EEStor

Claimed specifications

The claims are described in detail in two of the company's patents, US 7033406  and US 7466536 .

The following is how the EESU is claimed to compare to electrochemical batteries used for electric cars:

Status and delays

Several delays in production have occurred and there has not been a public demonstration of the uniquely high energy density claims of the inventors. This has led to the speculation that the claims are false. In January 2007 EEStor stated in a press release "EEStor, Inc. remains on track to begin shipping production 15 kilowatt-hour Electrical Energy Storage Units (EESU) to ZENN Motor Company in 2007 for use in their electric vehicles." In September 2007, EEStor co-founder Richard Weir told CNET production would begin in the middle of 2008. In August 2008, it was reported he stated "as soon as possible in 2009". ZENN Motor Company (ZMC) denied there was a delay, just a clarification of the schedule, separating "development" and "commercialization". In March 2008 Zenn stated in a quarterly report a "late 2009" launch was scheduled for an EEStor-enabled EV. In December 2009 Zenn announced that production of the lead acid based ZENN LSV would end April 30, 2010. At that time Zenn did not announce a date for production of an EEstor based car.

In April 2009 EEStor announced third-party certification of permittivity. The press release did not mention the voltage at which it was tested, so EEStor's uniquely high energy density claims remain to be demonstrated.

In July 2009 ZENN Motor Company, as a result of the April 2009 permittivity tests, invested an additional $5 million in EEStor, increasing its share of ownership to 10.7%. A Zenn press release indicates they were able to get a 10.7% stake because other EEStor investors did not increase their stake.

In January 2013 EEStor released a press release that included test results of four samples of dielectric layers tested by System Engineering and Laboratories ("SEAL"). One sample showed a permittivity of 162,291 and an energy density (dielectric layer only) of 73.90 (W.h/L). This sample was tested at 1500 volts.

On June 5, 2013 EEStor, Inc. had Criteria Labs certify certain aspects of a current layer of its electrical energy storage unit (EESU) that had been produced on April 29, 2013 using new materials that provided both high capacitance and high resistance simultaneously. The following data from new layer material was certified by Criteria Labs on June 5, 2013: Average capacitance of the four layers = 0.22 µF, Average Resistance of the four layers = 10.7 MΩ. Subsequently, on June 26, 2013 EEStor, Inc. had the area and thickness of the new material layer certified by TesCom at EEStor, Inc. using TesCom calibrated EEStor, Inc. equipment. The following data from new layer material was certified by TesCom:Average thickness of the four layers = 25.1 µm. The area of each of the four layers = 0.403 cm². The average volume of the four layers = 0.00101 cm³. Using the certified capacitance, area, thickness, and volume the following relative permittivity was calculated:The average relative permittivity of the four layers = 15,476.

On December 16, 2014 EEStor had Intertek release its report on a more comprehensive set of parametric test results from capacitor samples provided by EEStor. The report is available on the EEStor website. Capacitance, leakage, and breakdown voltage from samples with dielectric single layers of varying thickness and from a six-layer sample were evaluated. Using these reported data, the computed permittivity of the single-layer samples was approximately 25, while that of the six-layer sample was approximately 600. Breakdown voltage strengths of the single-layer samples was approximately 75V/ µm, while that of six-layer sample was approximately 6V/ µm. These results are below earlier claimed voltage strengths of an EEStor EESU, while being roughly in-line with the observed inverse scaling (β ∝ k^−1/2) of dielectric strength (β) vs. permittivity (k) from other established hi-k dielectric thin-film materials operating in the para-electric phase. The energy storage density of the samples was also a few orders of magnitude below that required by an EESU, having storage equivalent to lithium ion batteries.

Skepticism from experts and inability to demonstrate claims

EEStor's claims for the EESU exceed by orders of magnitude the energy storage capacity of any capacitor currently sold. Many in the industry have expressed skepticism about the claims. Jim Miller, vice president of advanced transportation technologies at Maxwell Technologies and capacitor expert, stated he was skeptical because of current leakage typically seen at high voltages and because there should be microfractures from temperature changes. He stated "I'm surprised that Kleiner has put money into it."

Furthermore, EEStor's claims for the comprehensive permittivity, breakdown strength, and leakage performance of their dielectric material far exceeded those understood to be consistent with the fundamental physical capabilities of any known elemental material or composite structure. For example, the thermochemical theory of polar molecular bond strengths has been confirmed to be valid for a wide range of materials, and shows that there exists a near universal inverse relationship between a material's permittivity and its ultimate breakdown strength. EEstor's initially claimed material results exceeded the limits of this fundamental relationship by orders of magnitude.

In late 2014 the combined company(ZENN/EEStor) shifted their near-term strategy away from the lucrative energy storage market and released a set of comprehensive performance results for the first time. The results appeared to be consistent with fundamental physics and similar material behaviors, but fell far short of both their initial claims and storage market requirements.

Patent description and claims

EEStor reports a large relative permittivity (19818) at an unusually high electric field strength of 350 MV/m, giving 10,000 J/cm³ in the dielectric. Voltage independence of permittivity was claimed up to 500 V/μm to within 0.25% of low voltage measurements. Variation in permittivity at a single voltage for 10 different components was claimed by measurements in the patent to be less than +/- 0.15%. If true, their capacitors store at least 30 times more energy per volume than (other) cutting-edge methods such as nanotube designs by Dr Schindall at M.I.T., Dr. Ducharme's plastics research, and breakthrough ceramics discussed by Dr. Cann. In such a strong electric field, the permittivity usually decreases due to dielectric saturation, or the dielectric may break down, causing a short circuit between the capacitor electrodes. Northrop Grumman and BASF have also filed patents with similar theoretical energy density claims. EEStor has the only patent which claims to have actually measured the high energy density in sample components.

The EEStor patents cite a journal article and a Philips Corporation patent as exact descriptions of its "calcined composition-modified barium titanate powder." The Philips patent describes "doped barium-calcium-zirconium-titanate" (CMBT) and reports a permittivity of up to 33,500 at 1.8 V/μm, but does not report the permittivity at high electric fields such as the 350 V/μm EEStor claims. EEStor coats its 0.64 micrometer (average size) CMBT particles with 10 nm aluminum oxide (6% by volume) and immerses them in 6% PET plastic by volume, giving 88% CMBT. The patent claims the aluminum oxide coating and PET matrix reduce the net permittivity to 88% of the CMBT permittivity. The Philips patent did not use either aluminum oxide or PET. The dielectric in solution is screen-printed and dried in 10 μm layers, alternating with 1 μm aluminum plates (used to apply the working 3500 V).

A July 2008 press release states the PET plastic matrix allows for better crystal polarization and that this "along with other proprietary processing steps provides the potential of a polarization saturation voltage required by EEStor, Inc." The patent states this is done at 180 °C with 4000 V.

EEStor's US patent 7033406 mentions aluminum oxide and calcium magnesium aluminosilicate glass as coatings, although their subsequent US patent 7466536 mentions only aluminum oxide. Nickel was mentioned in the earlier US patent as the electrode but the later patent uses 1 μm aluminum plates as a less expensive alternative. According to the patents, both changes were made possible by selecting the PET matrix because it is pliable enough to fill voids at only 180 °C.

Partnerships

In July 2005, Kleiner Perkins Caufield & Byers invested $3 million in EEStor.

In April 2007, ZENN Motor Company, a Canadian electric vehicle manufacturer, invested $2.5 million in EEStor for 3.8% ownership and exclusive rights to distribute their devices for passenger and utility vehicles weighing up to 1,400 kg (excluding capacitor mass), along with other rights. In July 2009, Zenn invested another $5 million for a 10.7% stake. A Zenn press release indicates they were able to get a 10.7% stake because other EEStor investors did not increase their stake. Zenn has received $34 million from the equity markets in the past 3 years, and spent $10.1 million of the proceeds on EEStor ownership and technology rights. In December 2009 Zenn canceled plans for the car but plans to supply the drive train. By April 2010, Zenn had cancelled all production of electric vehicles, leaving ownership of EEStor and their rights to the technology as their focus. Zenn raised CAD$2 million in April 2012, mostly on the promise of EEStor's technology.

In January 2008, Lockheed-Martin signed an agreement with EEStor for the exclusive rights to integrate and market EESU units in military and homeland security applications. In December 2008, a patent application was filed by Lockheed-Martin that mentions EEStor's patent as a possible electrical energy storage unit.

In September 2008, Light Electric Vehicles Company announced an agreement with EEStor to exclusively provide EEStor's devices for the two and three wheel market.

ZENN Motor Company Inc. has changed its name to "EEStor Corporation" to better reflect the focus and activities of the Company. The name change was approved by shareholders at the Company's annual and special meeting held on March 31, 2015.