HoloVID is a tool originally developed for the holographic dimensional measurement of the internal isogrid structural webbing of the Delta family of launch vehicles in 1981 by Mark Slater.
Contents
History
Delta launch vehicles were produced by McDonnell Douglas Astronautics until the line was purchased by Boeing. Milled out of T6 Aluminum on 40-by-20-foot (12 by 6 m) horizontal mills, the inspection of the huge sheets took longer than the original manufacturing. It was estimated that a real time in situ inspection device could cut costs so an Independent Research and Development (IRAD) budget was generated to solve the problem. Two solutions were worked simultaneously by Mark Slater: a photo-optical technique utilizing a holographic lens and an ultrasonic technique utilizing configurable micro-transducer multiplexed arrays.
A pair of HoloVIDs for simultaneous frontside and backside weld feedback was later used at Martin Marietta to inspect the long weld seams which hold the External Tanks of the Space Shuttle together. By controlling the weld bead profile in real time as it was TIG generated, an optimum weight vs. performance ratio could be obtained, saving the rocket engines from having to waste thrust energy while guaranteeing the highest possible web strengths.
Usage
Many corporations (Kodak, Immunex, Boeing, Johnson & Johnson, The Aerospace Corporation, Silverline Helicopters, and others) use customized versions of the Six Dimensional Non-Contact Reader w/ Integrated Holographic Optical Processing for applications from supercomputer surface mount pad assessment to genetic biochemical assay analysis.
Specifications
HoloVID belongs to a class of sensor known as a structured-light 3D scanner device. The use of structured light to extract three-dimensional shape information is a well known technique. The use of single planes of light to measure the distance and orientation of objects has been reported several times.
The use of multiple planes and multiple points of light to measure shapes and construct volumetric estimates of objects has also been widely reported.
The use of segmented phase holograms to selectively deflect portions of an image wavefront is unusual. The holographic optical components used in this device split tessellated segments of a returning wave front in programmable bulk areas and shaped patches to achieve a unique capability, increasing both the size of an object which can be read and the z-axis depth per point which is measurable, while also increasing the simultaneous operations possible, which is a significant advance in the previous state of art.
Operational modes
A laser beam is made to impinge onto a target surface. The angle of the initially nonlinear optical field can be non-orthogonal to the surface. This light beam is then reflected by the surface in a wide conical spread function which is geometrically related to the incidence angle, light frequency, wavelength and relative surface roughness. A portion of this reflected light enters the optical system coaxially, where a 'stop' shadows the edges. In a single point reader, this edge is viewed along a radius by a photodiode array.
The output of this device is a boxcar output where the photodiodes are sequentially lit diode-by-diode as the object distance changes in relation to the sensor, until either no diodes are lit or all diodes are lit. The residual product charge dynamic value in each light diode cell is a function of the bias current, the dark current and the incident ionizing radiation (in this case, the returning laser light).
In the multipoint system, the HoloVID, the cursor point is acousto-optically scanned in the x-axis across a