Girish Mahajan (Editor)

Volvo FM

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Production
  
1998–present

Related
  
FH

Class
  
Heavy truck

Volvo FM

Manufacturer
  
Volvo Trucks Corporation

Assembly
  
Gothenburg, Sweden Ghent, Belgium Brisbane, Australia Kaluga, Russia Durban, South Africa Bangalore, India Curitiba, Brazil Cairo, Egypt (Ghabbour Group)

Body style
  
COE Day cab Sleeper cab Globetrotter High cab

The Volvo FM is a heavy truck range produced by Swedish Volvo Truck Corporation. Introduced in 1998 as FM7, FM10 and FM12 production continues with the second generation of FM range. FM stands for Flat Medium height cab, where the numbers denominate an engine capacity in litres. As of 2005 the engine size is no longer added to the model denomination. The FM range is a multipurpose truck range for distribution, construction and on highway/off highway transport duties. In 2013, Volvo Trucks announced an updated, Euro VI version of the Volvo FM.

Contents

Introduction

The FM introduction continued to build on successful line of F7, FL7 and FL10 trucks and it was also a part of Volvo Trucks Corporation planning strategy for "The Global Family Of Trucks" where FM would be complementing FH and NH/VN truck range. Released in conjunction with face-lifted FH range the FM7,10,12 included Volvo electronic architecture and upgraded D12 engine whilst carrying over the older D7 and D10 engines which traced their origins to the early push-rods TD70 and TD100 power plants but with modern electronic controls implants to increase power outputs and improve fuel efficiency and emissions.

Design and technology

The FM range is closely related to the FH range where models share the numbers of components further decreasing production and development costs while improving built efficiency and quality of the products. In principle the FM and the FH and to a degree the NH cabs have a same layout with driver and passenger area, dashboard and seats as the common feature. The lower position of FM cabs is the primary difference between the FM and FH ranges

Cabs

What appeared to be scaled down FH cabs were initially available in three basic sizes, short day cab,sleeper cab, and globetrotter cab. Various trims and color option were available. Electric cab tilt was an option.

Electric and electronics

The electrical and electronic system shared with the FH series was based on electronic control units and data bus technology. The communication among the different control units run via two data links SAE J1939 and SAE J1708 allowed possibility of diagnostics, analysis and follow up of the vehicle's system via instrument cluster display.

Engines

Engines horsepower rating span from 250 hp (190 kW) to 420 hp (310 kW) in the initial release.

  • D7A -> 203
  • D7C -> 250-290 hp
  • D10B -> 320-360 hp
  • D12C -> 380-420 hp
  • D7C is a further development of D7 generation of engines however major difference between the latter is the increase of engine capacity from 6.7 litres to 7.3 litres thanks to increase in stroke and cylinder diameter. Engine management EDC also received the upgrade to bring it inline with the rest of the "family" and be TEA 98 compliant. Introduction of D12C engine had created all new beast in its class thanks to its extra power and powerful engine brake which were only available previously in the FH class saw operators with an option of smaller cab but still capable long haul unit particularly with globetrotter cab and indeed FM12 did steal some sales from its bigger brother the FH12.

    Driveline

    The FM7, FM10 and FM12 were available in variety of configurations with manual and automatic transmissions as 4x2 and 6x4 tractor and rigid, 8x2 and 8x4 rigid and 6x6 special construction models with hub reductions or single final drives.

    Second generation (2001–present)

    In 2001 FM series underwent major revision in conjunction with FH series. Among changes resulted were 7- and 10-litre engines being dropped and replaced by an all-new 9-litre D9A engine and introduction of a new automated gear-change transmission I-Shift and new passive safety feature FUPS Front Underrun Protection System, designed to prevent smaller vehicles from being "under run" or wedged under front of the truck in an event of frontal collision.

    Engine and transmission

    The new D9A engine developed on the basis of D12 with single overhead camshaft and four valves per cylinder and electronic unit injectors followed with a new design feature for Volvo, timing gears at the flywheel side (rear) of the engine, design which will later become standard across entire Volvo truck engine range. D9A power output varies from 300 - 380 hp (280 kW) and torque 1400 - 1700 Nm respectively. Introduction of I-Shift also spelled end for Geartronic (AGS) and its shortcomings however the I-Shift was designed to be what it is from ground up where Geartronic was an add on modification to existing manual transmission. In 2003 FM12 with 460 hp (340 kW) D12D was launched as well as new version of Powertronic automatic transmission. L

    2005 upgrade to present

    The evolution of Volvo FM series continued in 2005 with the release of a new generation of FM trucks powered by an all-new 13-litre D13A engine and improved 9-litre D9B unit and the second-generation I-Shift transmission. The naming of the series had also changed: engine size in litres is no longer used in the FM name. The new engines were available in Euro IV emissions standard in both Selective Catalytic Reduction. Volvo had also introduced on D13A engine with SCR an improved version of its engine compression brake the "VEB+" featuring additional helper rocker arm and fourth cam lobe per cylinder. Power outputs available from 360 hp (270 kW), 400 hp (300 kW), 440 hp (330 kW) and 480 hp (360 kW). In 2007 Volvo introduced D13B with Exhaust Gas Recirculation configuration and VGT turbocharger but without exhaust particle filter and is the only manufacturer to offer this solution thus far. The engines are available in slightly reduced power output ranging from 360 hp (270 kW), 400 hp (300 kW), 440 hp (330 kW) and 500 hp (370 kW) however 500 hp (370 kW) option is only available for FH series.

    Volvo Truck Corporation had announced a new version of an engine the D11B available in two power outputs 390 hp (290 kW) and 430 hp (320 kW) as well as new safety features such as Driver Alert Support monitor, Electronic Stability Program (ESP), Lane Changing Support, Cornering lights and Rain detection windscreen wipers.

    2010-present (refresh)

    In 2010, Volvo released the completely facelifted FM. The facelift which adds the new styling and added engines. It was the first time fitted with LED daytime running lights. Also, Volvo launched its related to the FM, the FMX.

    On March 19, 2013, Volvo revealed the updated FM, more thorough facelift. The new FM debuted at the 2013 Commercial Vehicle Show in the UK. It uses Volvo Dynamic Steering System, more LED daytime running lights, the new improved styling (borrow cues from the new FH), the new interior (including the refreshed dashboard and an infotainment system) and the introduced Euro VI standard. Sales of the new FM commenced in September 2013.

    Marketing

    In November 2013, Volvo released a viral advertisement on YouTube to promote the FM's dynamic steering system. In the video, Jean-Claude Van Damme performs his splits while standing on the side mirrors of two FMs running in reverse.

    References

    Volvo FM Wikipedia