Girish Mahajan (Editor)

CP System

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Manufacturer
  
Capcom

Release date
  
July 1988 (1988-07)

CP System

CPU
  
Motorola 68000 (@ 10 MHz)

Display
  
Raster, 384 × 224 pixels (Horizontal), 4096 colors

Input
  
8-way joystick, from 3 to 6 buttons

The CP System (CPシステム, shīpī shisutemu) or CPS is an arcade system board developed by Capcom that ran game software stored on removable ROM cartridges. More than two dozen arcade titles were released for CPS-1, before Capcom shifted game development over to its successor, the CP System II.

Contents

Capcom's Street Fighter II series is perhaps the best known franchise within the CPS game library. The first three titles in the series (The World Warrior, Champion Edition and Hyper Fighting) were all developed on CPS-1 and highly successful.

History

After a number of arcade game boards designed to run only one game, Capcom embarked upon a project to produce a system board that could be used to run multiple games, in order to reduce hardware costs and make the system more appealing to arcade operators.

The system was plagued by many bootleg versions of its games. In particular, there were so many bootleg versions of Street Fighter II, that they were more common in some countries than the official version. This problem was virtually eliminated by Capcom in the later CP System II.

The CP System hardware was also utilized in Capcom's unsuccessful attempt at home console market penetration, the CPS Changer, a domestic version of the CP System similar to the Neo-Geo AES.

Technical specifications

  • CPU:
  • Primary: Motorola 68000 @ 10 MHz (some later boards 12 MHz)
  • Secondary: Zilog Z80 @ 3.579 MHz
  • Sound Chips:
  • Yamaha YM2151 @ 3.579 MHz
  • Oki OKI6295 @ 1 MHz (7.576 kHz samples)
  • Display
  • Resolution: Raster, 384x224 @ 59.6294 Hz
  • Color Depth: 16-bit (12-bit RGB with 4-bit brightness value)
  • Colors available: 65,536
  • Onscreen colors: 4096 (192 global palettes with 16 colors each)
  • Sprites:
  • Simultaneously displayable: 256 (per scanlines)
  • Sizes: 16x16, max. 16 colors (15 unique + 1 transparent)
  • Vertical and Horizontal Flipping capability
  • Tiles: Sizes 8x8, 16x16, 32x32 with 16 colors (15 unique + 1 transparent)
  • Tile Maps: 3 Maps, 512x512, 1024x1024, 2048x2048 pixel
  • 68K RAM: 64 KB WORK RAM + 192 KB VRAM(Shadow)
  • PPU: 192 KB VRAM + 16 KB CACHE RAM
  • Z80 RAM: 2 KB WORK RAM
  • CP System Dash

    A year before releasing the CP System II, Capcom released an enhanced version of the original CP System dubbed the CP System Dash, which had some features that would later be used in the CP System II, such as the Q-Sound chips.

    The CP System Dash boards have four interlocking PCBs and are contained in gray plastic boxes. To combat piracy, "suicide batteries" were implemented, which power the volatile RAM which contained the manual configuration of the display hardware registers, as well as the priorities registers. The CPS-1 Dash 68000 code is not encrypted at all. If the batteries' voltage should drop below +2V, the registers manually defined in factory by Capcom in RAM would be lost, and the PPU would no longer have access to the hardware specific register set on the game used, rendering the game inoperable, and necessitating the operator sending the board to Capcom to be fixed, at his own expense. Unlike the CP System II, CP System Dash sound ROMs were encrypted using "Kabuki" Z80s.

    Capcom Power System Changer

    A home version of the CP System, the Capcom Power System Changer was released in late 1994 in Japan to compete against SNK Neo Geo. Capcom released the CPS Changer as an attempt to sell their arcade games in a home-friendly format. The CPS Changer adapter was basically an encased SuperGun (Television JAMMA adapter), and was compatible with most JAMMA standard PCBs. Capcom's "protection" against people using the CPS Changer on other arcade boards was the physical shape of the device. On a normal JAMMA PCB it would not attach firmly and tended to lean at odd angles, but it would work. The CPS Changer has outputs for composite video, S-video and line-level mono audio.

    The CPS Changer featured Super Famicom controller ports, allowing the use of all Super NES controllers, including their six-button joystick, the "CPS Fighter".

    All of the CPS Changer games used the CPS arcade hardware. The CPS Changer games were simply arcade PCBs in a special plastic shell suitable for home use. This concept was later re-used in the CP System II hardware. Some CPS1 games were changed slightly for home release, sometimes including debugging features or other easter eggs.

    The CPS Changer was sold as a package deal of the console itself, one CPS Fighter joystick controller, and the Street Fighter II ′ (Dash) Turbo game for 39,800 yen. Additional games were sold for about 20,000 yen.

    The final game for the CPS Changer was a back-ported version of Street Fighter Zero. Originally released on the CP System II hardware, this special CPS Changer version, released at a premium 35,000 yen, was degraded slightly for the older hardware: it had fewer frames of animation for the game characters, fewer onscreen colors, and the sound and music effects were sampled at a lower rate.

    References

    CP System Wikipedia