Founded 1839 | ||
 | ||
The Birmingham and Derby Junction Railway was a British railway company. From Birmingham it connected at Derby with the North Midland Railway and the Midland Counties Railway at what became known as the Tri Junct Station. It now forms part of the main route between the West Country and the Northeast.
Contents
Origins
Although Birmingham was served by an extensive canal network, indeed, it is suggested they were a factor in its growth as an engineering centre, there were technical problems since Birmingham was on rising ground.
As early as 1824, Birmingham businessmen had been looking at the possibilities of the railway. The London and Birmingham Railway and the Grand Junction Railway had obtained their Acts of Parliament in 1833 and a scheme for a line to Gloucester and Bristol was in the air. The North Midland had been floated in 1833 and a proposal was made to connect to its terminus at Derby
George Stephenson surveyed the route in 1835. The bill envisaged the line as running through Whitacre to meet the London and Birmingham Railway with a junction at Stechford to travel into the latter's terminus at Curzon Street. It would also run from Whitacre to Hampton-in-Arden, where it would join the L&B for connections to London.
The promoters came into conflict with those of the Midland Counties Railway even before the bills were presented to Parliament since the lines would compete with each other. In the end, the Birmingham and Derby line agreed to withdraw their branch to Hampton if it the Midland Counties withdrew their line along the Erewash valley.
With the active support of the Prime Minister Robert Peel, the member for Tamworth, the Birmingham and Derby Junction Railway Bill passed through Parliament on 19 May 1836. The Hampton branch had been removed, but when the Midland Counties presented their bill, it still contained the Erewash line (although it was later dropped on the insistence of the North Midland Railway). The Birmingham and Derby people therefore presented a fresh bill in 1840 for the branch as a separate line which later became known as the Stonebridge Railway.
Construction
George's son Robert Stephenson took on the post of engineer, with an assistant, John Birkinshaw. Some 42 miles (68 km) long, it would need seventy eight bridges and two viaducts, with a cutting at the approach to Derby, consideration being given to the danger of flooding by the River Trent and there was no gradient steeper than 1 in 339.
The rails were single parallel form, 56 lb (25 kg). per yard, set in chairs upon cross sleepers. Although the standard gauge was used to match the other railways it was associated with, the rails were actually set at 4 ft 9 in (1.45 m) apart to allow extra play.
Competition
The B&DJR opened on 12 August 1839 with the line into Hampton, where the trains would reverse for Birmingham. There were six stations in addition to Hampton and Derby. These were Coleshill (later renamed Maxstoke), Kingsbury, Tamworth, Walton, Burton and Willington.
From the start the joint use of Curzon Street terminus, with the London and Birmingham, gave problems. In 1842 a new line was opened with a new terminus at Lawley Street. This proceeded to Whitacre via Castle Bromwich, Water Orton and Forge Mills (later remamed Coleshill). The line from Whitacre to Stechford which had not been built, was abandoned, and that to Hampton was reduced to single track.
Strong competition between the line and the Midland Counties Railway for transport, particularly of coal, to London, almost drove both of them out of business.
The B&DJR offered a time from Derby to London of around seven hours, but when the MCR began operating it was able to make the journey in an hour less. The B&DJR lowered its fares but this simply resulted in a price war. In a war of "dirty tricks", the MCR made an agreement with the North Midland for exclusive access to its passengers. In retaliation the Birmingham board opposed a bill that the MCR had submitted to Parliament. Both lines were in dire straits and paying minuscule dividends.
The North Midland was also suffering severe financial problems arising from the original cost of the line and its buildings. At length George Hudson took control of the NMR and adopted Robert Stephenson's suggestion that the best outcome would be for the three lines to merge.
Hudson foresaw that the directors of the MCR world resist the idea and made a secret agreement with the B&DJR for the NMR to take it over. This would of course take away the MCR's customers from Derby and the North and, when news leaked out, shares in the B&DJR rose dramatically.
Hudson was able to give the MCR directors an ultimatum, and persuaded the line's shareholders to override their board and the stage was set for amalgamation.
Midland Railway
In 1844, the Birmingham and Derby Junction Railway, the Midland Counties and the North Midland Railway merged to form the new Midland Railway.
The route to Hampton-in-Arden immediately lost all importance when the companies merged, since London traffic was redirected through the shorter Midland Counties route via Rugby. Known as the Stonebridge Railway, it became a minor branch line, and struggled on as such with only one daily passenger train until 1917, when this train was withdrawn as a wartime economy measure. The line remained open until 1935 for freight-only closing when one of the original timber bridges failed. The old Birmingham and Derby Junction station building at Hampton can still be seen.
The line into Lawley Street remained important, however, for passengers to the South West, who would join the Birmingham and Gloucester Railway at Camp Hill station or, from 1841, Curzon Street.
Present day
It is now part of the main line from the North West and Newcastle, via Derby and Birmingham New Street, to the south West at Bristol. CrossCountry is now the principal operator on the line.
See also Birmingham and Derby Junction Railway Locomotives