Suvarna Garge (Editor)

Oregon Route 200

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Existed:
  
2002 – present

Length
  
67.77 km

North end:
  
OR 99W in Monroe

Constructed
  
2002

Oregon Route 200

South end:
  
Lane–Douglas county line

Oregon Route 200 is an Oregon state highway running from OR 99W at Monroe to the Lane-Douglas County line near Anlauf. OR 200 is composed of most of the Territorial Highway No. 200 (see Oregon highways and routes). It is 40.64 miles (65.40 km) long, in two segments broken by a section of OR 36 and runs north–south.

Contents

Map of Territorial Hwy, Monroe, OR 97456, USA

OR 200 was established in 2002 as part of Oregon's project to assign route numbers to highways that previously were not assigned, and, as of June 2009, was unsigned.

Route description

OR 200 begins at an intersection with OR 99W in Monroe. It heads south through Bear Creek to an intersection with OR 36, at which point the Territorial Highway overlaps the Mapleton-Junction City Highway No. 229. The concurrency continues west for 1.48 miles (2.38 km) as OR 36, at which point OR 200 heads south through Elmira to Veneta. At Veneta, OR 200 crosses OR 126 and continues south through Crow and Lorane to the Lane-Douglas County line, where it ends. An old section of the Territorial Highway continues south as a Douglas County road to Anlauf, where it ends at an intersection with OR 99.

History

The Territorial Highway is one of Oregon's oldest roads. It can be traced to at least 1851, and by 1947 was referred to in a judicial opinion as the "Old Territorial Highway".

OR 200 was assigned to the remaining part of the Territorial Highway, except that section which is part of OR 36, in 2002.

References

Oregon Route 200 Wikipedia