Crosses Tuolumne River Named for James E. Roberts Height 70 m Material Concrete | Other name(s) Tuolumne River Bridge Opened 1971 Total length 427 m | |
Carries California State Highway 120 Locale Tuolumne County, California Design Richard "Dick" Dokken, PE Address CA-120, Jamestown, CA 95327, USA | ||
The James E. Roberts Memorial Bridge is a 1,400 foot two-lane highway bridge on California State Highway 120, in Tuolumne County, California. The bridge spans the Tuolumne River just north of Lake Don Pedro, near the community of Chinese Camp. It opened in 1971.
Contents
Originally named the Tuolumne River Bridge, it was renamed in 2007 in honor of James E. Roberts by legislative resolution. Roberts was the California Department of Highways (now, Caltrans) project manager, his first project management assignment as a senior bridge engineer. The cost to create new highway signs was raised by private donations.
Designers
Key members of the Tuolumne River Bridge project, in addition to Mr. Roberts, were Richard "Dick" Dokken, PE, as lead design engineer; M. Comacho, PE, as details and quantities engineer, George Amaro, PE, as specifications engineer; and R. J LeBeau, PE, and K. C. Blechinger, PE, as independent design checkers. Herbert K. Jensen, PE, was Resident Engineer for Bridge Construction, and John F. Harrington, PE, was assistant resident engineer.
This bridge, located north of Yosemite, was necessitated by a new highway alignment the resulted from creation of the new Don Pedro Dam reservoir. James Roberts laid out the bridge on a horizontal curve with a 1,200 foot radius curve to meet the requests of the highway engineers. Large bridges of this size were normally built straight, and California bridges required a detailed seismic analysis.
Normal weight concrete was used for foundations or bridge piers and lightweight concrete was used for the bridge deck. The superstructure was painted steel curved girders trucked into the site.
The bridge had to be completed prior to the filling of the reservoir. The tallest column is about 230 feet high, so falsework for concrete superstructure was not practicable. The highway engineers requested that the bridge have a capability to be widened from 2-lanes of traffic to 4-lanes, as planning at the time assumed that a wider highway would be necessary by 1995. The columns and foundation system were thus designed to support a second superstructure. However, as of 2016, the highway and bridge remain at two lanes width, as the majority of north-south freeway traffic in central California is on I-5 or State Highway 99 in the relatively flat Central Valley. The nearby Highway 49 is a winding, scenic highway that follows the contours of the foothills of the Sierra Nevada Mountain range.
The top 70 feet of the bridge columns have an equilateral triangular shape to support the four lanes of proposed superstructure. The initial 2-lanes were placed on the outside radius, so eccentric loading analysis of the columns was necessary. The foundation was excavated rock and is essentially hexagonal in shape to stabilize the column. The column is reasonably complicated and attractive.
Contractor
Peter Kiewit and Sons built the bridge as general contract with a gravel access road using switchbacks into the sides of the Tuolumne River canyon walls. Custom steel column forms were manufactured at an on site concrete batch plant. The San Jose Steel Company was the steel superstructure fabricator. Pieces were brought in by rail and truck. After column completion, steel girders were erected from the canyon floor, lifted from the cantilevered tips of the north and south girders.
The bridge opened to traffic in 1971. The designers received an AISC Medium Span Steel Bridge award in 1972 and a James F. Lincoln Arc Welding Foundation Award. The AISC jurors wrote "this gracefully sweeping bridge fits beautifully into its setting. The clean curving superstructure and the sculptured piers are very pleasing."