Manufacturer Hyundai Rotem Constructed 2010-11 Number built 1 | Family name Hanvit Entered service 2011 Number in service 0 | |
 | ||
HEMU-430X (standing for High-Speed Electric Multiple Unit 430 km/h eXperimental) is a South Korean high-speed train intended for a maximum speed of 430 km/h (267 mph). On the last day of March 2013, it achieved 421.4 km/h in a test run, making South Korea the world's fourth country after France, Japan and China to develop a high-speed train running on conventional rail above 420 km/h. The main new feature of the train compared to older South Korean high-speed trains is distributed traction. The foreseen commercial version of the train, tentatively named KTX-III, would enter regular service in 2015 with a top speed of 370 km/h (230 mph).
Contents
History
The original 1991 plan for the Korea Train Express (KTX) high-speed rail system foresaw an operating speed of 350 km/h (217 mph) to enable a travel time under two hours between Seoul in the northwest and Busan in the southeast of South Korea, the terminuses of the first line. Later, planned top speed was reduced to the 300 km/h (186 mph) maximum of existing high-speed trains on the market. Korail then ordered high-speed trains on the basis of Alstom's TGV Réseau, the KTX-I, which started KTX service on April 1, 2004, and operate at a top speed increased slightly to 305 km/h (190 mph) in November 2007.
In a project South Korean government research institutes and rail industry companies launched in 1996 to fully localise high-speed rail technology, the know-how gained in the technology transfer for the KTX-I was used as the basis to develop the experimental train HSR-350x, which was to be tested at up to 385 km/h (239 mph) so that the commercial version can have a top speed of 350 km/h (217 mph). However, the maximum speed achieved in the HSR-350x tests was 352.4 km/h (219.0 mph) on December 16, 2004; and the design and top speeds of the commercial version, the KTX-II (KTX-Sancheon) were set to be the same as those for the KTX-I.
The aim to develop commercial trains with a top speed of 350 km/h (217 mph) was taken up again in the project to build another experimental train, the HEMU-400X (High-speed Electric Multiple Unit - 400 km/h eXperiment), which was launched in July 2007. The six-year project schedule was originally set to last until July 2013, and involved 100,000 km (62,000 mi) of test runs with speeds reaching 400 km/h (249 mph). The project is led by the Korean Railroad Research Institute (KRRI) and Hyundai Rotem, and also involves the Korea Institute of Construction & Transportation Evaluation and Planning (KICTEP), 20 other companies, 13 universities, and one other organisation. The project budget was set at 97.11 billion won, with a government contribution of 69.2 billion won.
Following a call by Nam-Hee Chae, the president of the Korea Railroad Research Institute, for proposals for a generic name for Korean-made high-speed trains, on April 5, 2007, Chae announced the name Hanvit (Hangul: 한빛), which means a streak of intense light in Korean. Under the new naming scheme, HEMU-400X is also called Hanvit 400.
The preliminary design was presented to the public in May 2009. A full-scale mock-up of an end car was first shown in June 2009 at the RailLog 2009 exhibition in Busan. Detailed designs were presented in October 2010, when the prototype was expected to be completed in 2011 and start line tests in 2012.
HEMU-430X prototype
A prototype, named HEMU-430X was unveiled in May 2012. The unit is expected to undergo around 100,000 km of testing up to 2015.
Technical details
In contrast to the articulated passenger coaches between traction heads configuration of the KTX-I, HSR-350x and KTX-II trains, the 6-car HEMU-400X is fitted with distributed traction: traction equipment is underfloor and all axles of all four intermediate cars are powered. The detailed plans released in October 2010 changed the trailing end driving trailer of the experimental train into a powered car, deviating from the planned commercial version. The new high-power configuration is to provide for higher acceleration: the 8-car commercial configuration was calculated to reach 300 km/h (186 mph) in less than four minutes and less than 12 kilometres (7.5 mi); the top test speed of 400 km/h (249 mph) is to be reached in 673 seconds and 56.98 kilometres (35.41 mi). Similarly to JR East's Fastech 360 programme, the plan is to develop and test both asynchronous induction motors and permanent magnet synchronous motors in the train.
Research in the G7 programme showed that the bulk of the longitudinal aerodynamic resistance (drag) of the pantograph and the largest component of vertical aerodynamic forces (lift) acting on it derive from the contact shoe. For the HEMU-400X, researchers developed an aerodynamically optimised contact shoe cross section that reduced drag by about 40% and lift amplitude by about 25% in comparison to the contact shoe of the KTX-II pantographs.
The train is designed with active suspension for increased ride comfort. To save weight, in addition to aluminum, composite materials are to be used in the carbody. The development of new transformers, batteries and a number of other electric system components also focuses on reducing weight and size. The train is also intended as basis for Rotem to compete in high-speed train tenders abroad, and is designed to conform with European high-speed rail standards.
Nose styling was designed using a genetic algorithm, starting with the hybridization of the nose shapes of existing French TGV and German ICE high-speed trains. A double-deck configuration was also considered.
In the experimental train, the first two cars will test first class seating, the fourth car will be fitted out with a bar and special passenger compartments, the fifth car will test standard class seating. Data acquisition equipment for the on-board measurements are foreseen in the third and sixth cars.
Commercial version (KTX-III)
KTX-III, the commercial derivative of HEMU-400X, was expected to enter service in 2015. In normal 8-car, 197.6 m (648 ft) configuration, KTX-III would consist of two driving trailers at either end and six motorized intermediate cars giving 9.84 MW of power, with an option of extension to 10 cars. The second, fourth and seventh cars will house transformers, each connected to inverter groups on the neighbouring third, fifth, respective sixth car. The end cars will house the batteries, while pantographs will be installed on the extreme intermediate cars.
The goal for maximum operating speed was originally 350 km/h (217 mph), which was expected to enable Seoul-Busan travel times of 1 hour 50 minutes. In plans released on October 2010, planned service speed was raised to 370 km/h (230 mph). In the default configuration, the first two cars will be first class with 2+1 seating, the third car will house a bar and special passenger compartments with facing pairs of 3 or 2 seats, the fourth to eighth cars will be standard class with "3" seating, with foldable seats offering altogether 378 seats.