Operator(s) KiwiRail Rolling stock None | Character Rural Terminis Thames, Morrinsville | |
 | ||
Status Closed, section to Waitoa open, renamed the Waitoa Branch Closed 1991 (from Waitoa—Thames) Line length 74.07 km (46.02 mi) Morrinsville - Thames
11 km (6.8 mi) Open Owner New Zealand Railways Corporation | ||
Thames branches driver s eye view preview
The Thames Branch railway line connected Thames, New Zealand, with Hamilton and was originally part of the East Coast Main Trunk railway. Part of the line between Morrinsville and Waitoa remains open and is in use as the Waitoa Branch line, connecting to the Fonterra Dairy Factory at Waitoa.
Contents
Ms society richmond and kingston on thames branch pip talk 8th april 2013 part 2
History
The discovery of gold in the Thames area in 1852 provided the impetus for building a railway line from Auckland to Thames. In 1872 the Auckland Provincial Council recommended a rail connection to Thames, primarily due to issues associated with barging coal from North Auckland coal mines to Thames to serve the gold mining industry. Surveys were completed in 1878, despite opposition from local Maori, putting the cost of the 54 km line at £178,000. Premier Sir George Grey turned the first sod of the line at Thames that year, but 18 months later work from Thames was stopped by the 1880 Royal Commission ordered by Grey's successor.
However, construction of the section from Hamilton continued, albeit slowly. The line crossed the Waikato River and was opened from Morrinsville to Te Aroha on 1 March 1886, to Paeroa on 20 December 1895, and finally to Thames on 19 December 1898. The Minister of Railways, Alfred Cadman, drove the first train into Thames, headed by an F class locomotive.
One of the lines first major traffic sources was A & G Price of Thames, who started producing locomotives for NZGR from 1904. Following the completion of the North Island Main Trunk in 1908, the government began planning the East Coast Main Trunk in 1909, eventually to connect to Gisborne. Work began in 1911 on a link from Paeroa through the Karangahake Gorge to Waihi. From this stage the Thames Branch was defined as Paeroa to Thames, with the Morrinsville - Paeroa section being designated as part of the East Coast Main Trunk. In 1928 the passenger service was being provided by a steam railcar. The opening of the Kaimai Tunnel in 1979 and the closure of the Paeroa - Katikati section of the East Coast Main Trunk led to the re-designation of the Morrinsville - Thames section as the Thames Branch.
Scheduled trains to Thames ceased 1985. The line closed on 28 June 1991. The track was lifted during May 1995, between Thames and the dairy factory at Waitoa. In 2004 the section of the line as far as Waitoa (still in place) was re-opened for dairy traffic, as part of Fonterra's policy of moving more freight by rail.
The Thames Railway Station building of 1898 survives as it was listed by NZHPT Category II in 1982. It is a standard Vintage station, with gables, finials and scalloped bargeboards.
Services
Currently services to Waitoa consist of unscheduled shunts to Morrinsville carrying dairy products, usually powered by a DSJ class shunting locomotive.
Cycleway
Most of the former rail alignment is now part of the Hauraki Rail Trail of the New Zealand Cycle Trail network, with the local councils in 2011 securing a 20-year lease, though the option of prior termination remains should KiwiRail intend to relay the railway to run trains along the corridor again.