Seedwings Europe Kestrel

Design and development

The Kestrel was designed as an intermediate-level hang glider with an emphasis on a light empty weight, easy rigging and good performance. It is made from aluminum tubing, with the double-surface wing covered in Dacron sailcloth. The nose angle is 129° for all models.

The models are each DHV2 certified and are named for their rough wing area in square feet.

Variants

Kestrel 133

Small-sized model for lighter pilots. Its 9.95 m (32.6 ft) span wing is cable braced from a single kingpost. The wing area is 12.4 m² (133 sq ft). The pilot hook-in weight range is 60 to 80 kg (132 to 176 lb).

Kestrel 148

Mid-sized model for medium-weight pilots. Its 10.25 m (33.6 ft) span wing is cable braced from a single kingpost. The wing area is 13.8 m² (149 sq ft). The pilot hook-in weight range is 70 to 90 kg (154 to 198 lb).

Kestrel 158

Large-sized model for heavier pilots. Its 10.4 m (34.1 ft) span wing is cable braced from a single kingpost. The wing area is 14.6 m² (157 sq ft). The pilot hook-in weight range is 80 to 100 kg (176 to 220 lb).

Specifications (Kestrel 133)

Data from Bertrand

General characteristics

Crew: one

Wingspan: 9.95 m (32 ft 8 in)

Wing area: 12.4 m² (133 sq ft)