Epiphone

History

Epiphone began in 1873, in Smyrna, Ottoman Empire (now İzmir, Turkey), where Greek founder Anastasios Stathopoulos made his own fiddles and lutes (oud, laouto). Stathopoulo moved to the United States in 1903 and continued to make his original instruments, as well as mandolins, from Long Island City in Queens, New York. Anastasios died in 1915, and his son, Epaminondas ("Epi"), took over. After two years, the company became known as The House Of Stathopoulo. Just after the end of World War I, the company started to make banjos. The company produced its recording line of banjos in 1924 and, four years later, took on the name of the Epiphone Banjo Company. It produced its first guitars in 1928. After Epi died in 1943, control of the company went to his brothers, Orphie and Frixo. In 1951, a four-month-long strike forced a relocation of Epiphone from New York City to Philadelphia. The company was acquired by its main rival, Gibson, in 1957.

Guitars

After Epiphone became a subsidiary of Gibson, many of its instruments were patterned after the more expensive Gibson versions. However, Epiphone also maintains its own line of archtop guitars.

As of January, 2013, Epiphone makes the following guitars:

Gibson Models

Original Epiphone models

Amplifiers

Epiphone began producing amplifiers in 1935 with the Electar Hawaiian Lap Steel Guitar Outfit. This outfit was an amplifier, case and lap steel guitar stand all rolled into one unit and was supplied by a suitcase manufacturer of the time.

Gibson produced Epiphone amplifiers in the 1960s. These were basically copies or variations of Gibson and Fender amplifiers. They used a tube design, and some had reverb and tremolo. Gibson decided to launch a new line of Epiphone amplifiers in 2005 with many different models, including the So Cal, Blues Custom, and the Epiphone Valve Junior. The Valve Hot Rod and Valve Senior were released in 2009. The Valve Hot Rod is a 5 watt amp like the Valve Junior, but has a gain and reverb control. The Valve Senior offers 20 watts of power, with a full equalizer, gain, volume, reverb, and presence control.

As of 2012, Epiphone has ceased production of their line of amplifiers with the exception of the Player and Performance Pack practice amplifiers, available only in Epiphone's starter packages. These Amplifiers are under the Epiphone Electar moniker.

USA

Epiphone instruments made between 1957 and 1970 were made in the Gibson factory at 225 Parsons St and on Elenor St; Kalamazoo, MI 49007. Only solid guitars with flat tops and backs were made at the Elenor Street plant (both Gibson and Epiphone) in Kalamazoo, Michigan. These Epiphone instruments were effectively identical to the relevant Gibson versions, made with same timber, materials and components, and by the same people as the contemporary equivalent Gibson guitars. They shared the Gibson serial-number sequence.

Some specific examples of Gibson-made Epiphone instruments from this period includes the Epiphone Sheraton (co-developed with the Gibson ES-335 & sharing its semi-hollow body, but with, Epiphone's pre-Gibson "Frequensator" tailpiece and "New York" mini-humbucker pick-ups, and significantly fancier inlays) and Sheraton II (replacing the Frequensator with Gibson's "stop-bar" tailpiece), the Epiphone Casino (similar to the Gibson ES-330), the Epiphone Cortez (similar to the Gibson B-25), the Epiphone Olympic Special (similar to the Gibson Melody Maker), the Epiphone Sorrento (similar to the Gibson ES-125TC, except for a few cosmetic changes), and the Epiphone Texan (similar to the Gibson J-45, apart from a change in scale-length). The other Kalamazoo-made Epiphones had technical or cosmetic relationship with the similar Gibson version.

Several Epiphone guitars have been produced in the United States after 1971. The Epiphone Spirit and Special were produced in the early 1980s in Kalamazoo. In 1993, three historic Epiphone acoustic guitars, the Texan, Frontier, and Excellente, were produced by Gibson Acoustic in Montana. The Paul McCartney Texan was produced in 2005, and in 2009, the Epiphone Historic Collection was created, beginning with the 1962 Wilshire, built by Gibson Custom. Several other models, such as the Sheraton and John Lennon Casinos, were built in Japan and assembled and finished by Gibson USA.

Japan

In the early 1970s, Matsumoku began to manufacture Epiphone instruments in Japan with the production and distribution being managed by Aria, in cooperation with Gibson. At this time, Epiphone ceased production of all of its traditional designs and began manufacturing markedly less expensive guitars, many of which had less traditional bolt-on style necks and unspecified wood types. Some of these guitars had similar body shapes to traditional Epiphone and Gibson designs but had different names while other models retained certain model designations, such as the FT (Flat Top) guitars. Construction of these guitars differed greatly from past Epiphone models. For the first several years of production in Japan, Epiphone guitars were actually rebranded designs already produced by the Matsumoku Company.

By 1975, the Japanese market started seeing some of the more familiar designs and names being reintroduced. These guitars were of higher quality than that of the previous years of production in Japan and included models such as the Wilshire, Emperor, Riviera and Newport bass. These models were available to the Japanese market only. By 1976 new designs of higher quality were being introduced for export but did not include the current Japanese market models. Notable new designs from this era were the Monticello (Scroll Guitar), the Presentation (PR) and Nova series flat tops and the Genesis solid body guitar. By 1980, most Japanese-only designs were available for worldwide distribution. The Matsumoku-made archtops, such as the Emperor, Riviera, Sheraton and Casino, were available into the mid-1980s.

Korea

From the 1980s, Epiphones were manufactured mainly in Korea and Japan by contractors licensed by Gibson. One of these contractors was Samick, which also built instruments under license for other brands and in its own name. The brand was primarily used to issue less expensive versions of classic Gibson models.

These guitars were constructed using different woods (usually Nyatoh, for example, instead of Mahogany), were fastened with epoxies rather than wood-glues. Gibson and Epiphone guitars all use Titebond resin glue, which is simple carpenters' wood glue, and were finished in hard, quick-to-apply polyester resin rather than the traditional nitro-cellulose lacquer used by Gibson Epiphone guitars assembled or made in the US use lacquer finishes, but those made outside of the US use a poly urethane finish because of pollution requirements. These particular budget considerations, along with others such as plastic nuts and cheaper hardware and pickups, allow for a more affordable instrument.

Samick has stopped manufacturing guitars in Korea.

China

In 2002, Gibson opened a factory in Qingdao, China, which manufactures Epiphone guitars. With few exceptions, Epiphones are now built only in the Qingdao factory.

Unique Epiphone models, including the Emperor, Zephyr, Riviera and Sheraton, are built to higher quality standards than the company's "Gibson copy" line. In 2004 Epiphone introduced a series of acoustic guitars named Masterbilt after a line of guitars of the 1930s. Today's Masterbilt guitars are manufactured in Qingdao, China.

Imperial Series and Elitist

During the early 1990s Epiphone released a series called the Imperial Series. These were remakes of the classic Epiphone archtops of the 1930s and '40s. Each instrument was handmade in the FujiGen factory in Japan. This short-lived series was discontinued in 1993, after only 42 Emperors were made. Several other models, including De Luxe, Broadway and Triumph models, were also produced in varying quantities.

Production was moved back to Nashville and Bozeman for a similar limited run of instruments (250 each of Sheratons, Rivieras, Frontiers, Excellentes and Texans). These guitars were the "Nashville USA Collection" (archtops) and the "Anniversary Series" (acoustics). Contrary to popular information, this line was related to, but not part of the 1994 Gibson Centennial Series commemorating 100 years of the Gibson Guitar Corporation. The Nashville and Anniversary Collections were intended as reintroductions of original, USA built Epiphone models.

In 2002, Epiphone began producing a range of higher quality instruments under the "Elitist Series" moniker which were built by Terada and FujiGen in Japan. As of 2008, all of the Elitist models have been discontinued with the exception of the Elitist Casino and the Dwight Trash Casino. The Epiphone Elitist guitars included features such as higher grade woods, bone nuts, hand-rubbed finishes, "Made in the USA" pickups and USA strings. Japanese domestic market Elitists used the Gibson Dove-wing headstock as opposed to the "tombstone" headstock used on exports.

Serial numbers and factory codes

Current Epiphone serial numbers give the following information:

Korea

China

Japan

Czech Republic

Indonesia

Example: SI09034853 SI = Samick Indonesia, 09 = 2009, 03 = March, 4853 = manufacturing number.

YYMMFF12345