Carries Road traffic Heritage status Grade II* listed Engineering design by Robert Reid Opened 1767 Body of water River Tweed Architect John Smeaton | Crosses River Tweed Material Sandstone blocks Construction started 1763 Owner Tweed Bridges Trust Engineer John Smeaton | |
 | ||
Locale Northumberland, England/
Scottish Borders, Scotland Similar Drygrange Old Bridge, Ladykirk and Norham, Mertoun Bridge, Kelso Bridge, Yair Bridge | ||
Coldstream Bridge, linking Coldstream, Scottish Borders with Cornhill-on-Tweed, Northumberland, is an 18th-century Grade II* listed bridge between England and Scotland, across the River Tweed. The bridge carries the A697 road across the Tweed.
Contents
History
The architect for the bridge was John Smeaton (responsible for the third Eddystone Lighthouse), working for the Tweed Bridges Trust. Construction lasted from 1763 to 1767, when it opened.
The cost of the bridge was £6,000, with government grants available for the project and the shortfall covered by a mixture of local subscription and loans from Edinburgh's banks, which were to be paid back by the tolling system. There was controversy when the project's resident engineer, Robert Reid of Haddington, used some of the funds to build accommodation for himself, but the trustees were assuaged when Smeaton argued that the house would actually help support the bridge. It seems that Smeaton was sympathetic to Reid, believing him to be underpaid for his work.
The bridge underwent subsequent work, including the 1784 construction of a downstream weir as an anti-erosion measure, concrete reinforcement of the foundations in 1922, alterations in 1928, and major work in 1960–1961 to strengthen the bridge and widen the road.
A plaque on the bridge commemorates the 1787 visit of the poet Robert Burns to the Coldstream. Of historical note is the toll house on the Scottish side of the bridge, which became infamous for the runaway marriages that took place there, as at Gretna Green, hence its name, the 'Wedding House' or 'Marriage House'. It ceased to be a toll bridge in 1826.
Listed building
The Coldstream Bridge 'that part in England' (Northumberland) was Grade II* listed in 1952, being described in the English Heritage listing as "an ambitious, well-proportioned, and carefully-detailed C18 bridge design."
The Coldstream Bridge '(that part in Scotland) over the Tweed' (Scottish Borders) was Category A listed in 1971, being described in the Historic Scotland listing as "A very fine example of an 18th century bridge design by pre-eminent civil engineer John Smeaton, his first example of a bridge executed in fine dressed sandstone with classical detailing and forming a prominent structure in the landscape of the border between Scotland and England."
Structure
The bridge is made of "squared and tooled sandstone blocks with ashlar dressings". A circular occulus in the spandrel above each pier is filled in with whinstone rubble. The five main arches each have an arch band and a triple keystone; the arches grow larger and higher towards the bridge's centre. There is a smaller semicircular flood arch at either end, with pendent keystones. A weir named the Cauld immediately downstream of the bridge has protected it from erosion since 1785.