Harman Patil (Editor)

Bala Junction railway station

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Place
  
Grid reference
  
SH 937 355

1 November 1882
  
Opened

Platforms in use
  
3

Area
  
Pre-grouping
  
18 January 1965
  
Closed to passengers

Bala Junction railway station httpsuploadwikimediaorgwikipediacommonsthu

Similar
  
Cwm Prysor Halt railway st, Trawsfynydd railway station, Manod railway station, Tan‑y‑Manod railway station, Arenig railway station

Bala Junction railway station in Gwynedd, Wales, was formerly a station on the Ruabon to Barmouth line. It closed to passengers on Monday 18 January 1965. Bala Junction was unusual in that it was inaccessible by road and merely served as an interchange station; it was located about ¾ mile to the south-east of the town of Bala.

Contents

Bala Junction railway station Bala New railway station Wikipedia

The station was at the junction with the Blaenau Ffestiniog branch. It was built as a crossing point for trains on the Bala Ffestiniog and Ruabon Barmouth lines, and featured three platforms with a small waiting room and signalbox on a central island platform. There was also a cast-iron GWR water tank.

Bala Junction railway station Bala Railway Station Photo Bala Junction Frongoch Blaenau

History

Bala Junction railway station Bala Railway Station Photo Bala Junction Frongoch Blaenau

Opened by the Great Western Railway, it remained in that company through the Grouping of 1923. The station passed to the Western Region of British Railways on nationalisation in 1948. Passenger services to Bala and on the Ruabon-Barmouth line ceased in January 1965; the service beyond Bala to Blaenau Festiniog having been withdrawn in 1960.

Bala Junction railway station Bala Railway Station Photo Bala Junction Frongoch Blaenau

During its operational life, Bala Junction served as an interchange station for the branch line train to Blaenau Festiniog, usually operated by small tank locomotives such as the 6400 Class 0-6-0PT and 5800 Class 0-4-2T tank locomotives. These trains did not run beyond Bala Junction, instead returning north to the GWR station at Blaenau Festiniog. There were no goods facilities here either; all goods trains stopped to shunt detached wagons for the branch line train.

As a junction station, Bala Junction was equipped with standard GWR lower quadrant semaphore signals to control train movements between the Bala Ffestiniog and Ruabon-Barmouth lines. These were used particularly when the branch line train was shunting in preparation for its return to Blaenau Festiniog as there were no turning facilities here. To run around, the branch line engine had to cross from Platform 3 (the Bala Ffestiniog platform) onto the main line and run back along Platform 2, used by eastbound trains running to Ruabon.

As of 2014, the only remnants at Bala Junction are the trackbeds of the Bala Ffestiniog and Ruabon-Barmouth lines and the platform faces. The site is close to a nearby dam; part of the access road for this uses the formation of the Bala Ffestiniog line, passing close to the remains of a short bridge that carried the line into Bala Junction itself.

Further material

  • Coleford, I. C. (October 2010). Smith, Martin, ed. "By GWR to Blaenau Ffestiniog (Part One)". Railway Bylines. Radstock: Irwell Press Limited. 15 (11). 
  • Coleford, I. C. (November 2010). Smith, Martin, ed. "By GWR to Blaenau Ffestiniog (Part Two)". Railway Bylines. Radstock: Irwell Press Limited. 15 (12). 
  • Ferris, Tom (2004) [1961]. British Railways Volume 4 - Bewdley To Blaenau (DVD). demanddvd. DEMDVD084. 

  • References

    Bala Junction railway station Wikipedia