NRHP Reference # 99001645 Architectural style International Style | Area 5,666 m² Nearest city Titusville | |
 | ||
Added to NRHP 000000002000-01-21-0000January 21, 2000 MPS John F. Kennedy Space Center MPS Similar Vehicle Assembly Building, Kennedy Space Center La, Space Flight Operation, Christopher C Kraft Jr Mission C, Kennedy Space Center | ||
Kennedy space center launch pad launch control center tours
The Launch Control Center (LCC) is a four-story building located at NASA's Kennedy Space Center on Merritt Island, Florida used for the supervision of launches from Launch Complex 39. In practice, this means that the LCC handles all American manned space flights. Attached to the southeast corner of the Vehicle Assembly Building, the LCC contains offices; telemetry, tracking and instrumentation equipment; the automated Launch Processing System; and four firing rooms.
Contents
- Kennedy space center launch pad launch control center tours
- Hd inside the nasa building vip tour kennedy space center florida usa
- Firing room
- Launch Director LD
- Flow Director FD
- NASA Test Director NTD
- Orbiter Test Conductor OTC
- Payload Test Conductor PTC
- Launch Processing System Coordinator LPS
- Superintendent of Range Operations SRO
- Ground Launch Sequencer Engineer CGLS
- References
Launches have been conducted from the LCC since the unmanned Apollo 4 (Apollo-Saturn 501) launch on November 9, 1967; its first manned launch was Apollo 8 on December 21, 1968.
Hd inside the nasa building vip tour kennedy space center florida usa
Firing room
Launch operations are supervised and controlled from the firing room. Responsibility for the booster and spacecraft remains with the LCC until the booster has cleared the launch tower, when responsibility is handed over to the Mission Control Center at Johnson Space Center.
Extensive renovation of Firing Room 4 was finished in 2006.
Launch Director (LD)
The Launch Director is the head of the launch team, and is responsible for making the final "go" or "no go" decision for launch after polling the relevant team members.
Flow Director (FD)
The Flow Director is responsible for the preparation of the spacecraft for launch, and remains in the LCC in an advisory capacity.
NASA Test Director (NTD)
The NASA Test Director is responsible for all pre-launch testing, whether involving the flight crew, the orbiter, the external tank/solid rocket booster, or ground support equipment. The NTD is also responsible for the safety of all personnel on the pad after fuelling has occurred. Reports to the Launch Director.
Orbiter Test Conductor (OTC)
The Orbiter Test Conductor is in charge of all pre-flight checkout and testing of the orbiter, and manages the engineers in the firing room who monitor the orbiter's systems. OTC is an employee of a contractor rather than of NASA.
Payload Test Conductor (PTC)
The Payload Test Conductor is responsible for the pre-flight test and checkout of payloads carried by the orbiter and manages the engineering and test teams responsible for monitoring and controlling payload ground operations. PTC is a contractor member of the Space Shuttle Team.
Launch Processing System Coordinator (LPS)
The LPS Coordinator monitors and oversees the LPS System; specifically, the desired launch rate, Space Shuttle stacking (assembly), and all safety requirements. This is made possible by the Launch Processing System, or LPS — a highly automated, computer-controlled system that oversees the entire checkout and launch process.
Superintendent of Range Operations (SRO)
The Superintendent of Range Operations ensures that all tracking and communications systems are ready to support the launch operation as well as ensuring that downrange airspace and splashdown areas remain clear for launch, and monitors weather near the launch site.
Ground Launch Sequencer Engineer (CGLS)
The Ground Launch Sequencer Engineer is responsible for monitoring the operation of the automated Ground Launch Sequencer system, which controls the countdown from T-9 minutes until launch. After this point through to T-31 seconds, they are in charge of implementing a manual hold if necessary. After T-31 seconds only an automatic cutoff is available. The automatic cutoff recycles the countdown clock to T-20 minutes. Usually this will extend the launch time beyond the launch window causing a scrub and a 24-hour turnaround.