 | ||
The Wright R-975 Whirlwind was a series of nine-cylinder air-cooled radial aircraft engines built by the Wright Aeronautical division of Curtiss-Wright. These engines had a displacement of about 975 in³ (16.0 L) and power ratings of 300-450 hp (225-335 kW). They were the largest members of the Wright Whirlwind engine family to be produced commercially, and they were also the most numerous.
Contents
- Design and development
- Operational history
- Production by Continental Motors
- Other license built R 975s
- Variants
- Continental R 975
- Engines on display
- Specifications Whirlwind R 975E 3
- General characteristics
- Components
- Performance
- References
During World War II, Continental Motors built the R-975 under license as a powerplant for Allied tanks and other armored vehicles. Tens of thousands of engines were built for this purpose, dwarfing the R-975's usage in aircraft. After the war, Continental continued to produce its own versions of the R-975 into the 1950s; some of these produced as much as 550 hp (410 kW).
The R-975 is most famous for being used as the power plant for the M18 Hellcat tank destroyer, the fastest and most efficient American tank killer of World War II. The R-975 powered M18 remained the fastest tracked armored vehicle in the world until the introduction of the turbine powered M1 Abrams in the 1980s.
Design and development
Wright introduced the J-6 Whirlwind family in 1928 to replace the nine-cylinder R-790 series. The J-6 family included varieties with five, seven, and nine cylinders. The nine-cylinder version was originally known as the J-6 Whirlwind Nine, or J-6-9 for short. The U.S. government designated it as the R-975; Wright later adopted this and dropped the J-6 nomenclature.
Like all the members of the J-6 Whirlwind family, the R-975 had larger cylinders than the R-790. The piston stroke of 5.5 in (14.0 cm) was unchanged, but the cylinder bore was expanded to 5.0 in (12.7 cm) from the R-790's bore of 4.5 in (11.4 cm). While the R-790 was naturally aspirated, the R-975, like the other J-6 engines, had a gear-driven supercharger to boost its power output.
Wright gradually developed the R-975, at first using suffix letters to indicate successive versions. The original R-975 (or J-6-9) was rated for 300 hp (224 kW), while the R-975E of 1931 could do 330 hp (246 kW) thanks to an improved cylinder head design. Wright later added numeric suffixes to show different power levels. The R-975E-1, introduced the same year as the R-975E, was rated at 365 hp (272 kW) thanks to higher-compression pistons and a slightly greater RPM limit. An even more powerful version, the R-975E-3, was also introduced that year, with greater supercharging and a still higher RPM limit, and was progressively refined until the final model of 1935 could reach 450 hp (336 kW) for takeoff.
Operational history
As the most powerful Whirlwind engine to be commercially produced, the R-975 also became the most popular. It was a powerplant for a variety of civil utility aircraft, such as the Beechcraft Staggerwing, and was also used for some early airliners, like the Ford Trimotor 4-AT-E and the Lockheed Electra 10B. In addition, it powered several U.S. military training aircraft, the North American BT-9 and Vultee BT-15 Valiant for the Army and the Curtiss-Wright SNC-1 Falcon for the Navy. It was even used in a fighter aircraft, the Curtiss F9C Sparrowhawk parasite fighter used on U.S. Navy airships.
One notable record set by a Wright J-6 Whirlwind-powered aircraft occurred on July 28–30, 1931, when Russell Norton Boardman (age 33) and John Louis Polando (age 29) flew from Floyd Bennett Field, usually abbreviated as "FBF" — a famous New York City-area early airport on western Long Island from which many record flights originated — to Istanbul, Turkey aboard a Bellanca Special J-300 high-wing monoplane named Cape Cod, registration NR761W, making it safely to Istanbul nonstop in 49:20 hours, establishing a distance record of 5,011.8 miles (8,065.7 km), the first known nonstop record flight in aviation history whose distance surpassed either English (5,000 mi) or metric (8,000 km) mark. As the runway at FBF was just 5,000 feet (1,500 m) long, Boardman and Polando needed to have a fence removed and clear a parking lot to add another thousand feet to meet their required takeoff distance. The phone and electric utilities even took down poles along Flatbush Avenue.
However, the R-975 faced heavy competition from Pratt & Whitney's R-985 Wasp Junior and from their larger R-1340 Wasp. Pratt & Whitney sold many more Wasp Juniors for aircraft use than Wright sold R-975s.
Wright's production of the R-975 continued until 1945, with over 7000 engines being produced by the company.
Production by Continental Motors
In 1939 the U.S. Army, which had already been using Continental R-670 radial engines in its light tanks, chose Continental Motors to build the R-975 under license as the engine for its M2 medium tanks. Subsequently, the same engine was selected for the M3 Lee medium tank, the M4 Sherman medium tank, the Canadian Ram tank, the M7 Priest self-propelled gun, the M18 Hellcat tank destroyer, and other Allied armored vehicles based on these. Continental versions of the R-975 for armored vehicles included the R-975E-C2, the R-975-C1, and the R-975-C4. Continental built over 53,000 R-975 engines for armored vehicles, far more than were ever built by Wright.
When installed in a tank, the R-975 did not have the benefit of being cooled by an air slipstream or propeller blast, so a cooling fan was attached to the power shaft and surrounded by a shroud to provide the same effect.
After the war, Continental introduced its own R-975 version for aircraft, the R9-A. Though it was basically similar to other R-975 engines, and its compression ratio and supercharger gear ratio were unchanged from the R-975E-3, other improvements in the R9-A allowed it to achieve 525 hp (391 kW) for takeoff, surpassing any Wright version. A military version, the R-975-46, could reach 550 hp (410 kW), and was used in Piasecki's HUP Retriever and H-25 Army Mule helicopters. Continental's production of R-975 engines continued into the 1950s.
Other license-built R-975s
The engine was built in Spain as the Hispano-Suiza 9Q or Hispano-Wright 9Q without modification apart from the use of Hispano's patented nitriding finishing process and, on one version only, the 9Qdr, an epicyclic output speed reducer. The R-975 was also produced under licence by Fábrica Nacional de Motores in Brazil.
Variants
Continental R-975
Engines on display
Some museums which have R-975 engines on display:
Specifications (Whirlwind R-975E-3)
Data from FAA type certificate data sheet for the R-975E-3; dimensions from Curtiss-Wright (1983).