Tonnage 1,935 tons Length 285' 3" Draft 15’ | Tons burthen 2,580 tons Beam 48' | |
 | ||
Type AGS-26 (Silas Bent) class survey ship | ||
The Silas Bent class is frequently found applied to four ships though the Naval Vessel Register and some sources officially break them into the subclasses of AGS-26 and AGS-33. Silas Bent was the first of the first four purpose built ships for U.S. Navy surveys. Previous ships had been modifications of various naval types.
Contents
Bent (AGS-26) and Kane (AGS-27)
Two ships were built to essentially the same design at two different yards.
Wilkes (AGS-33) and Wyman (AGS-34)
The AGS-26 and AGS-33 (Wilkes) subclass ships were externally almost identical with slightly different modernized internal configuration reflecting their being laid down (July 1968) three years after Bent's delivery to the Navy 23 July 1965 (See photos at references). The two AGS-33 ships are USNS Wilkes (T-AGS-33) and USNS Wyman (T-AGS-34)
USNS Wilkes (AGS-33) and USNS Wyman (AGS-34) were laid down on the same day, 18 July 1968, at the same shipyard, Defoe Shipbuilding Co., Bay City, Michigan.
Configuration and Data Systems
The ships were designed to be capable of surveys supporting hydrographic and bathymetric charting and oceanographic requirements. They differed chiefly in installed equipment and systems, particularly data acquisition systems.
The initial Bent installation was a prototype "Shipboard Survey System" based on a standard Navy AN/UYK computer.
Later Bent was equipped with the Oceanographic Data Acquisition System (ODAS), operational 1971, as were the later oceanographic survey ships Kane and Wilkes. The Wyman replaced USNS Sgt. George D Keathley (T-AGS-35) for geophysical, particularly gravity, and bathymetric surveys.
Wyman was equipped first with the Hydrographic Data Acquisition System (HYDAS) that was replaced in the mid 1970s by a new narrow beam swath system with its own specialized data acquisition system. The swath array, replacing the single beam system, was the Bottom Topography Survey Subsystem (BOTOSS) and the processing system, replacing HYDAS, was the Bathymetric Survey System (BASS).