Type Road Tourist routes Tourist Drive 359 | Former
route number State Route 86 Length 5 km | |
South end Wanneroo Road (State Route 60), Ashby North end Flynn Drive, Banksia Grove Major suburbs Sinagra, Tapping, Mariginiup, Carramar | ||
Pinjar Road is a major distributor road in the north-eastern suburbs of Perth, Western Australia, located within the City of Wanneroo.
Contents
- Map of Pinjar Rd Western Australia Australia
- 2005 Re alignment
- Division of Old Road
- Southern realignment
- Route description
- Major intersections
- Extension to Flynn Drive
- References
Map of Pinjar Rd, Western Australia, Australia
The road was formerly part of the now-decommissioned State Route 86, and one of Perth's major arterial roads, previously connecting with Old Yanchep Road in Pinjar. Due to the road's impact as a freight route on adjoining residential properties, it was extensively realigned in 2005, and ultimately downgraded in importance with the extension of Joondalup Drive and State Route 85 a year later.
2005 Re-alignment
In 2005, the relevant local government body responsible for the road, the City of Wanneroo, realised the importance of the road and the impact it has on the residents in the adjoining suburbs of Banksia Grove, Carramar, Mariginiup, Neerabup and Tapping due to increased traffic. Funding for the realignment was an issue as the responsibility of construction fell to the developers of the adjoining Carramar Golf Course Estate, Peet Limited, and the City's original plans did not call for construction of this road until at least 2008-2009.
In order to expedite construction and relieve traffic pressures, the city agreed to pre-fund construction of the realignment by Peet, enabling the road to be completed and opened midway through 2006. Prior to the opening of this realignment however, the extension of Joondalup Drive from Wanneroo Road to Neaves Road was also completed and opened to traffic. This in turn caused a large number of heavy westbound vehicles to deviate through local roads within Banksia Grove to connect with Joondalup Drive.
As a consequence of this, the City implemented an order to limit the types of vehicles allowed to pass through the suburb and imposed on-the-spot penalties of up to $5,000 for offenders. The need for this order was removed when the City subsequently closed the old alignment of Pinjar Road south of the Joondalup Drive/Neaves Road intersection, and north of the Yandella Promenade (formerly Clarkson Avenue)/Pinjar Road intersection.
Division of Old Road
After the opening of the new Pinjar Road alignment in 2005, the old Pinjar Road was closed and divided into four distinct parts, completely ending its use as an arterial and distributor road for traffic:
The new Pinjar Road follows the old Pinjar Road route from Wanneroo Road, up until Yandella Promenade, where it deviates from the original junction at Neaves Road, to a large roundabout at Joondalup Drive 2 km further south-west. The road now completely bypasses Banksia Grove and forms a suburb boundary between Banksia Grove and Tapping.
Southern realignment
An $8 million to ralign and reconstruct Pinjar Road between Wanneroo Road to Galileo Avenue was undertaken by the City of Wanneroo. The project began in April 2010, with part of the new road opened to traffic in December 2010. Works were scheduled to be completed by December 2011. The works included shifting the southern terminus with Wanneroo road north-east by approximately 260 metres (850 ft).
Click here to view a plan of the Pinjar Road Realignment and Reconstruction
Route description
The road travels generally north from Wanneroo Road, servicing the following suburbs:
Only the intersection with Wanneroo Road is controlled by Traffic lights. Traffic flow is maintained by the use of roundabouts and Give Way signs at junctions along the route.
Major intersections
Extension to Flynn Drive
Plans for the road call for its extension to Flynn Drive from its existing termination point at Joondalup Drive. A timetable for these works has not been formally announced.