Harman Patil (Editor)

Brede class lifeboat

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Preceded by
  
Rother

Built
  
1981–1985

Succeeded by
  
Arun

In service
  
1982–2002

Brede-class lifeboat

Builders
  
Lochin Marine International Ltd., Rye, East Sussex

Operators
  
Royal National Lifeboat Institution

The Brede-class lifeboat was operated by the Royal National Lifeboat Institution (RNLI) from its stations around the coasts of the United Kingdom between 1982 and 2002, at which time it was the fastest all-weather lifeboat in its fleet. Eleven were put into service and when replaced by larger boats seven were sold for further use as lifeboats, mainly in South Africa.

Contents

The class took its name from the River Brede which joins the River Rother to flow into the English Channel at Rye, Sussex.

History

During the 1960s and 1970s the RNLI had placed a number of fast lifeboats into service. These had mostly been 44 ft (13 m) Waveney-class but there was a need for smaller, more manoeuvrable boats that were larger than the Atlantic 21 inshore lifeboats. A large boat was built using the construction methods of the Atlantic 21 but this Medina-class lifeboat was never adopted. A prototype Brede was constructed in 1981 and the following year the first two production Brede-class were built. These had a larger wheelhouse than the prototype and placed in service at Fowey and Oban lifeboat stations in October. Ten more production boats followed but production ceased in 1985. The first Brede to be withdrawn was RNLB Ann Richie (ON 1080) which only saw five years service. By the end of 1994 the fleet had been reduced to just five boats; three in the relief fleet and those stationed at Poole and Calshot. The boats had been too small to operate in extreme weather and surveys highlighted potential problems with structural strength.

Most of the fleet found new use with other rescue services. One was transported to New Zealand in 1993, and six were sold between 1994 and 2002 for use in South Africa. The NSRI in South Africa announced in September 2016 that they were embarking on a project to replace their ageing Brede lifeboat fleet, starting with Eikos Rescuer II (RNLI 1104) based in Durban, with further replacements planned for every two years. The Brede lifeboats will be sold out of the fleet as they are replaced.

Description

The Brede was built with a glass reinforced plastic (GRP) hull, a strengthened version of a commercial design by Lochin Marine of Rye, Sussex. It was fitted with twin 203 hp diesel engines which gave it a top speed of 20 knots (37 km/h) which was faster than any other all-weather lifeboat in the fleet until the introduction of the Severn and Trent classes in 1991. It had an operating range of 140 nautical miles (260 km).

The hull was divided into five watertight compartments and spaces were filled with buoyant materials which combined with a watertight GRP wheelhouse to give it a self-righting capability. A survivors' cabin was sited forward of the wheelhouse with eight seats and a stretcher could be carried in the wheelhouse which had seats for the four crew members.

RNLI fleet

All built by Lochin Marine, Rye

South Africa

Second-hand Bredes operated by the National Sea Rescue Institute in South Africa.

References

Brede-class lifeboat Wikipedia