Samiksha Jaiswal (Editor)

Severn class lifeboat

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Name
  
Severn class

Cost
  
£2 million

Preceded by
  
Arun class

Built
  
1992–2005

Severn-class lifeboat

Builders
  
Berthon Boat Co, Green Marine (Hull Moldings)

Operators
  
Royal National Lifeboat Institution

At 17 metres (55 ft 9 in) long, the Severn class is the largest lifeboat operated by the Royal National Lifeboat Institution (RNLI). Introduced to service in 1996, the class is named after the River Severn, the longest river in Great Britain. They are stationed at 35 locations around the coasts of the United Kingdom and Ireland to provide coverage up to 50 miles (80 km) out to sea.

Contents

History

In the 1980s the RNLI's fast Arun and Waveney all-weather lifeboats provided coverage 30 miles (48 km) out to sea, operating at up to 18 knots (33 km/h; 21 mph) to cover the distance in two hours in good weather. However, the RNLI felt that they needed the capability to extend their coverage to 50 miles (80 km) radius, which would require lifeboats with a top speed of 25 knots (46 km/h; 29 mph). This resulted in the 17-metre (56 ft) Severn and 14-metre (46 ft) Trent lifeboats.

The prototype Severn was launched in 1991 and was named Maurice and Joyce Hardy. Trials started the following year and lasted until 1998. In 1995, the boat was de-named. Problems were encountered during the trials with the "skegs" that protected the propellers, but were designed to protect the hull by breaking off if the boat hit rocks, as the first ones were too easily broken. Crashing through heavy seas at full speed caused damage to the hull, too. It was transferred to training work when it carried operational number TL-02 and was named Peter and Marion Fulton, but was withdrawn in 2004. It was sold in 2005; in 2008 it was in use as a dive boat at Buckie, carrying the name Gemini Storm.

The first production Severn was The Will. It had been built in 1995 by Berthon Boat Co (Builders of 21 of the 46 Severn-class lifeboats) for Stornoway but had to undergo several modifications before it was fit for service. It was eventually placed in the relief fleet in 1996 and shown to many lifeboat stations where the class was expected to be deployed. It so impressed the crew at Falmouth that they pressed the RNLI to station it there until their own boat was built, and so it was stationed there from January 1997 until December 2001 when it was replaced by Richard Scott Cox. In the mean time Tom Sanderson had been deployed at Stornoway in 1999. The Will returned to the relief fleet after its time at Falmouth and has continued in that role since. Construction of its sister boats continued until 2005.

Description

Severns are constructed of fibre reinforced composite material, and their hard chine semi-displacement hull is built so that it will stay afloat with two of its five compartments flooded. For added manoeuvrability, in addition to twin engines, the Severn also has a bow thruster fitted. The propellers are enclosed so that the Severn can take ground without damaging them. A Y-class inflatable boat can be deployed by an on-board crane for use in shallow water or confined spaces.

Severns have comprehensive electronics systems that include full MF and VHF DSC radio equipment, differential GPS navigator, an electronic chart system, VHF radio direction finder, radar and weather sensors. Provision for survivors includes comprehensive first aid equipment including stretchers, oxygen and Entonox. They carry a portable salvage pump in a water-tight container, and can also carry out pumping and fire-fighting tasks using the engine-driven general service pump.

References

Severn-class lifeboat Wikipedia


Similar Topics