Neha Patil (Editor)

Whigham GW 6

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
First flight
  
1983

The Whigham GW-6 is an American mid-wing, single-seat, glider that was designed and constructed by Gene Whigham, a retired flight test engineer for Convair.

Contents

Design and development

Whigham completed and flew the GW-6 in 1983. The aircraft was intended to be a very lightweight glider and incorporated some design innovations to achieve that goal. The wing spar was built up from extruded angles, with a sheet aluminium spar web. The wing ribs are made from sheet aluminium and the wing is covered in doped aircraft fabric covering. The wing has large ailerons, a 22:1 aspect ratio and a 44 ft (13.4 m) span. The tailplane and elevator are small in size. The normal flight centre of gravity is at 35% of chord, which is more aft than usual with the NACA 43012A airfoil employed.

Only one GW-6 was constructed and it was registered with the Federal Aviation Administration as an Experimental - Amateur-built.

Operational history

Soaring Magazine reported that the GW-6 had about 65 hours of flying time by late in the summer of 1983, Whigham having flown it that season while building the GW-7. In July 2011 the aircraft was still on the FAA registry and owned by John B. Waters of San Diego, California.

Specifications (GW-6)

Data from Soaring

General characteristics

  • Crew: one
  • Wingspan: 44 ft 0 in (13.41 m)
  • Wing area: 88 sq ft (8.2 m2)
  • Aspect ratio: 22:1
  • Airfoil: NACA 43012A
  • Empty weight: 323 lb (147 kg)
  • Gross weight: 570 lb (259 kg)
  • Performance

  • Maximum glide ratio: 32:1
  • Wing loading: 6.47 lb/sq ft (31.6 kg/m2)
  • References

    Whigham GW-6 Wikipedia