Power type Steam Serial number 970-982, 1042-1068 Build date 1927-1928 | ||
 | ||
Designer South African Railways(Col F.R. Collins DSO) | ||
The South African Railways Class GCA 2-6-2+2-6-2 of 1927 was an articulated steam locomotive.
Contents
In 1927, the South African Railways placed thirteen Class GCA Garratt articulated steam locomotives with a 2-6-2+2-6-2 Double Prairie type wheel arrangement in branchline service. Another batch of twenty-six locomotives was acquired in 1928.
Manufacturer
The Class GCA 2-6-2+2-6-2 Double Prairie type Garratt steam locomotive was built to the specifications and design of Colonel F.R. Collins DSO, Chief Mechanical Engineer of the South African Railways (SAR), based on the design of the Class GC Garratt. Thirteen locomotives were ordered from Friedrich Krupp AG of Essen in Germany, who delivered them during October 1927, numbered in the range from 2190 to 2202.
A second order for another 26 locomotives was placed with the same manufacturer in 1928. These were numbered in the range from 2600 to 2625 when they were delivered during August in that same year.
Characteristics
The Class GCA had the same tractive effort and main dimensions as the Class GC, but was built on bar frames instead of plate frames. They also differed in general appearance by having round-topped fireboxes, compared to the Belpaire fireboxes of the Class GC, and with water tanks and built-up coal bunkers of a different shape. The second batch of locomotives differed slightly from the first, being 1 long ton 10 hundredweight (1,524 kilograms) heavier. Like the predecessor Class GC, they were all superheated and had Walschaerts valve gear.
The Class GCA proved to be good locomotives, although some trouble was experienced with coupling rods breaking, much of which was attributed to running them at excessive speed to maintain schedules, with their small coupled wheel diameter of only 42 3⁄4 inches (1,086 millimetres).
Experience showed that the performance of these locomotives could have been better if they had been fitted with somewhat larger cylinders, since their boilers still had an appreciable margin of capacity.
Service
The first batch of locomotives were placed in service on the Natal South Coast line, while the second batch were distributed wherever their services were required. These could be found working around Pietermaritzburg on the Donnybrook to Underberg and Greytown to Mount Alida branchlines, while some ended up at Nelspruit in the Eastern Transvaal Lowveld, for service on the Graskop branchline.
By 1973, the thirty-nine original members of the Class had dwindled to seven, all stationed at Mason's Mill in Pietermaritzburg, from where they still worked the light rail Underberg branch, often double-heading. By April of that year, however, the number had dropped to five. They were all withdrawn from service in October 1975. One of their last tasks was to work the track re-railing train which laid the heavier rails which enabled diesel-electric locomotives to finally replace them.
Knuckle couplers
In 1927, the SAR began to convert the couplers of its Cape Gauge rolling stock from the bell-shaped link-and-pin coupling system, which had been in use since the establishment of the Cape Government Railways in 1873, to AAR knuckle couplers. Judging from the official SAR Locomotive Diagram Book, the dimensional drawings as published by Holland, which were for the most part based on the original as-delivered and unmodified locomotives, as well as contemporary photographs, the Class GCA were acquired new with knuckle couplers fitted, as were the Classes 18, GF, HF and U, which also entered service in 1927.
Conversion of all rolling stock was to take several years and both coupler types could still be seen on rolling stock into the late 1950s. During the transition period, knuckle couplers on locomotives had a horizontal gap and a vertical hole in the knuckle itself to accommodate, respectively, a link and a pin, to enable it to couple to vehicles which were still equipped with the older link-and-pin couplers.