Primary inflows Basin countries United States Surface elevation 577 m Shore length 64 km Cities Atoka, Antlers | Primary outflows McGee Creek Surface area 3,810 km (1,470 sq mi) Area 3,810 km² Lake type Reservoir | |
Location Atoka County, Oklahoma,
United States Water volume 113,980 km (9.241×10 acre·ft) Similar McGee Creek Natural S, Clayton Lake State Park, Raymond Gary State Park, Boggy Depot State Park, Arcadia Lake | ||
McGee Creek Reservoir is a reservoir in Atoka County, Oklahoma. It impounds the waters of McGee Creek and several smaller streams, including Potapo, Panther, Little Bugaboo, Bear, Blue, Mill, and Crooked creeks, all of which are tributaries of Muddy Boggy River. According to the Bureau of Reclamation (BuRec), the reservoir was designed to extend 14 miles (23 km) up McGee Creek and 9 miles (14 km) up Potapo Creek when the water is at "conservation level.
Contents
- Map of McGee Creek Reservoir Oklahoma USA
- ReservoirEdit
- Dam and river outletEdit
- Municipal water outletEdit
- HistoryEdit
- References
Map of McGee Creek Reservoir, Oklahoma, USA
McGee Creek Lake is bordered by the McGee Creek Wildlife Management Area, the McGee Creek Natural State Scenic Recreation Area, and McGee Creek State Park. The combined effect of these protected lands is to afford the area the same rural and isolated nature it has always known.
ReservoirEdit
McGee Creek Lake is 17 miles (27 km) east of Atoka; 18 miles (29 km) west of Antlers and 3 miles (4.8 km) north of Farris, Oklahoma
The reservoir, which filled at the completion of the United States Bureau of Reclamation McGee Dam in 1987, consists of 3,810 acres (15.4 km2) surface area and 64 miles (103 km) of shoreline. Its pool elevation is 577 feet (176 m) above sea level and it holds 113,930 acre feet (140,530,000 m3). At flood stage its pool elevation is 595.5 feet (181.5 m) above sea level and its storage capacity rises to 199,270 acre feet (245,800,000 m3).
Dam and river outletEdit
The dam is an earth-filled structure that is 1,968.5 feet (600.0 m) long and 160.7 feet (49.0 m) high across McGee Creek. An earthen dike 4,800 feet (1,500 m) long and 59 feet (18 m) high, blocks several saddles on the west side of the reservoir rim. A riprap blanket prevents erosion of the upstream sides of both the dam and the dike. The river outlet works located on the east side of the dam release water to McGee Creek under extreme conditions. The works include an intake structure, three conduits (each about 15 feet (4.6 m) in diameter), a stilling basis, associated gates and controls. The discharge channel to McGee Creek can pass flows ranging from 6,500 cubic feet (180 m3) to 50,000 cubic feet (1,400 m3) per second.
Municipal water outletEdit
Water from the lake is routinely pumped to municipal consumers via pipeline. The river outlet works, located on the east side of the dam, handle this function. A separate intake leads to three conduits (each 15 feet (4.6 m) diameter), which terminate in a stilling basin, which has a single pipe leading to the three variable-capacity centrifugal discharge pumps. The pumps discharge into a surge tank at the Atoka Lake, 18 miles (29 km) away, via a concrete pipe that is 5 feet (1.5 m) diameter. Other pumps then transfer the water to Oklahoma City.
HistoryEdit
The McGee Creek Project and McGee Creek Authority were established in 1978 to develop and maintain the McGee Creek Reservoir to provide a municipal and industrial water supply for areas in central and southern Oklahoma, including Oklahoma City and Atoka County. Under the direct supervision of superintendent Glen Russell, the authority has operated and maintained the reservoir and associated facilities, including an attached water pipeline, a surge tank, a regulating tank, a maintenance complex, and land easements surrounding these facilities. The U.S. Department of Interior, Bureau of Reclamation owns the reservoir, but has granted McGee Creek Authority ownership title to the project office, aqueduct and appurtenances, and other operation and maintenance related facilities.