Trisha Shetty (Editor)

Venera 16

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Mission type
  
Venus orbiter

SATCAT no.
  
14107

Inclination
  
92.5°

Launch mass
  
5,300 kg

Last contact
  
July 1984

COSPAR ID
  
1983-054A

Spacecraft type
  
4V-2

Period
  
24 hours

Launch date
  
7 June 1983

Launch site
  
Baikonur Cosmodrome

Venera 16 Spacecraft Venera 16 Pics about space

Operator
  
Soviet Academy of Sciences

Mission duration
  
Overall: 1 year, 1 monthAt Venus: 9 months

Similar
  
Venera 15, Venera 14, Venera 6, Venera 7, Venera 4

Venera 16 (Russian: Венера-16 meaning Venus 16) was a spacecraft sent to Venus by the Soviet Union. This unmanned orbiter was to map the surface of Venus using high resolution imaging systems. The spacecraft was identical to Venera 15 and based on modifications to the earlier Venera space probes.

Contents

Venera 16 Spacecraft Venera 16 Pics about space

Mission profile

Venera 16 httpsiytimgcomviNH1CXSGgueshqdefaultjpg

Venera 16 was launched on June 7, 1983 at 02:32:00 UTC and reached Venus' orbit on October 11, 1983.

Venera 16 NASA NSSDCA Spacecraft Details

The spacecraft was inserted into Venus orbit a day apart from Venera 15, with its orbital plane shifted by an angle of approximately 4° relative to one another probe. This made it possible to reimage an area if necessary. The spacecraft was in a nearly polar orbit with a periapsis ~1000 km, at 62°N latitude, and apoapsis ~65000 km, with an Inclination ~90°, the orbital period being ~24 hours.

Venera 16 Venera 1516 Radar Mosaic Browser

Together with Venera 15, the spacecraft imaged the area from the north pole down to about 30°N latitude (i.e. approx. 25% of Venus surface) over the 8 months of mapping operations.

Spacecraft structure

Venera 16 Venera 15 16 4V2 1 2 Gunter39s Space Page

The Venera 15 and 16 spacecraft were identical and were based on modifications to the orbiter portions of the Venera 9 and Venera 14 probes. Each spacecraft consisted of a 5 m long cylinder with a 0.6 m diameter, 1.4 m tall parabolic dish antenna for the synthetic aperture radar (SAR) at one end. A 1-meter diameter parabolic dish antenna for the radio altimeter was also located at this end. The electrical axis of the radio altimeter antenna was lined up with the axis of the cylinder. The electrical axis of the SAR deviated from the spacecraft axis by 10 degrees. During imaging, the radio altimeter would be lined up with the center of the planet (local vertical) and the SAR would be looking off to the side at 10 degrees. A bulge at the opposite end of the cylinder held fuel tanks and propulsion units. Two square solar arrays extended like wings from the sides of the cylinder. A 2.6 m radio dish antenna for communications was also attached to the side of the cylinder. The spacecraft each massed 4000 kg.

Venera 16 Spacecraft Venera 16 page 2 Pics about space

Both Venera 15 and 16 were equipped with a Synthetic Aperture Radar (SAR). A radar was necessary in this mission because nothing else would be able to penetrate the dense clouds of Venus. The probes were equipped with on board computers that saved the images until the entire image was complete.

List of spacecraft instruments and experiments:

  • Polyus-V Synthetic Aperture Radar
  • Omega Radar Altimeter
  • Infrared Fourier Spectrometer
  • Cosmic-Ray Detectors (6 sensors)
  • Solar-Plasma Detectors
  • References

    Venera 16 Wikipedia