Kalpana Kalpana (Editor)

Tebaldi Zari

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Top speed
  
255 km/h

Length
  
7.8 m

Wingspan
  
9 m

First flight
  
1919

Tebaldi-Zari httpsuploadwikimediaorgwikipediacommonsthu

Manufacturer
  
Società Italiana Ernesto Breda

The Tebaldi-Zari was an Italian fighter prototype of 1919. The Breda company later acquired the rights to it.

Contents

Design and development

An engineer named Tebaldi designed the Tebaldi-Zari, which was a single-seat wooden sesquiplane with heavily staggered wings and a 142 kW (190 hp) Isotta-Fraschini water-cooled V6 engine driving a two-bladed tractor propeller. Its fixed, tailskid landing gear was of very unusual configuration; the main gear was of very wide track and had oversized main wheels with their axle incorporated into the lower wing.

The Zari brothers' factory in Bovisio Mombello, Milan, manufactured the Tebaldi-Zari prototype in 1919, but Breda soon bought both the prototype and the design rights to the aircraft from Zari. Breda re-engined the prototype with a 224 kW (300 hp) Hispano-Suiza HS 42 eight-cylinder water-cooled engine. In 1922, it drafted an agreement with the Italian government to produce three more aircraft, but no production order followed.

Undaunted, Breda modified the original prototype by arming it with two fixed, forward-firing 7.7-millimeter (0.303-inch) Vickers machine guns, modifying its upper wing so that it had a longer span and narrower chord, reducing the wing stagger, increasing the gap between the upper wing and fuselage, and increasing the angle of the outer struts so that they attached to the axle of the main wheels allowing the outer wing panels to be removed whenever a desire existed to test the Tebaldi-Zari as a sesquiplane. After these modifications were complete, Breda set about another redesign of the aircraft, this time increasing the size of the ailerons and the chord of the upper wing and removing the outer panels of the lower wing permanently.

Thus modified, the original Tebaldi-Zari prototype was entered in the Italian 1923 fighter contest. The Regia Aeronautica (Italian Royal Air Force) took no interest in a production order, and no further aircraft were built.

Operators

 Kingdom of Italy

Specifications (with HS 42 engine)

Data from Green, William, and Gordon Swanborough The Complete Book of Fighters: An Illustrated Encyclopedia of Every Fighter Aircraft Built and Flown, New York: SMITHMARK Publishers, 1994, ISBN 0-8317-3939-8

General characteristics

  • Crew: 1
  • Length: 7.80 m (25 ft 7 in)
  • Wingspan: 9.00 m (29 ft 6⅓ in)
  • Height: 2.00 m (6 ft 6¾ in)
  • Wing area: 22.00 m2 (236.81 ft2)
  • Empty weight: 825 kg (1,819 lb)
  • Gross weight: 1,100 kg (2,425 lb)
  • Powerplant: 1 × Hispano-Suiza HS 42 eight-cylinder water-cooled piston, 224 kW (300 hp) each

    • Performance

  • Maximum speed: 255 km/h (158 mph)
  • Endurance: 3 hours

    • Armament

  • 2 × fixed forward-firing 7.7-millimeter (0.303-inch) machine guns

    • Notes:

  • Time to 5,000 m (16,404 ft): 16 min
  • Maximum speed figure is at 2,000 m (6,562 ft)

    • References

    Tebaldi-Zari Wikipedia
    (Text) CC BY-SA