Type Monument, sculpture Completed 16th of Sept. 2003 Antenna spire 121.2 m (397.6 ft) Height 120 m Cost 4 million EUR Construction started 2002 | Location Dublin, Ireland Client Dublin City Council Engineer Arup Opened 21 January 2003 Province Leinster Architect Ian Ritchie | |
 | ||
Similar General Post Office - Dublin, Ha'penny Bridge, Christ Church Cathedral, Dublin Castle, St Patrick's Cathedral - Dublin | ||
Spire of dublin ireland
The Spire of Dublin, alternatively titled the Monument of Light (Irish: An Túr Solais), is a large, stainless steel, pin-like monument 120 metres (390 ft) in height, located on the site of the former Nelson's Pillar on O'Connell Street in Dublin, Ireland.
Contents
Building the spire of dublin
Description
The spire was designed by Ian Ritchie Architects, who sought an "Elegant and dynamic simplicity bridging art and technology". The contract was awarded to SIAC-Radley JV and it was manufactured by Radley Engineering of Dungarvan, County Waterford, and erected by SIAC Construction Ltd & GDW Engineering Ltd.
The first section was installed on 18 December 2002. Construction of the sculpture was delayed because of difficulty in obtaining planning permission and environmental regulations. The Spire consists of eight hollow stainless steel cone sections, the longest being 20 m (66 ft), which were installed on 21 January 2003. It is an elongated cone of diameter 3 m (9.8 ft) at the base, narrowing to 15 cm (5.9 in) at the top. It features two tuned mass dampers, designed by engineers Arup, to counteract sway. The steel underwent shot peening to alter the quality of light reflected from it.
The pattern around the base of the Spire is based on a core sample of rock formation taken from the ground where the spire stands and the DNA double helix. The pattern was applied by bead blasting the steel through rubber stencil masks whose patterns were created by water jet cutting based on core sample drawings supplied by the contractor. The design around the 10 m (33 ft) lower part of the Spire was created by the architects making a 3D pattern model combining the core sample and double helix and then digitally translated to a 2D image drawing supplied to the contractor and used by specialists for cutting the masking material.
At dusk, the base of the monument is lit and the top 10 m (33 ft) is illuminated through 11,884 holes through which light-emitting diodes shine.
Context
The monument was commissioned as part of a street layout redesign in 1999. O'Connell Street had declined for a number of reasons such as the proliferation of fast food restaurants and the opening of bargain shops using cheap plastic shop fronts which were unattractive and obtrusive; the existence of derelict sites; and the destruction in 1966 of Nelson's Pillar following a bombing by former IRA members.
The Anna Livia monument was installed on the site for the 1988 Dublin Millennium celebrations. In the 1990s, plans were launched to improve the streetscape. The number of trees in the central reservation, which had overgrown and obscured views and monuments, was reduced dramatically. This was controversial, as the trees had been growing for a century. Statues were cleaned and in some cases relocated. Shop-owners were required to replace plastic signage and frontage with more attractive designs. Traffic was re-directed where possible away from the street and the number of traffic lanes was reduced to make it more appealing to pedestrians. The centrepiece of this regeneration was to be a replacement monument for Nelson's Pillar, the Spire of Dublin, chosen from a large number of submissions in an international competition by a committee chaired by the Lord Mayor of Dublin, Joe Doyle. The Anna Livia monument was moved to make way for the Spire in 2001.
Award nominations
The monument has been nominated for the following awards: