Country United States Status Operational Commission date December 20, 1986 Opened 20 December 1986 | Construction began 1974–1986 Operator(s) PSEG Phone +1 800-436-7734 | |
 | ||
Address Hancocks Bridge, NJ 08038, USA Similar Duane Arnold Energy C, Calvert Cliffs Nuclear P, Susquehanna Steam Electric St, Prairie Island Nuclear P, Catawba Nuclear Station | ||
Pseg power s hope creek nuclear generating station
Hope Creek Nuclear Generating Station is a thermal nuclear power plant located in Lower Alloways Creek Township, in Salem County, New Jersey, United States, on the same site as the two-unit Salem Nuclear Power Plant. The plant is owned and operated by PSEG Nuclear LLC. It has one unit (one reactor), a boiling water reactor (BWR) manufactured by GE. The complex was designed for two units, but the second unit was cancelled in 1981. It has a generating capacity of 1,268 MWe. The plant came online on July 25, 1986, licensed to operate until 2026. In 2009, PSEG applied for a 20-year license renewal, which it received in 2011. With its combined output of 3,572 megawatts, the Salem-Hope Creek complex is the largest nuclear generating facility in the Eastern United States and the second largest nationwide.
Contents
- Pseg power s hope creek nuclear generating station
- Plant Features
- Surrounding population
- Seismic risk
- References
Hope Creek is one of four licensed nuclear power reactors in New Jersey. The others are the two units at the adjacent Salem plant, and the one unit at Oyster Creek Nuclear Generating Station. As of January 1, 2005, New Jersey ranked 10th among the 31 states with nuclear capacity for total MWe generated. In 2003, nuclear electricity generated over one half of the electricity in the state.
Plant Features
Hope Creek is a boiling water reactor (BWR) unlike its neighbors at the nearby Salem Nuclear Plant which are pressurized water reactors (PWR.)
Hope Creek's reactor is used to produce cobalt-60 by replacing a few fuel pins with cobalt-59-enriched steel.
The plant's huge natural-draft cooling tower can be seen from many miles away including from the Delaware Memorial Bridge, as well as from the observation deck on the 57th floor of One Liberty Place in Philadelphia on clear days. This cooling tower serves only Hope Creek's single reactor. The neighboring Salem units utilize once-through cooling with no cooling tower.
A unique feature of Hope Creek is its cylindrical reactor building complete with a dome which makes it appear similar to a pressurized water reactor containment building which is not typical of boiling water reactors. However this similarity is limited to appearance. Like other BWRs, the actual containment vessel for the reactor is a separate drywell/torus structure enclosed within the reactor building, but structurally separate. The outer reactor building serves as secondary containment and houses many of the reactor's safety systems.
Surrounding population
The Nuclear Regulatory Commission defines two emergency planning zones around nuclear power plants: a plume exposure pathway zone with a radius of 10 miles (16 km), concerned primarily with exposure to, and inhalation of, airborne radioactive contamination, and an ingestion pathway zone of about 50 miles (80 km), concerned primarily with ingestion of food and liquid contaminated by radioactivity.
The 2010 U.S. population within 10 miles (16 km) of Hope Creek was 53,811, an increase of 53.3 percent in a decade, according to an analysis of U.S. Census data for msnbc.com. The 2010 U.S. population within 50 miles (80 km) was 5,523,010, an increase of 7.5 percent since 2000. Cities within 50 miles include Philadelphia (43 miles to city center).
Seismic risk
The Nuclear Regulatory Commission's estimate of the risk each year of an earthquake intense enough to cause core damage to the reactor at Hope Creek was 1 in 357,143, according to an NRC study published in August 2010.