Power type Steam Model CGR 8th Class (2-8-0) | Serial number ALCO 25454 Build date 1930 | |
 | ||
Designer Cape Government Railways
(H.M. Beatty) Builder American Locomotive Company
South African Railways | ||
The South African Railways Class 8R 4-8-0 of 1930 was a steam locomotive.
Contents
In 1901 and 1902, the Cape Government Railways placed sixteen 8th Class 2-8-0 Consolidation type steam locomotives in service. In 1912, when they were assimilated into the South African Railways, they were renumbered and reclassified to Class 8X. One of them was reboilered and converted to a 4-8-0 Mastodon type wheel arrangement in 1930 and reclassified to Class 8R.
Manufacturers
The first 8th Class 2-8-0 Consolidation type locomotive of the Cape Government Railways (CGR) was designed by H.M. Beatty, the Chief Locomotive Superintendent of the CGR from 1896 to 1910. Fourteen of these engines were built by the American Locomotive Company (ALCO) in 1902.
They were conceived as mixed traffic locomotives, equally suitable for goods and passenger work, and had bar frames, narrow fireboxes, used saturated steam and had cylinders with overhead slide valves which were actuated by inside Stephenson valve gear. The Type WG bogie tender entered service with these engines.
South African Railways
When the Union of South Africa was established on 31 May 1910, the three Colonial government railways (CGR, Natal Government Railways and Central South African Railways) were united under a single administration to control and administer the railways, ports and harbours of the Union. Although the South African Railways and Harbours came into existence in 1910, the actual classification and renumbering of all the rolling stock of the three constituent railways required careful planning and was only implemented with effect from 1 January 1912. In 1912, these Consolidation types were designated Class 8X on the South African Railways (SAR).
Wheel arrangement modification
In 1930, one of the Class 8X locomotives, SAR no. 883, was reboilered with a purpose-built boiler by SAR Chief Mechanical Engineer A.G. Watson. At the same time, it was equipped with superheating and piston-valve cylinders. The locomotive was converted to a 4-8-0 Mastodon type wheel arrangement, by replacing the leading pony truck with a bogie in a belated attempt to rectify one of the shortcomings of the original Class 8 2-8-0 locomotive. To accommodate the four-wheeled bogie, the front of the bar frame was apparently modified to reposition the cylinders.
The modified no. 883 was reclassified and became the sole Class 8R locomotive. No other such conversions were done, since the Class 8 family had already begun to be displaced by newer and more powerful locomotives and many would be withdrawn from service by the late 1930s.
Service
Class 8R no. 883 was put to work in the Eastern Transvaal. Even though some did not consider the rebuilding a success, the engine remained in service for nine years, until it was withdrawn from service in 1939.