Neha Patil (Editor)

Netherton Tunnel Branch Canal

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Status
  
Open

Tunnel clearance
  
16 feet (4.9 m)

Boat-passable
  
Yes

Opened
  
20 August 1858

Owner
  
Canal & River Trust

Constructed
  
1855–1858

Towpath
  
Yes (two)

Length
  
2,768 m

Width
  
8.23 m

Netherton Tunnel Branch Canal wwwbike99comimages2601jpg

Waterway
  
Birmingham Canal Navigations

Similar
  
Birmingham Canal Navigations, Dudley Canal, Titford Canal, Engine Arm, Cobb's Engine House

Netherton Tunnel Branch Canal, in the English West Midlands, is part of the Birmingham Canal Navigations, (BCN). It was constructed at a 453–foot elevation, the Wednesbury or Birmingham level; it has no locks. The total length of the branch canal is 2.4 miles (3.9 km) and the canal tunnel is 9,081 feet (2,768 m) long.

Contents

Netherton Tunnel was the last canal tunnel to be built in Britain during the Canal Age. The first sod was turned by the Lord Ward on 31 December 1855 and the canal opened on 20 August 1858, providing a waterway connection between the Black Country towns of Netherton and Tipton. It was built to relieve the bottleneck of the adjacent Dudley Tunnel which is very narrow, has alternating blocks of one-way working, and had waiting times of eight hours or more, and sometimes several days.

The Netherton tunnel was built with a width of 27 feet (8.2 m) to allow two-way working of narrowboats; and is brick lined throughout. It has towpaths running through it, one on each side, which enabled horse-drawn narrowboats to be pulled through it. Chainage (distance) markers are still visible on the Eastern wall. The tunnel was fitted, from the start, with gas lighting over the towpaths, though this was later converted to electricity and it is now unlit.

The air vents that run along the line of the tunnel and provide ventilation, and a shaft of light into the canal, are known by the locals as "pepper pots", because of their shape. They are brick-lined and the openings are covered by an iron frame or grill. The wide bore and good ventilation mean that boats using the tunnel today are allowed to use the power of their internal combustion engines, which is prohibited in the narrower Dudley Tunnel.

The tunnel cost £302,000 as opposed to the £238,000 estimate prior to construction. The main reason for the project being overbudget was the extra works necessitated by the condition of the ground through which the tunnel passes.

Repairs

In 1983, the British Waterways Board had 80 yards (73.2 m) of the brick invert replaced with concrete as a result of the invert rising sufficiently to impede navigation.

In 2011, significant cracks were found in part of the tunnel lining. Traffic through the tunnel was limited, as a result. Repair work began early in 2013.

Route

The canal runs south-west from the BCN New Main Line at Dudley Port Junction and under the Old Main Line at Tividale Aqueduct. The northern mouth of the tunnel is near Dudley Road West, close to Tipton's border with Oldbury. An air-vent stands in the middle of Aston Road; another stands between two houses in Regent Road, both in the Tividale Hall estate near Dudley. The southern mouth of the tunnel is in Warrens Hall Park on the border of Dudley and Rowley Regis - the Bumble Hole and Cobb's Engine House are nearby. The Bumble Hole is a landscaped man made lake on the site of a former clay pit. The Dudley No. 2 Canal and the Boshboil Canal Arm are joined at Windmill End Junction. The Boshboil Arm was once part of a loop of the original Dudley Canal which went around Bumble Hole. This loop ceased to be part of the main line when a more direct line was cut. The loop became severed into two arms as a result of subsidence. The northern arm is the Boshboil Arm the southern is the Bumble Hole Branch.

References

Netherton Tunnel Branch Canal Wikipedia