications like earthquake or tsunami early-warning systems can also be used by emergency services to provide more effective aid. IoT devices in this application typically span a large geographic area and can also be mobile. It has been argued that the standardization IoT brings to wireless sensing will revolutionize this area.

Infrastructure management

Monitoring and controlling operations of urban and rural infrastructures like bridges, railway tracks, on- and offshore- wind-farms is a key application of the IoT. The IoT infrastructure can be used for monitoring any events or changes in structural conditions that can compromise safety and increase risk. It can also be used for scheduling repair and maintenance activities in an efficient manner, by coordinating tasks between different service providers and users of these facilities. IoT devices can also be used to control critical infrastructure like bridges to provide access to ships. Usage of IoT devices for monitoring and operating infrastructure is likely to improve incident management and emergency response coordination, and quality of service, up-times and reduce costs of operation in all infrastructure related areas. Even areas such as waste management can benefit from automation and optimization that could be brought in by the IoT.

Manufacturing

Network control and management of manufacturing equipment, asset and situation management, or manufacturing process control bring the IoT within the realm of industrial applications and smart manufacturing as well. The IoT intelligent systems enable rapid manufacturing of new products, dynamic response to product demands, and real-time optimization of manufacturing production and supply chain networks, by networking machinery, sensors and control systems together.

Digital control systems to automate process controls, operator tools and service information systems to optimize plant safety and security are within the purview of the IoT. But it also extends itself to asset management via predictive maintenance, statistical evaluation, and measurements to maximize reliability. Smart industrial management systems can also be integrated with the Smart Grid, thereby enabling real-time energy optimization. Measurements, automated controls, plant optimization, health and safety management, and other functions are provided by a large number of networked sensors.

National Science Foundation established an Industry/University Cooperative Research Center on intelligent maintenance systems (IMS) in 2001 with a research focus to use IoT-based predictive analytics technologies to monitor connected machines and to predict machine degradation, and further to prevent potential failures. The vision to achieve near-zero breakdown using IoT-based predictive analytics led the future development of e-manufacturing and e-maintenance activities.

The term IIoT (Industrial Internet of Things) is often encountered in the manufacturing industries, referring to the industrial subset of the IoT. IIoT in manufacturing would probably generate so much business value that it will eventually lead to the fourth industrial revolution, so the so-called Industry 4.0. It is estimated that in the future, successful companies will be able to increase their revenue through Internet of things by creating new business models and improve productivity, exploit analytics for innovation, and transform workforce. The potential of growth by implementing IIoT will generate $12 trillion of global GDP by 2030.

While connectivity and data acquisition are imperative for IIoT, they should not be the purpose, rather the foundation and path to something bigger. Among all the technologies, predictive maintenance is probably a relatively "easier win" since it is applicable to existing assets and management systems. The objective of intelligent maintenance systems is to reduce unexpected downtime and increase productivity. And to realize that alone would generate around up to 30% over total maintenance costs. Industrial big data analytics will play a vital role in manufacturing asset predictive maintenance, although that is not the only capability of industrial big data. Cyber-physical systems (CPS) is the core technology of industrial big data and it will be an interface between human and the cyber world. Cyber-physical systems can be designed by following the 5C (connection, conversion, cyber, cognition, configuration) architecture, and it will transform the collected data into actionable information, and eventually interfere with the physical assets to optimize processes.

An IoT-enabled intelligent system of such cases has been demonstrated by the NSF Industry/University Collaborative Research Center for Intelligent Maintenance Systems (IMS) at University of Cincinnati on a band saw machine in IMTS 2014 in Chicago. Band saw machines are not necessarily expensive, but the band saw belt expenses are enormous since they degrade much faster. However, without sensing and intelligent analytics, it can be only determined by experience when the band saw belt will actually break. The developed prognostics system will be able to recognize and monitor the degradation of band saw belts even if the condition is changing, so that users will know in near real time when is the best time to replace band saw. This will significantly improve user experience and operator safety, and save costs on replacing band saw belts before they actually break. The developed analytical algorithms were realized on a cloud server, and was made accessible via the Internet and on mobile devices.

Energy management

Integration of sensing and actuation systems, connected to the Internet, is likely to optimize energy consumption as a whole. It is expected that IoT devices will be integrated into all forms of energy consuming devices (switches, power outlets, bulbs, televisions, etc.) and be able to communicate with the utility supply company in order to effectively balance power generation and energy usage. Such devices would also offer the opportunity for users to remotely control their devices, or centrally manage them via a cloud based interface, and enable advanced functions like scheduling (e.g., remotely powering on or off heating systems, controlling ovens, changing lighting conditions etc.).

Besides home based energy management, the IoT is especially relevant to the Smart Grid since it provides systems to gather and act on energy and power-related information in an automated fashion with the goal to improve the efficiency, reliability, economics, and sustainability of the production and distribution of electricity. Using advanced metering infrastructure (AMI) devices connected to the Internet backbone, electric utilities can not only collect data from end-user connections, but also manage other distribution automation devices like transformers and reclosers.

Medical and healthcare

IoT devices can be used to enable remote health monitoring and emergency notification systems. These health monitoring devices can range from blood pressure and heart rate monitors to advanced devices capable of monitoring specialized implants, such as pacemakers Fitbit electronic wristbands or advanced hearing aids. Some hospitals have begun implementing "smart beds" that can detect when they are occupied and when a patient is attempting to get up. It can also adjust itself to ensure appropriate pressure and support is applied to the patient without the manual interaction of nurses. Specialized sensors can also be equipped within living spaces to monitor the health and general well-being of senior citizens, while also ensuring that proper treatment is being administered and assisting people regain lost mobility via therapy as well. Other consumer devices to encourage healthy living, such as, connected scales or wearable heart monitors, are also a possibility with the IoT. More and more end-to-end health monitoring IoT platforms are coming up for antenatal and chronic patients, helping one manage health vitals and recurring medication requirements.

Building and home automation

IoT devices can be used to monitor and control the mechanical, electrical and electronic systems used in various types of buildings (e.g., public and private, industrial, institutions, or residential) in home automation and building automation systems.

Transportation

The IoT can assist in integration of communications, control, and information processing across various transportation systems. Application of the IoT extends to all aspects of transportation systems (i.e. the vehicle, the infrastructure, and the driver or user). Dynamic interaction between these components of a transport system enables inter and intra vehicular communication, smart traffic control, smart parking, electronic toll collection systems, logistic and fleet management, vehicle control, and safety and road assistance.

Metropolitan scale deployments

There are several planned or ongoing large-scale deployments of the IoT, to enable better management of cities and systems. For example, Songdo, South Korea, the first of its kind fully equipped and wired smart city, is near completion. Nearly everything in this city is planned to be wired, connected and turned into a constant stream of data that would be monitored and analyzed by an array of computers with little, or no human intervention.

Another application is a currently undergoing project in Santander, Spain. For this deployment, two approaches have been adopted. This city of 180,000 inhabitants, has already seen 18,000 city application downloads for their smartphones. This application is connected to 10,000 sensors that enable services like parking search, environmental monitoring, digital city agenda among others. City context information is used in this deployment so as to benefit merchants through a spark deals mechanism based on city behavior that aims at maximizing the impact of each notification.

Other examples of large-scale deployments underway include the Sino-Singapore Guangzhou Knowledge City; work on improving air and water quality, reducing noise pollution, and increasing transportation efficiency in San Jose, California; and smart traffic management in western Singapore. French company, Sigfox, commenced building an ultra-narrowband wireless data network in the San Francisco Bay Area in 2014, the first business to achieve such a deployment in the U.S. It subsequently announced it would set up a total of 4000 base stations to cover a total of 30 cities in the U.S. by the end of 2016, making it the largest IoT network coverage provider in the country thus far.

Another example of a large deployment is the one completed by New York Waterways in New York City to connect all the city's vessels and be able to monitor them live 24/7. The network was designed and engineered by Fluidmesh Networks, a Chicago-based company developing wireless networks for critical applications. The NYWW network is currently providing coverage on the Hudson River, East River, and Upper New York Bay. With the wireless network in place, NY Waterway is able to take control of its fleet and passengers in a way that was not previously possible. New applications can include security, energy and fleet management, digital signage, public Wi-Fi, paperless ticketing and others.

Consumer application

A growing portion of IoT devices are created for consumer use. Examples of consumer applications include connected car, entertainment, residences and smart homes, wearable technology, quantified self, connected health, and smart retail. Consumer IoT provides new opportunities for user experience and interfaces.

Some consumer applications have been criticized for their lack of redundancy and their inconsistency, leading to a popular parody known as the “Internet of Shit.” Companies have been criticized for their rush into IoT, creating devices of questionable value, and not setting up stringent security standards.

Unique addressability of things

The original idea of the Auto-ID Center is based on RFID-tags and unique identification through the Electronic Product Code however this has evolved into objects having an IP address or URI.

An alternative view, from the world of the Semantic Web focuses instead on making all things (not just those electronic, smart, or RFID-enabled) addressable by the existing naming protocols, such as URI. The objects themselves do not converse, but they may now be referred to by other agents, such as powerful centralized servers acting for their human owners.

The next generation of Internet applications using Internet Protocol version 6 (IPv6) would be able to communicate with devices attached to virtually all human-made objects because of the extremely large address space of the IPv6 protocol. This system would therefore be able to scale to the large numbers of objects envisaged.

A combination of these ideas can be found in the current GS1/EPCglobal EPC Information Services (EPCIS) specifications. This system is being used to identify objects in industries ranging from aerospace to fast moving consumer products and transportation logistics.

Intelligence

Ambient intelligence and autonomous control are not part of the original concept of the Internet of things. Ambient intelligence and autonomous control do not necessarily require Internet structures, either. However, there is a shift in research to integrate the concepts of the Internet of things and autonomous control, with initial outcomes towards this direction considering objects as the driving force for autonomous IoT.

In the future the Internet of things may be a non-deterministic and open network in which auto-organized or intelligent entities (Web services, SOA components), virtual objects (avatars) will be interoperable and able to act independently (pursuing their own objectives or shared ones) depending on the context, circumstances or environments. Autonomous behavior through the collection and reasoning of context information as well as the objects ability to detect changes in the environment, faults affecting sensors and introduce suitable mitigation measures constitute a major research trend, clearly needed to provide credibility to the IoT technology. Modern IoT products and solutions in the marketplace use a variety of different technologies to support such context-aware automation but more sophisticated forms of intelligence are requested to permit sensor units to be deployed in real environments.

Architecture

The system will likely be an example of event-driven architecture, bottom-up made (based on the context of processes and operations, in real-time) and will consider any subsidiary level. Therefore, model driven and functional approaches will coexist with new ones able to treat exceptions and unusual evolution of processes (multi-agent systems, B-ADSc, etc.).

In an Internet of things, the meaning of an event will not necessarily be based on a deterministic or syntactic model but would instead be based on the context of the event itself: this will also be a semantic web. Consequently, it will not necessarily need common standards that would not be able to address every context or use: some actors (services, components, avatars) will accordingly be self-referenced and, if ever needed, adaptive to existing common standards (predicting everything would be no more than defining a "global finality" for everything that is just not possible with any of the current top-down approaches and standardizations). Some researchers argue that sensor networks are the most essential components of the Internet of things.

Building on top of the Internet of things, the web of things is an architecture for the application layer of the Internet of things looking at the convergence of data from IoT devices into Web applications to create innovative use-cases. In order to program and control the flow of information in the Internet of things, a predicted architectural direction is being called BPM Everywhere which is a blending of traditional process management with process mining and special capabilities to automate the control of large numbers of coordinated devices.

The Internet of things requires huge scalability in the network space to handle the surge of devices. IETF 6LoWPAN would be used to connect devices to IP networks. With billions of devices being added to the Internet space, IPv6 will play a major role in handling the network layer scalability. IETF's Constrained Application Protocol, MQTT and ZeroMQ would provide lightweight data transport.

Fog computing is a viable alternative to prevent such large burst of data flow through Internet. The edge devices' computation power can be used to analyse and process data, thus providing easy real time scalability.

Complexity

In semi-open or closed loops (i.e. value chains, whenever a global finality can be settled) IoT will often be considered and studied as a complex system due to the huge number of different links, interactions between autonomous actors, and its capacity to integrate new actors. At the overall stage (full open loop) it will likely be seen as a chaotic environment (since systems always have finality). As a practical approach, not all elements in the Internet of things run in a global, public space. Subsystems are often implemented to mitigate the risks of privacy, control and reliability. For example, Domestic Robotics (Domotics) running inside a smart home might only share data within and be available via a local network.

Size considerations

The Internet of things would encode 50 to 100 trillion objects, and be able to follow the movement of those objects. Human beings in surveyed urban environments are each surrounded by 1000 to 5000 trackable objects.

Space considerations

In the Internet of things, the precise geographic location of a thing—and also the precise geographic dimensions of a thing—will be critical. Therefore, facts about a thing, such as its location in time and space, have been less critical to track because the person processing the information can decide whether or not that information was important to the action being taken, and if so, add the missing information (or decide to not take the action). (Note that some things in the Internet of things will be sensors, and sensor location is usually important.) The GeoWeb and Digital Earth are promising applications that become possible when things can become organized and connected by location. However, the challenges that remain include the constraints of variable spatial scales, the need to handle massive amounts of data, and an indexing for fast search and neighbor operations. In the Internet of things, if things are able to take actions on their own initiative, this human-centric mediation role is eliminated. Thus, the time-space context that we as humans take for granted must be given a central role in this information ecosystem. Just as standards play a key role in the Internet and the Web, geospatial standards will play a key role in the Internet of things.

Sectors

There are three core sectors of the IoT: enterprise, home, and government, with the Enterprise Internet of Things (EIoT) being the largest of the three. By 2019, the EIoT sector is estimated to account for nearly 40% or 9.1 billion devices.

A Solution to "basket of remotes"

According to the CEO of Cisco, the commercial opportunity for "connected products ranging from cars to household goods" is expected to be a $USD 19 trillion. Many IoT devices have a potential to take a piece of this market. Jean-Louis Gassée (Apple initial alumni team, and BeOS co-founder) has addressed this topic in an article on Monday Note, where he predicts that the most likely problem will be what he calls the "basket of remotes" problem, where we'll have hundreds of applications to interface with hundreds of devices that don't share protocols for speaking with one another.

There are multiple approaches to solve this problem, one of them called the "predictive interaction", where cloud or fog based decision makers will predict the user's next action and trigger some reaction.

For user interaction, new technology leaders are joining forces to create standards for communication between devices. While AllJoyn alliance is composed of the top 20 World technology leaders, there are also big companies that promote their own protocol like CCF from Intel.

Manufacturers are becoming more conscious of this problem, and many companies have begun releasing their devices with open APIs. Many of these APIs are used by smaller companies looking to take advantage of quick integration.

Frameworks

IoT frameworks might help support the interaction between "things" and allow for more complex structures like distributed computing and the development of distributed applications. Currently, some IoT frameworks seem to focus on real time data logging solutions like Jasper Technologies, Inc. and Xively (formerly Cosm and before that Pachube), offering some basis to work with many "things" and have them interact. Future developments might lead to specific software-development environments to create the software to work with the hardware used in the Internet of things. Companies are developing technology platforms to provide this type of functionality for the Internet of things. Newer platforms are being developed, which add more intelligence. Foremost, IBM has announced cognitive IoT, which combines traditional IoT with machine intelligence and learning, contextual information, industry-specific models and even natural language processing. The XMPP Standards Foundation (XSF) is creating such a framework in a fully open standard that is neither tied to any company nor connected to any cloud services. This XMPP initiative is called Chatty Things. XMPP provides a set of needed building blocks and a proven distributed solution that can scale with high security levels.

REST is a scalable architecture that allows things to communicate over Hypertext Transfer Protocol and is easily adopted for IoT applications to provide communication from a thing to a central web server.

MQTT is a publish-subscribe architecture on top of TCP/IP which allows bi-directional communication between a thing and a MQTT broker.

Standards and standards organizations

This is a list of technical standards for the IoT, most of which are open standards, and the standards organizations that aspire to successfully setting them.

Enabling technologies for IoT

There are many technologies that enable IoT. Crucial to the field is the network used to communicate between devices of an IoT installation, a role that several wireless or wired technologies may fulfill:

Short-range wireless

Medium-range wireless

Long-range wireless

Wired

Simulation

IoT modeling and simulation (and emulation) is typically carried out at the design stage before deployment of the network. Network simulators like OPNET, NetSim and NS2 can be used to simulate IoT networks.

Politics and civic engagement

Some scholars and activists argue that the IoT can be used to create new models of civic engagement if device networks can be open to user control and inter-operable platforms. Philip N. Howard, a professor and author, writes that political life in both democracies and authoritarian regimes will be shaped by the way the IoT will be used for civic engagement. For that to happen, he argues that any connected device should be able to divulge a list of the "ultimate beneficiaries" of its sensor data and that individual citizens should be able to add new organizations to the beneficiary list. In addition, he argues that civil society groups need to start developing their IoT strategy for making use of data and engaging with the public.

Government regulation on IoT

One of the key drivers of the IoT is data. The success of the idea of connecting devices to make them more efficient is dependent upon access to and storage & processing of data. For this purpose, companies working on IoT collect data from multiple sources and store it in their cloud network for further processing. This leaves the door wide open for privacy and security dangers and single point vulnerability of multiple systems. The other issues pertain to consumer choice and ownership of data and how it is used. Presently the regulators have shown more interest in protecting the first three issues identified above.

Current regulatory environment:

A report published by the Federal Trade Commission (FTC) in January 2015 made the following three recommendations:

However, the FTC stopped at just making recommendations for now. According to an FTC analysis, the existing framework, consisting of the FTC Act, the Fair Credit Reporting Act, and the Children’s Online Privacy Protection Act, along with developing consumer education and business guidance, participation in multi-stakeholder efforts and advocacy to other agencies at the federal, state and local level, is sufficient to protect consumer rights.

A resolution passed by the Senate in March 2015, is already being considered by the Congress. This resolution recognized the need for formulating a National Policy on IoT and the matter of privacy, security and spectrum . Furthermore, to provide an impetus to the IoT ecosystem, in March 2016, a bipartisan group of four Senators proposed a bill, The Developing Innovation and Growing the Internet of Things (DIGIT) Act, to direct the Federal Communications Commission to assess the need for more spectrum to connect IoT devices.

Several standards for the IoT industry are actually being established relating to automobiles because most concerns arising from use of connected cars apply to healthcare devices as well. In fact, the National Highway Traffic Safety Administration (NHTSA) is preparing cybersecurity guidelines and a database of best practices to make automotive computer systems more secure.

Platform fragmentation

IoT suffers from platform fragmentation and lack of technical standards a situation where the variety of IoT devices, in terms of both hardware variations and differences in the software running on them, makes the task of developing applications that work consistently between different inconsistent technology ecosystems hard. Customers may be hesitant to bet their IoT future on a proprietary software or hardware devices that uses proprietary protocols that may fade or become difficult to customize and interconnect.

IoT's amorphous computing nature is also a problem for security, since patches to bugs found in the core operating system often do not reach users of older and lower-price devices. One set of researchers say that the failure of vendors to support older devices with patches and updates leaves more than 87% of active devices vulnerable.

Privacy, autonomy and control

Philip N. Howard, a professor and author, writes that the Internet of things offers immense potential for empowering citizens, making government transparent, and broadening information access. Howard cautions, however, that privacy threats are enormous, as is the potential for social control and political manipulation.

Concerns about privacy have led many to consider the possibility that big data infrastructures such as the Internet of things and Data Mining are inherently incompatible with privacy. Writer Adam Greenfield claims that these technologies are not only an invasion of public space but are also being used to perpetuate normative behavior, citing an instance of billboards with hidden cameras that tracked the demographics of passersby who stopped to read the advertisement.

The Internet of Things Council compared the increased prevalence of digital surveillance due to the Internet of things to the conceptual panopticon described by Jeremy Bentham in the 18th Century. The assertion was defended by the works of French philosophers Michel Foucault and Gilles Deleuze. In Discipline and Punish: The Birth of the Prison Foucault asserts that the panopticon was a central element of the discipline society developed during the Industrial Era. Foucault also argued that the discipline systems established in factories and school reflected Bentham's vision of panopticism. In his 1992 paper "Postscripts on the Societies of Control," Deleuze wrote that the discipline society had transitioned into a control society, with the computer replacing the panopticon as an instrument of discipline and control while still maintaining the qualities similar to that of panopticism.

The privacy of households could be compromised by solely analyzing smart home network traffic patterns without dissecting the contents of encrypted application data, yet a synthetic packet injection scheme can be used to safely overcome such invasion of privacy.

Peter-Paul Verbeek, a professor of philosophy of technology at the University of Twente, Netherlands, writes that technology already influences our moral decision making, which in turn affects human agency, privacy and autonomy. He cautions against viewing technology merely as a human tool and advocates instead to consider it as an active agent.

Justin Brookman, of the Center for Democracy and Technology, expressed concern regarding the impact of IoT on consumer privacy, saying that "There are some people in the commercial space who say, 'Oh, big data — well, let's collect everything, keep it around forever, we'll pay for somebody to think about security later.' The question is whether we want to have some sort of policy framework in place to limit that."

Tim O'Reilly believes that the way companies sell the IoT devices on consumers are misplaced, disputing the notion that the IoT is about gaining efficiency from putting all kinds of devices online and postulating that "IoT is really about human augmentation. The applications are profoundly different when you have sensors and data driving the decision-making."

Editorials at WIRED have also expressed concern, one stating "What you're about to lose is your privacy. Actually, it's worse than that. You aren't just going to lose your privacy, you're going to have to watch the very concept of privacy be rewritten under your nose."

The American Civil Liberties Union (ACLU) expressed concern regarding the ability of IoT to erode people's control over their own lives. The ACLU wrote that "There's simply no way to forecast how these immense powers – disproportionately accumulating in the hands of corporations seeking financial advantage and governments craving ever more control – will be used. Chances are big data and the Internet of Things will make it harder for us to control our own lives, as we grow increasingly transparent to powerful corporations and government institutions that are becoming more opaque to us."

Researchers have identified privacy challenges faced by all stakeholders in IoT domain, from the manufacturers and app developers to the consumers themselves, and examined the responsibility of each party in order to ensure user privacy at all times. Problems highlighted by the report include:

In response to rising concerns about privacy and smart technology, in 2007 the British Government stated it would follow formal Privacy by Design principles when implementing their smart metering program. The program would lead to replacement of traditional power meters with smart power meters, which could track and manage energy usage more accurately. However the British Computer Society is doubtful these principles were ever actually implemented. In 2009 the Dutch Parliament rejected a similar smart metering program, basing their decision on privacy concerns. The Dutch program later revised and passed in 2011.

Data storage and analytics

A challenge for producers of IoT applications is to clean, process and interpret the vast amount of data which is gathered by the sensors. There is a solution proposed for the analytics of the information referred to as Wireless Sensor Networks. These networks share data among sensor nodes that are send to a distributed system for the analytics of the sensory data.

Another challenge is the storage of this bulk data. Depending on the application there could be high data acquisition requirements which in turn lead to high storage requirements. Currently the internet is already responsible for 5% of the total energy generated and this consumption will increase significantly when we start utilizing applications with multiple embedded sensors.

Security

Concerns have been raised that the Internet of things is being developed rapidly without appropriate consideration of the profound security challenges involved and the regulatory changes that might be necessary. According to the Business Insider Intelligence Survey conducted in the last quarter of 2014, 39% of the respondents said that security is the biggest concern in adopting Internet of things technology. In particular, as the Internet of things spreads widely, cyber attacks are likely to become an increasingly physical (rather than simply virtual) threat. In a January 2014 article in Forbes, cybersecurity columnist Joseph Steinberg listed many Internet-connected appliances that can already "spy on people in their own homes" including televisions, kitchen appliances, cameras, and thermostats. Computer-controlled devices in automobiles such as brakes, engine, locks, hood and truck releases, horn, heat, and dashboard have been shown to be vulnerable to attackers who have access to the onboard network. In some cases, vehicle computer systems are Internet-connected, allowing them to be exploited remotely. By 2008 security researchers had shown the ability to remotely control pacemakers without authority. Later hackers demonstrated remote control of insulin pumps and implantable cardioverter defibrillators. David Pogue wrote that some recently published reports about hackers remotely controlling certain functions of automobiles were not as serious as one might otherwise guess because of various mitigating circumstances; such as the bug that allowed the hack having been fixed before the report was published, or that the hack required security researchers having physical access to the car prior to the hack to prepare for it.

The U.S. National Intelligence Council in an unclassified report maintains that it would be hard to deny "access to networks of sensors and remotely-controlled objects by enemies of the United States, criminals, and mischief makers... An open market for aggregated sensor data could serve the interests of commerce and security no less than it helps criminals and spies identify vulnerable targets. Thus, massively parallel sensor fusion may undermine social cohesion, if it proves to be fundamentally incompatible with Fourth-Amendment guarantees against unreasonable search." In general, the intelligence community views the Internet of things as a rich source of data.

As a response to increasing concerns over security, the Internet of Things Security Foundation (IoTSF) was launched on 23 September 2015. IoTSF has a mission to secure the Internet of things by promoting knowledge and best practice. Its founding board is made from technology providers and telecommunications companies including BT, Vodafone, Imagination Technologies and Pen Test Partners.

In 2016, a distributed denial of service attack powered by Internet of things devices running the Mirai malware took down a DNS provider and major web sites.

Design

Given widespread recognition of the evolving nature of the design and management of the Internet of things, sustainable and secure deployment of IoT solutions must design for "anarchic scalability." Application of the concept of anarchic scalability can be extended to physical systems (i.e. controlled real-world objects), by virtue of those systems being designed to account for uncertain management futures. This "hard anarchic scalability" thus provides a pathway forward to fully realize the potential of Internet of things solutions by selectively constraining physical systems to allow for all management regimes without risking physical failure.

Brown University computer scientist Michael Littman has argued that successful execution of the Internet of things requires consideration of the interface's usability as well as the technology itself. These interfaces need to be not only more user-friendly but also better integrated: "If users need to learn different interfaces for their vacuums, their locks, their sprinklers, their lights, and their coffeemakers, it's tough to say that their lives have been made any easier."

Environmental sustainability impact

A concern regarding Internet of things technologies pertains to the environmental impacts of the manufacture, use, and eventual disposal of all these semiconductor-rich devices. Modern electronics are replete with a wide variety of heavy metals and rare-earth metals, as well as highly toxic synthetic chemicals. This makes them extremely difficult to properly recycle. Electronic components are often incinerated or placed in regular landfills. Furthermore, the human and environmental cost of mining the rare-earth metals that are integral to modern electronic components continues to grow. With production of electronic equipment growing globally yet little of the metals (from end-of-life equipment) are being recovered for reuse, the environmental impacts can be expected to increase.

Also, because the concept of Internet of things entails adding electronics to mundane devices (for example, simple light switches), and because the major driver for replacement of electronic components is often technological obsolescence rather than actual failure to function, it is reasonable to expect that items that previously were kept in service for many decades would see an accelerated replacement cycle if they were part of the IoT. For example, a traditional house built with 30 light switches and 30 electrical outlets might stand for 50 years, with all those components still original at the end of that period. But a modern house built with the same number of switches and outlets set up for IoT might see each switch and outlet replaced at five-year intervals, in order to keep up to date with technological changes. This translates into a ten-fold increase in waste requiring disposal.

Intentional obsolescence of devices

The Electronic Frontier Foundation has raised concerns that companies can use the technologies necessary to support connected devices to intentionally disable or "brick" their customers' devices via a remote software update or by disabling a service necessary to the operation of the device. In one example, home automation devices sold with the promise of a "Lifetime Subscription" were rendered useless after Nest Labs acquired Revolv and made the decision to shut down the central servers the Revolv devices had used to operate. As Nest is a company owned by Alphabet (Google's parent company), the EFF argues this sets a "terrible precedent for a company with ambitions to sell self-driving cars, medical devices, and other high-end gadgets that may be essential to a person's livelihood or physical safety."

Owners should be free to point their devices to a different server or collaborate on improved software. But such action violates the United States DMCA section 1201, which only has an exemption for "local use". This forces tinkerers who want to keep using their own equipment into a legal grey area. EFF thinks buyers should refuse electronics and software that prioritize the manufacturer's wishes above their own.

Examples of post-sale manipulations include Google Nest Revolv, disabled privacy settings on Android, Sony disabling GNU/Linux on PlayStation 3, enforced EULA on Wii U.