Higher classification Liriodendroidae
Symbol of Kentucky
Scientific name Liriodendron
|Lower classifications Tulip poplar, Liriodendron chinense|
plant a tulip poplar tree liriodendron tulipifera fast growing tree
- plant a tulip poplar tree liriodendron tulipifera fast growing tree
- Plant portrait yellow poplar liriodendron tulipifera
- Cultivation and use
- Species and cultivars
These trees are widely known by the common name tulip tree or tuliptree for their large flowers superficially resembling tulips. The Latin Liriodendron actually means "lily tree",. The tulip tree is sometimes referred to as "tulip poplar" or "yellow poplar", and the wood simply as "poplar", although Liriodendron is not closely related to the true poplars, but is more closely related to magnolia trees. The tree is also called canoewood, saddle-leaf tree, and white wood.
Two species of Liriodendron are known to exist. Liriodendron tulipifera is native to eastern North America, while Liriodendron chinense is native to China and Vietnam. Both species often grow to great size, sometimes exceeding 50 m (164 ft) in height. The American species is commonly used horticulturally, and hybrids have been produced between these two allopatrically distributed species.
Various extinct species of Liriodendron have been described from the fossil record.
Plant portrait yellow poplar liriodendron tulipifera
Liriodendron trees are easily recognized by their leaves, which are distinctive, having four lobes in most cases and a cross-cut notched or straight apex. Leaf size varies from 8–22 cm long and 6–25 cm wide. The tulip tree is often a large tree, 18–50 m high and 60–120 cm in diameter. The tulip tree grows to a height of 70–190' and a spread of around 40' at maturity. Its trunk is usually columnar, with a long, branch-free bole forming a compact, rather than open, conical crown of slender branches. It has deep roots that spread widely.
Leaves are slightly larger in L. chinense, compared to L. tulipifera, but with considerable overlap between the species; the petiole is 4–18 cm long. Leaves on young trees tend to be more deeply lobed and larger in size than those on mature trees. In autumn, the leaves turn yellow, or brown and yellow. Both species grow rapidly in rich, moist soils of temperate climates. They hybridize easily, and the progeny often grow faster than either parent].
Flowers are 3–10 cm in diameter and have nine tepals — three green outer sepals and six inner petals which are yellow-green with an orange flare at the base. They start forming after around 15 years and are superficially similar to a tulip in shape, hence the tree's name. Flowers of L. tulipifera have a faint cucumber odor. The stamens and pistils are arranged spirally around a central spike or gynaecium; the stamens fall off, and the pistils become the samaras. The fruit is a cone-like aggregate of samaras 4–9 cm long, each of which has a roughly tetrahedral seed with one edge attached to the central conical spike and the other edge attached to the wing.
Liriodendron trees are also easily recognized by their general shape, with the higher branches sweeping together in one direction, and they are also recognizable by their height, as the taller ones usually protrude above the canopy of oaks, maples, and other trees—more markedly with the American species. Appalachian cove forests often contain several tulip trees of height and girth not seen in other species of eastern hardwoods.
In the Appalachian cove forests, trees 150 to 165 ft in height are common, and trees from 166 to nearly 180 ft are also found. More Liriodendron over 170 ft in height have been measured by the Eastern Native Tree Society than for any other eastern species. The current tallest tulip tree on record has reached 191.9 ft, the tallest native angiosperm tree known in North America. The tulip tree is rivaled in eastern forests only by white pine, loblolly pine, and eastern hemlock. Reports of tulip trees over 200 ft have been made, but none of the measurements has been confirmed by the Eastern Native Tree Society. Most reflect measurement errors attributable to not accurately locating the highest crown point relative to the base of the tree—a common error made by the users employing only clinometers/hypsometers when measuring height.
Maximum circumferences for the species are between 24 and 30 ft at breast height, although a few historical specimens may have been slightly larger. The Great Smoky Mountains National Park has the greatest population of tulip trees 20 ft and over in circumference. The largest-volume tulip tree known anywhere is the Sag Branch Giant, which has a trunk and limb volume approaching 4,000 cu ft (110 m3).
Liriodendrons have been reported as fossils from the late Cretaceous and early Tertiary of North America and central Asia. They are known widely as Tertiary-age fossils in Europe and well outside their present range in Asia and North America, showing a once-circumpolar northern distribution. Like many "Arcto-Tertiary" genera, Liriodendron apparently became extinct in Europe due to large-scale glaciation and aridity of climate during glacial phases. (The name should not be confused with Lepidodendron, an important group of long-extinct pteridophytes in the phylum Lycopodiophyta common as Paleozoic coal-age fossils).
Cultivation and use
Liriodendron trees prefer a temperate climate, sun or part shade, and deep, fertile, well-drained and slightly acidic soil. Propagation is by seed or grafting. Plants grown from seed may take more than eight years to flower. Grafted plants flower depending on the age of the scion plant.
The wood of the North American species (called poplar or tulipwood) is fine grained and stable. It is easy to work and commonly used for cabinet and furniture framing, i.e. internal structural members and subsurfaces for veneering. Additionally, much inexpensive furniture, described for sales purposes simply as "hardwood", is in fact primarily stained poplar. In the literature of American furniture manufacturers from the first half of the 20th century, it is often referred to as "gum wood". The wood is only moderately rot-resistant and is not commonly used in shipbuilding, but has found some recent use in light-craft construction. The wood is readily available, and when air dried, has a density around 24 lb/cu ft (0.38 g/cm3).
The name canoewood probably refers to the tree's use for construction of dugout canoes by eastern Native Americans, for which its fine grain and large trunk size is eminently suited.