Name Tyne-class lifeboat Succeeded by Trent, Tamar, Shannon Built 1982–1990 | Preceded by Rother, Oakley, Solent Cost £1.2 Million | |
 | ||
Operators Royal National Lifeboat Institution | ||
The Tyne-class lifeboat is a class of lifeboat that currently serves the shores of the UK and Ireland as a part of the RNLI fleet. They are named after the River Tyne in north-east England.
Contents
They are designed to be launched from slipways or operate in shallow waters where hitting the bottom is a concern. The class was introduced in 1982, and the last boat was built in 1990.
The Tyne-class is gradually being retired. Initially they were superseded by the Tamar class lifeboat, which is 7 knots faster than the Tyne class. However, only 27 Tamars have been built, compared to 40 Tynes, leaving the remaining Tynes on station to be replaced with the latest Shannon-class boats.
History
The two prototype boats were built in 1982, 47-001 City of London (ON 1074) and 47-002 Sam and Joan Woods (ON 1075). Following completion of the test programme City of London entered service at Selsey in November 1983 while Sam and Joan Woods was put into service in the relief fleet in 1984 by which time the first production boats were under construction.
Eventually forty boats were built. The last, Hermione Lady Colwyn (ON 1158), went into service at Shoreham Harbour in September 1990 and served at that station until 2010 when she was withdrawn and sold, the only Tyne not to record over twenty years service. The RNLI had retired the first of the class in 2006 although eight of the earliest boats were sold to China for further duties in 2007 and 2008. Selsey is scheduled to receive a new Shannon class boat in 2017 after almost 34 years service by Tyne-class boats, the longest of any station.
Design
The unusual design of this lifeboat derives from the requirement to deploy from slipway stations built for previous generations of lifeboats, with limited clearance. The Tyne also lies afloat at stations where the approaches, or operating areas, are particularly shallow. As the lifeboat propellers are protected by heavy bilge keels, she is particularly well suited to operate where there is a danger of hitting the bottom, or tapping as it is known colloquially. The Tyne has a steel hull and aluminium superstructure. The first two were powered by General Motors 8V-71 diesels of 425 bhp, but the production boats switched to the newer GM 6V-92 of the same power. In the 1990s some boats were re-engined with Detroit Diesel 92 DDEC 6 cylinder engines of 565 bhp. During the course of production the weight of the boats increased by over 1 ton and this required an increase in superstructure volume to preserve the self-righting capability resulting in the height of the aft cabin being raised. Later, further doubts about the self-righting capability resulted in air bags being added to the aft cabin roof.