Supriya Ghosh (Editor)

Bollman Truss Railroad Bridge

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Carries
  
Savage Mill Trail

Locale
  
Savage, Maryland

Material
  
cast and wrought Iron

Address
  
Laurel, MD 20723, USA

Total length
  
49 m

Location
  
Savage

Bridge type
  
Truss bridge

Crosses
  
Little Patuxent River

Design
  
Bollman Truss

Longest span
  
2 × 80 feet (24.4 m)

Construction started
  
1852

Opened
  
1869

Body of water
  
Patuxent River

Bollman Truss Railroad Bridge

Similar
  
Savage Mill, Patterson Viaduct, Thomas Viaduct, Carrollton Viaduct, Wills Creek Bollman Bridge

Drone view of bollman truss railroad bridge


The Bollman Truss Railroad Bridge at Savage, Maryland is the sole surviving example of a revolutionary design in the history of American bridge engineering. The 160-foot (48.8 m) double-span truss bridge is one of the oldest standing iron railroad bridges in the United States; currently, however, it is in use carrying the Savage Mill Trail across the Little Patuxent River. It was the first successful all-metal bridge design to be adopted and consistently used on a railroad. The type was named for its inventor, Wendel Bollman, a self-educated Baltimore engineer.

Contents

History

The bridge was built for an unknown location on the main line of the Baltimore and Ohio Railroad in 1852, and was moved to its present location, spanning the Little Patuxent River on the spur to the Savage Mill, in 1887. This spur line dates to around 1840 and originally crossed the river on a stone arch bridge; however, due to alterations to the mill in the 1880s and topographical restrictions, a replacement bridge was needed. The bridge remained in service until the mill closed in 1947; switching crews used additional cars in order to avoid crossing the bridge with locomotives, and thus there was never a need for a more substantial structure. A smaller, narrower example was installed adjacent to the railbridge for road traffic, which was torn down after World War I.

It was the first successful all-metal bridge design to be adopted and consistently used on a railroad. The design employs wrought iron tension members and cast iron compression members. It was an improvement over wooden structures, as the independent structural units lessened the possibility of structural failure. Patented on January 6, 1852, the company built about a hundred of these bridges through 1873. Their durability and ease of assembly greatly facilitated expansion of American railroads in this period. Bollman's Wells Creek Bridge has also survived, but it employs a different type of truss system.

Description

The Bollman Bridge is a two-span through-truss, resting on granite abutments at each end and a granite pier in the middle of the river. The truss structure is a mixture of wrought and cast iron. The truss configuration is the design patented by Bollman as the "Bollman suspension truss" in 1852. Each span is 79.5 feet (24.2 m) long, 25.5 feet (7.8 m) wide and about 21 feet (6.4 m) tall. The Bollman truss suspends the deck from a network of tension members, while the top chord resists compressive forces. The system is therefore referred to as a suspension truss.

The truss includes decorative elements, such as Doric styled vertical members. The cast iron end towers, which bear transfer the weight of the structure to the abutments and pier, are also detailed. A decorative and protective metal enclosure at the top of the towers was lost to vandalism, but was replaced during the restoration work. Metal strips at each portal read "W. BOLLMAN, PATENTEE", "BALTIMORE, MD.", "BUILT BY B&O R.R. CO.", "1869" AND "RENEWED 1866". Replicas of the original strips were installed during the restoration.

The bridge was brightly painted, using red oxide for the towers and the heavier compression members and an ivory color for the lighter tension members. The bridge was originally painted in a three color scheme, documented in black and white photography, with specific shades unknown.

Restoration

In 1966 the American Society of Civil Engineers introduced a new program, designating the bridge as the first-ever Historic Civil Engineering Landmark. The bridge was listed on the National Register of Historic Places on December 18, 1972, and was designated a National Historic Landmark on February 16, 2000. The bridge was surveyed for restoration in 1978 by Modjeski and Masters with deterioration of the floor trusses noted. A $214,200 restoration contract was let to Dewey-Jordan of Frederick in September 1982. The bridge was restored by Wallace, Montgomery & Associates, LLP, for the Howard County Department of Recreation and Parks in 1983, and more recently underwent additional preservation work and was rededicated on September 16, 2000. Today it receives regular maintenance as part of Savage Park. Nearby Bollman Bridge Elementary School takes its name from the historic bridge.

References

Bollman Truss Railroad Bridge Wikipedia