Wingspan 18 m Designer Ermenegildo Preti | Length 7.75 m | |
The CVV 7 Pinocchio was a single seat competition glider designed and built in Italy, first flown in 1952 though designed in 1940. Only one was built.
Contents
Design and development
The Pinocchio was designed at the Centro Volo a Vela (CVV), or Experimental Soaring Centre, of the Royal Polytechnic of Milan by Gildo Preti in 1940 and its construction was started but then interrupted by World War II. In 1946 students began its completion, though it was not finished until 1951 and first flew in April 1952 at Linate, piloted by Riccardo Brigliadori.
For an all wood aircraft the Pinocchio had a high aspect ratio wing, cantilevered, straight tapered on both edges and with semi-elliptical tips. This was built around a single spar with a plywood skinned D-box ahead of it and fabric covering behind. Ailerons reached from the tips to about half span and inboard of them there were airbrakes, mounted at mid-chord, which extended above and below the wings.
The Pinocchio was a high wing aircraft, with the wing mounted on top of the rear fuselage. This was slender, circular in cross section and plywood skinned. The cockpit, with a frameless canopy, was placed immediately ahead of the wing leading edge, its top level with the wing's upper surface. Without a landing skid, the Pinocchio landed on a retractable, sprung monowheel and tail bumper. Its horizontal tail was mounted on top of the fuselage, far enough forward to place the trailing edges of the fabric covered elevators at the rudder hinge. The fin was straight edged and small but the rudder was full, curved and balanced.
Only one Pinocchio was built.
Specifications
Data from Italian Vintage Sailplanes
General characteristics
Performance