Mill location TQ 451 291 Type Open Trestle post mill Windshaft Cast iron | Purpose Corn mill No. of sails Four | |
 | ||
Operator(s) Uckfield and District Preservation Society Year built Early nineteenth century Address High Weald AONB, Maresfield, Uckfield TN22 3HY, UK Similar Bragg's Mill - Ashdon, Caston Windmill, Thrigby Windmill, Starston Windpump, Chalton Windmill | ||
Nutley windmill
Nutley Windmill is a grade II* listed open trestle post mill at Nutley, East Sussex, England which has been restored to working order.
Contents
Dji phantom 4 nutley windmill ashdown forest
History
Nutley Windmill is thought to have been moved from Kilndown, Goudhurst, Kent circa 1817. The first record of a windmill at Nutley is in 1840. A timber in the mill has been dated by dendrochronology to 1738-70, and the main post is even older, dating to 1533-70. In 1870, the mill was painted white and working on four common sails. The mill was modernised in the 1880s, with the original wooden windshaft being replaced by a cast iron one, and spring sails replacing the commons. Larger millstones were added. The mill was tarred at about this point, as shown by a photo dated 1890. She worked by wind until 1908, although latterly in poor condition. In 1928, the owner of the mill, Lady Castle Stewart, had the mill shored up with brick piers and steel joists below the body. These allowed the mill to survive until she could be restored.
Restoration started in 1968, The mill turned by wind again in 1971, and ground grain again in 1972. In 1975, Nutley Windmill was given to the Uckfield and District Preservation Society by Lady Castle Stewart.
A stock broke in 1984, while filming was being done for the children's TV programme Chocky's Children for Thames Television. A new one was fitted a week later with aid from Thames. The mill was damaged in the Great Storm of 1987, with over £6,000 worth of damage incurred. New rear steps were fitted to the mill in 1994/5, the work funded by a grant from British Telecom. Repairs to the trestle and head wheel in 1998 allowed the head stones to be worked for the first time since the mill stopped work. New sails were fitted to the mill in 2008.
Description
Nutley Windmill is an open trestle post mill. She has two common sails and two spring sails carried on a cast iron windshaft and is winded by a tailpole. The mill drives two pairs of millstones, arranged head and tail. The wooden head wheel and tail wheel are 7 feet (2.13 m) diameter each. Both have been converted from compass arm to clasp arm construction. The body of the mill is 15 feet (4.57 m) long and 10 feet (3.05 m) wide.
Millers
References for above:-