Power type Steam Model NGR Mallet | Serial number 19577-19586 Build date 1912 | |
Designer North British Locomotive Company Builder North British Locomotive Company | ||
The South African Railways Class MC 2-6-6-0 of 1912 was a steam locomotive.
Contents
In 1912, the South African Railways placed ten Class MC Mallet articulated compound steam locomotives with a 2-6-6-0 wheel arrangement in service in Natal.
Manufacturer
To augment the Mallet locomotive fleet operating across the more difficult sections of the Natal mainline, the South African Railways (SAR) placed an order with the North British Locomotive Company for ten compound steam locomotives which were very similar to the Class MB. They were delivered and placed in service in May 1912, designated Class MC and numbered in the range from 1607 to 1616.
Compounding
In a compound locomotive, steam is expanded in phases. After being expanded in a high-pressure cylinder and having then lost pressure and given up part of its heat, it is exhausted into a larger-volume low-pressure cylinder for secondary expansion, after which it is exhausted through the smokebox.
In the compound Mallet locomotive, the rear set of coupled wheels are driven by the smaller high-pressure cylinders, which are fed steam from the steam dome. Their spent steam is then fed to the larger low-pressure cylinders, which drive the front set of coupled wheels. By comparison, in the more usual arrangement of simple expansion, steam is expanded just once in any one cylinder before being exhausted through the smokebox.
Characteristics
Like the previous Mallets, these ten compound locomotives had Walschaerts valve gear and used saturated steam. The high-pressure cylinders of the hind engine unit were equipped with piston valves while the low-pressure cylinders of the front engine unit were equipped with slide valves.
Their Type TM tenders were the same as those of the Classes 3 and 3B, with a coal capacity of 8 long tons 5 hundredweight (8.4 tonnes) and a water capacity of 4,000 imperial gallons (18,200 litres), but they differed little from the previous Mallets in size, power and performance and may for all intents and purposes also have been classified as Class MB. It would seem that, compared to the Cape Government Railways, which tended to group locomotives in the same Class which were dissimilar even to the extent of having different wheel arrangements, the early SAR at times took locomotive classification to the other extreme.
Unlike the Class MB, on which the sandboxes were placed on top of the boiler in accordance with American practice, the sandboxes of the Class MC were arranged on a different system, the advantages of which were questionable. The sandboxes for the hind engine unit were secured to the running board, just to the rear of the high-pressure cylinders, while those for the front engine unit were placed on the upper sides of the boiler, just to the rear of the smokebox.
Superheating
The Class MC were satisfactory locomotives, but, like the earlier Mallet compounds, they would have performed better if they had been superheated. Two of them, numbers 1612 and 1615, were later equipped with new boilers and superheaters and their coupled wheels were retyred to a diameter of 46 inches (1,168 millimetres). No others were modified in this manner.
Service
The Class MC joined the Class MA and MB fleet on the Natal mainline, working heavy coal trains between Estcourt and Highlands. In later years, some were transferred to the Cape Western System, where they served into the 1930s as banking locomotives up the Hex River Railpass between De Doorns and Touws River. Others were transferred to the Witwatersrand for general service and to haul coal on the Witbank line. They were withdrawn from service during 1933.