Time 23:03 (CEST) Cause Under investigation Date 5 June 2016 Trains 2 | Passengers 40 Total number of deaths 3 Passenger count 40 | |
 | ||
Operator National Railway Company of Belgium Similar Andria–Corato train collision, Bad Aibling rail accident, Pukhrayan train derailment | ||
The Hermalle-sous-Huy train collision was a collision between a passenger train and a freight train in Hermalle-sous-Huy, Belgium, on 5 June 2016. At least three people were killed and 36 others were injured.
Contents
The crash
The crash occurred at 23:03 CEST (21:03 UTC), when the passenger train crashed into the rear of the goods train while the two trains were on the same line. Three people were killed and nine more people were seriously injured. Twenty-seven others were treated for wounds at the scene. The driver of the passenger train was one of the victims. All on board had been rescued from the train by 02:00 on 6 June. Those less seriously injured were taken to Flône Abbey, or a nearby sports centre. The passenger train comprised two SNCB Class AM96 electric multiple units. It was travelling from Mouscron to Liers via Namur and Liège. The freight train had about 30 wagons in its consist.
The front two carriages were severely damaged. Unit 461 was at the rear of the train. It had about 40 passengers on board. The passenger train was travelling at about 90 kilometres per hour (56 mph) when it ran into the rear of the freight train, which was either stationary, or travelling at 10 to 15 kilometres per hour (6 to 9 mph). It was reported that an earlier lightning strike had caused disruption on the Liège–Namur railway line. A signal fault had been reported at 21:30, but was said to have been cleared at the time of the accident. Belgian Prime Minister Charles Michel tweeted his condolences to the victims and wished the injured a speedy recovery. He and King Philippe visited the site of the accident on 6 June.
Following the accident, it was revealed that the line was not equipped with the TBL 1+ signalling system, which is capable of automatic brake application if a train passes a red signal. This system was introduced following the Buizingen train crash in 2011.
The train event recorders of the passenger train were recovered from the wreckage on 8 June in an apparently undamaged condition. Infrabel stated that repairs to the tracks to allow single-line working for intercity trains would be completed by 8 June, with local trains being replaced by buses. It was intended that all track repairs would be completed by the evening of 9 June, which was achieved. Normal service resumed that day. Damage to the track required the repacement of 15 metres (16 yd) of rail and 50 metres (55 yd) of sleepers.
Investigation
The Railway Accident and Incident Investigation Unit of the Federal Public Service Mobility and Transport opened an investigation into the accident.
The train event recorder revealed that the driver of the train passed a signal displaying a double yellow (caution) aspect. However, he only started to brake when the freight train came in sight. The investigation is ongoing.