Sport Bowling is any form of ten pin bowling that uses patterns of lane oil to reduce the effectiveness of modern bowling balls. Sport Bowling was created by the United States Bowling Congress, the governing body of the sport of ten pin bowling, to offer players the opportunity to bowl on exactly the same lane conditions and oil patterns that professional bowlers face on the PBA Tour. Sport Bowling originally referred to leagues, known as PBA Experience Leagues, which are offered in conjunction with the Professional Bowlers Association. However, the term is now used to refer to any bowling event which incorporates a "sport shot" or oil pattern.
Contents
- Lane Friction Topography
- Break Point
- House Patterns
- USBC Sport Certified PBA Experience Patterns
- First generation patterns
- Second generation patterns
- References
As bowling technology has progressed the ability to consistently and strongly hook a bowling ball became significantly easier and as a result professional and league bowling scores increased. Over time achieving honor scores (e.g. 300 games, 800+ series) became far more common to the point of diminishing the accomplishment associated with achieving these scores. To counter this trend the idea of custom oil patterns or "sport shot" that could be programmed into a lane conditioning machine and laid on the lane emerged.
Lane Friction Topography
Lane conditions are created by cleaning the lane surface and then applying lane oil in a pattern via a lane oiling machine. Lane oil is designed to both protect the surface and influence bowling ball hook. Ball hook is the product of the its surface material (cover stock), balance (core), direction of travel, speed of delivery, and spin (angular momentum). As the ball travels towards the pins it interacts with the lane surface and reacts to friction. As the ball encounters friction its angular momentum is consumed changing its trajectory. In areas of the lane where there is less oil the ball will change direction (hook) and in areas of the lane where there is more oil the ball will not change direction (skid).
A "topographic map" that illustrates the location and quantity of oil placed on the lane for each oil pattern can be found. On these charts areas with a large quantities of oil as depicted as high terrain and areas with a small quantities of oil are depicted as low terrain. Bowlers can use these maps to formulate strategies to manipulate their ball to cross this frictional landscape.
Break Point
Each oil pattern has a "break point" at which the bowling ball moves off of the most heavily oiled part of the lane onto the "back end". The back end is the place where the majority of the bowling ball hook is desired by an experienced bowler because it creates "angle to the pocket". Bowling balls that simultaneously (or almost simultaneously) hit the one and two pin on a strong angle (up to 6 degrees) from the left side or the one and three pin from the right side are very likely to strike. A properly executed "pocket hit" causes the bowling ball to travel off-center through the pins driving these into other pins either directly or off of the walls on either side of the pin deck. It's the side-to-side "pin action" that creates a greater likelihood to strike.
The "Rule of 31" can be used to estimate the break point for different patterns (calculated as the distance of length of the oil pattern in feet minus 31). This value indicates the board on the lane at the end of the oil pattern that is approximately the break point.).
House Patterns
A typical "house pattern" ranges from 38 to 42 feet in length and the oil is tapered from the outside to the center such that the outside of the lane has the least amount of oil and the center has the most. The lack of oil on the outside of the lane and an abundance of oil near the center creates a funnel effect that causes balls rolled on the outside of the lane to hook to the pins and balls rolled in middle of the lane to slide to the pins.
USBC Sport Certified - PBA Experience Patterns
USBC sport patterns range from 32 to 53 feet in length, creating a break point either much further up or back on the lane as compared to a typical house pattern. An even application of oil across the width of the lane largely eliminates the funnel effect built into the typical house shot thus requiring greater accuracy and speed control to consistently hit the break point with the desired back end reaction. To master each sport shot requires knowledge and experience to understand where to play and how to adjust as the pattern changes.
First generation patterns
Second generation patterns
Introduced by the PBA May 7, 2013