Pyramidal carbocation

History

Studying these cations was sparked by at the time amazing results in computational chemistry. While calculating the optimal geometry of the mono-cation which arises from the extraction of chloride from 3-chloor-tricyclo(2,1,0,0^2,5)pentane the three bridges were expected to orient in space with angles of roughly 120°. The calculations however showed the four sided pyramide to be the most stable configuration. At the top of this pyramid there resides a carbon atom, still connected to a hydrogen. The original expected structure turned out to be not even close to an energy minimum: it represented a maximum.

Figure 1: Several possibilities for (CH)₅ cation.

1a starting situation in the calculations: the chloride ion just left.1b the expected structure. Charge has been delocalized over three carbon atoms1c representation of the pyramidal ion.

Depending on the method used the ion 1c in figure 1 is an absolute or just a relative minimum.

Theoretical background

A complete theoretical discussion will use all orbitals of all contributing atoms. A first approximation might use a LCAO of the molecular orbitals in the polygon forming the base of the pyramid and the orbitals on the apical atom, the carbon atom at the top of the pyramid. This approximation will provide insight in the intrinsic stability of the structures.

Apical carbon atom

The apical carbon atom is connected to only one other substituent, so a sp-hybridisation is to be expected. The substituent will be oriented upward. Towards the basic polygon three orbitals are available:

The second sp-orbital. This orbital is relatively low in energy due to the contribution of the s-orbital. With respect to the nodal planes in the remaining p-orbitals the symmetry of this orbital can be written as S_xS_y, symmetric with respect to both planes. The orbital has a rather low energy, in terms of the Hückel method its value is not easy to estimate, although it will be lower than α, since the orbital will have considerable s-character.

Two p-orbitals. These orbitals have a higher energy content then the sp-orbital. In terms of the Huckel method the energy will be α. In symmetry terms, these orbitals are orthogonal, described as A_xS_y and S_xA_y

Base of the pyramid

The approximation for the base of the pyramid is a closed ring of carbon atoms, all of them sp² hybridised. The exact results depend on the ring size; overall conclusions can be formulated as:

The lowest molecular orbital has, watched from the apex of the pyramid, no nodal planes. Symmetry will be S_xS_y. In the Hückel method its energy is (α - 2β)

The next level of energy is occupied by two degenerated orbitals. In symmetry terms they are written as S_xA_y and A_xS_y. The energy depends on the size of the ring:

Depending on the size of the base, there will be other MOs, but they are irrelevant to the present discussion.

Interaction between apex and base

To obtain bonding interactions between atoms or parts of molecules, two conditions should be met:

The orbitals to combine should have the same symmetry.

A smaller difference in energy between the combining orbitals will produce a greater stabilizing effect.

The orbitals at the apical carbon and the basic polygon are able to combine with respect to their symmetries. The result will be a more stable configuration for the pyramids. In figure 2, the symmetry aspects are depicted.

The apical sp orbital combines with the lowest MO of the basic ring to a low bonding and a high anti-bonding orbital.

The two apical p orbitals combine with the second lowest energy levels in the basic ring. Two bonding and two anti-bonding orbitals result. Figure 3 is a graphical representation of the results.

Filling the atomic and molecular orbitals in pyramidal structures of different base size leads to the next table. Only bonding orbitals are accounted for.

In the case of the three-sided pyramid, clearly no ion results; a known neutral species arises: tetrahedrane. To this molecule this way of description is an alternative quantum mechanical description.

The other pyramidal structures will be charged in relation with their base size.

Monocation

Figure 4: A number of derivatives of triclo[3,1,0,0^2,4]pentane (TCP) leading to the same pyramidal cation. The carbon atom carrying the leaving group becomes basic, carbon at the anti position becomes apical.
The group "R" is either ¹H or ²H (D):

In 1972 Masamune describes the results of dissolving a number of precursors to 4d (figure 4) at - 70°C. in superacid (a mixture of SO₂ClF and FSO₃H. Based on both the ¹³C as well as the ¹H-NMR-spectrum the evidence is clear: in each case the same intermediary is formed. Also, when the super acidic medium is destroyed with either methanol or benzoic acid the same product is formed. (see: below).

Assignment in the hydrogen spectrum is partly on intensity (hydrogens at the basic ring) partly on the common experience hydrogen's at the outer side of a circular conjugated system have signals at higher ppm relative to TMS, while those positioned over the ring will have lower, even negative, signals relative to TMS.

Assignment in ¹³C-NMR follow the same considerations as for ¹H. Though in carbon NMR intensity is a bad guide to the number of atoms, in the basic ring the unsubstituted carbons are similar enough to use intensity as indication for their number. A powerful tool too is the multiplicity of the carbon signal due to coupling with the to carbon bonded hydrogens.

Masamune himself does not state anything about the nature of the intermediate ion. Nevertheless, based on rules formulated by Olah, he is able to rule out localized cations (like 1-butyl) or delocalized ones (like allyl). For those ions signals around 200 ppm are expected.

Reaction with methanol and benzoic acid

Figure 5: De reaction products of the dimethyl pyramidal cation with methanol and benzoic acid.
The "R"-group is either¹H or ²H (D):

As described above, independent from its synthetic route, pyramidal ion 5a reacts with methanol or benzoate giving rise to products governed by reagent and the reaction medium as is clear by the substitution patterns. In 1972 Masamune is unable to explain the different behavior of the intermediate. In terms of the HSAB-theory an explanation might be given.

In 1975 Masamune calculated in the non-substituted ion most of the charge at the hydrogen atoms. Replacing hydrogen for carbon, the central atom of the methyl group, a more electronegative substituent (2.5 versus 2.1 on the Pauling scale) will concentrate charge on the skeletal carbon. This charge concentration has several effects:

The reaction with benzoate is governed by π - π interactions. The degeneration in the basic MO-system will be lost. As the apical side is inaccessible benzoate will approach from the bottom side of the pyramid. The interaction between the two π-systems, both disturbed at one point, will force a specific orientation. The orientation in which the interaction between positive charge generated by the methyl group on the pyramid and the charge adjacent to the carboxyl group will direct the system to a reaction of the carboxyl group with carbon 2 or 4 of the pyramid base. When reaction with benzoate takes place at carbon 2 bridges will form between the apical carbon and atoms 1 and 3. A bond too will form between anti-carbon 4 and the apex. Reaction at carbon 4 will have a same effect, although the resulting molecule has a mirror relation with respect to the molecule that results from reaction at position 2.

The reaction with methanol is charge driven. In de basic system an identifiable center of positive charge is present at the carbon carrying the methyl group. Methanol with its hard base in oxygen, will react at the center of positivity. The methoxy group appears at carbon 1, forcing bridges to form between carbon 2 and 4 to the apex, as well as between the now anti-carbon 3.

Bishomomonocarbocation

In chemistry, the prefix "homo" denotes a homolog, a likewise compound containing one, or as in this case two, extra CH₂-groups. The common aspect of the bishomo ions is the possession of a 1,4-cyclohexadiene ring instead of a cyclobutadiene one.

The stability of this ions at first may seem strange as enlargement of the ring in general will diminish the bonding overlap between the orbitals at the center of the pyramidal structure. Here the sp² hybridization, and consequently the planarity of the atoms of and those directly bonded to the sp² centers, forces the tops of the p-orbitals of the basal carbons towards each other, thus creating a solid base for the apical carbon to sit on. Stiffening the configuration by a bridge between the homo-atoms, converting the base of the pyramid to a norbornadiene, creates an even more stable structure.

Dication

According to the results presented in Table 1 a five sided pyramidal carbocation will be divalent. This is confirmed by theoretical and practical work by Hogeveen. In contrast to the monocation, which is described with several patterns of substitution, the dication is mainly studied by its hexamethyl derivative. The synthesis starts at hexamethyl Dewar benzene (compound I in table 4) reacting with Cl₂ into 5,6-dichloro-1,2,3,4,5,6-hexamethylbicyclo[2,1,1]hex-2-ene (compound II in table 4). Dissolution of this compound in fluorosulfonic acid gives rise to the dication (structure III in table 4).

The presence of a pyramidal ion in the solution of fluorosulfonic acid is evidenced by the ¹H- and ¹³C-NMR-spectrum (Table 5).

The assignment of the signals is based on their intensities and multiplicities. The assignment of the pyramidal structure is based on the observed simplicity of the spectra: five equal C-CH₃ groups combined with one outstanding C-CH₃ group. The only way to construct a molecular entity from this data is a five sided pyramid. Rapid equilibriums between degenerated classical or non-classical carbocations are disgarded as the position of the signals does not match the expected values for those kind of structures.

Reactions of the dication

The reactions of the dication fall apart into three groups:

Thermal reactions The hexamethyl substituted dication is a stable structure up to 40°C. Above this temperature reaction occurs: a hydride-ion is taken up, followed by an irreversible rearrangement to a Meisenheimer complex which is stable in de fluorosulfonic acid medium (see figure 6 upper reaction).

Charged nucleophiles (hydride, methoxide, hydroxide) react reversible, leading to, independent of the nucleofile at hand, identical 2,4-substituted tricyclo[3,1,0,0^3,6]hexane derivatis, e.g.: with methoxide: 2,4-dimethoxy-tricyclo[3,1,0,0^3,6]hexane is formed (see figure 6 middle reaction path).

Uncharged nucleofiles (amines like triethylamine) act as a base, reversible extracting two hydrogens from the ion in effct producing a dimethylene derivative of van benzvalene (see figure 6 lower reaction).

Other substitution patterns at the dications

The product of the reaction of the dication with triethylamine offers a pathway to other substitution patterns then hexamethyl. One or both double bonds are oxidized to a keton. Then keton then is reacted with an organometallic compound producing an alkylated hydroxide. The compounds formed this way possess one or two other alkyl groups, depending on the number of oxidized double bonds. When the alcohols are dissolved in fluorosulfonic acid they again give rise to new pyramidal dications. Both non-methyl groups occupy basal positions. Each other position at the pyramidal skeleton still carries a methyl group. Table 6 summarizes these findings.

Up to this point the substitution pattern of the divalent pyramidal ion is of minor importance to its behavior. A clear difference arises when the thermal stability if the ions of type V (Table 6) is studied: at -40°C the apical ethyl substituted ion is stable for 48 hours whereas no trace of the apical iso-propyl ion is detectable anymore.

Tervalent and higher ions

At the time of the literature survey (end of 1978) there were no reports on tervalent or higher pyramidal cations.