HMS Lightning (1895)

Design and construction

Three torpedo-boat destroyers were ordered on 7 November 1893 from the Jarrow shipbuilders, Palmers Shipbuilding and Iron Company for the Royal Navy as part of the 1893–1894 Naval Estimates. These three ships, Janus, Lightning and Porcupine were part of a larger group of 36 destroyers ordered as part of this shipbuilding programme, as a follow-on to the six prototype "26-knotters" ordered in the previous 1892–1893 Estimates. The Admiralty laid down broad requirements for the destroyers, including a speed of 27 knots (50 km/h; 31 mph) on sea trials, with the detailed design left to the builders, resulting in each of the builders producing different designs.

Palmers' design was 204 feet 6 inches (62.33 m) long overall and 200 feet (60.96 m) between perpendiculars, with a beam of 19 feet 9 inches (6.02 m) and a draught of 8 feet 0 inches (2.44 m). Displacement was 275 long tons (279 t) light and 320 long tons (330 t) full load. Four Reed water tube boilers fed steam at 250 pounds per square inch (1,700 kPa) to two triple expansion steam engines rated at 3,900 indicated horsepower (2,900 kW) and driving two propeller shafts. Three funnels were fitted. Armament consisted of a single QF 12 pounder 12 cwt gun and three 6-pounder guns, with two 18-inch (457 mm) torpedo tubes. One of the torpedo tubes could be removed to accommodate a further two six-pounders, although the Palmer 27-knotters later carried both the two torpedo tubes and all 5 six-pounder guns.

Lightning, together with the other two Palmer-built destroyers, was laid down on 28 March 1894, and was launched on 10 April 1895. Lightning exceeded the required 27 knots, reaching an average of 27.94 knots (51.74 km/h; 32.15 mph) during sea trials. Lightning completed in January 1896.

Service

The Palmer-built ships were considered the best of the 27-knotters, and at one stage, both Lightning and Janus were selected for service in distant overseas stations, although in the end, only Janus was sent to the China station, with Lightning serving her whole career in home waters.

Lightning took part in the 1896 British Naval Manoeuvres, attached to the Channel Fleet operation from Berehaven in southern Ireland. She was based at HMNB Portsmouth as a tender to Excellent in 1900. She underwent repairs to re-tube her boilers in 1902, and was commissioned by Lieutenant Rowland Henry Bather on 1 August 1902. She again had her boilers retubed at Sheerness in 1907, after which she returned to Portsmouth. On 17 February 1908 Lightning rammed a mooring bouy in Portsmouth harbour, holing her bow.

In 1910, Lightning was part of the Sixth Destroyer Flotilla, based at The Nore, still being based at the Nore in 1912. On 30 August 1912 the Admiralty directed all destroyers were to be grouped into classes designated by letters based on contract speed and appearance. After 30 September 1913, as a 27-knotter, Lightning was assigned to the A class.

Lightning, assigned the pennant number N.23, was allocated to the Nore Local Defence Flotilla by January 1915. On 30 June 1915, following the sighting of floating mines near the Kentish Knock Lightvessel, Lightning and the destroyer Vulture were sent out to deal with the mines. The two ships had destroyed three mines before Lightning struck another mine, lain by the German submarine UC-1, killing 15 of her crew. Lightning broke in half, the bow section sinking, while the stern was towed back to Sheerness and later scrapped. The ship's captain was absolved of any blame but was advised that he "might have considered he was in a mine field having already sighted three mines".