Power type Steam Serial number 4193-4194 Build date 1903 | Builder Kitson and Company Model CGR Karoo | |
 | ||
Designer Cape Government Railways
(H.M. Beatty) | ||
The South African Railways Class 5A 4-6-2 of 1903 was a steam locomotive from the pre-Union era in the Cape of Good Hope.
Contents
In 1903, the Cape Government Railways placed two Karoo Class steam locomotives with a 4-6-2 Pacific type wheel arrangement in passenger service. In 1912, when they were assimilated into the South African Railways, they were renumbered and designated Class 5A.
Design
The Karoo Class of the Cape Government Railways (CGR) was the first tender locomotive with a 4-6-2 Pacific type wheel arrangement to be introduced in Africa. It was the logical development of the CGR 6th Class 2-6-2 Prairie type which later became the Class 6Y on the South African Railways (SAR).
Designed by CGR Chief Locomotive Superintendent H.M. Beatty at the Salt River shops in Cape Town, it was acquired to cope with the increasing weight of passenger trains on the one-in-eighty gradients between Beaufort West and De Aar.
The locomotive had a bar frame, Stephenson valve gear and used saturated steam. At the time, there was a general belief that any appreciable raising of the boiler pitch would result in a top-heavy locomotive. Since Beatty was very cautious about raising the boiler's centre line to more than twice the rail gauge, or 7 feet (2,134 millimetres), and in this case also to accommodate the large 60 inches (1,520 millimetres) diameter coupled wheels, he resorted to cutting the boiler shell and installing specially shaped pockets to obtain the required clearance.
Manufacturer
In 1903, two of these locomotives were built by Kitson and Company, immediately after building the two 6th Class 2-6-2 Prairie locomotives since their works numbers follow in sequence. They were numbered 903 and 904, but were not allocated class numbers by the CGR and instead became known as the Karoo Class after the region of the Western System which they were designed to work in.
Kitson’s later used the Karoo design as basis for a batch of Pacific type locomotives which it built for the Midland Railway of Western Australia.
Characteristics
One of the most striking features of the Karoo Class was the length of its boiler, which was accentuated by the extended smokebox. The length of the smokebox was over 8 feet (2,438 millimetres) and the distance between the boiler's tube-plates was 14 feet 6 1⁄4 inches (4,426 millimetres).
The engine used Richardson slide valves, arranged above the cylinders and actuated by the Stephenson motion and rocker shafts. The eccentrics were fitted to the trailing coupled wheel axle, which resulted in exceptionally long valve connecting rods of 7 feet 10 1⁄4 inches (2,394 millimetres).
South African Railways
When the Union of South Africa was established on 31 May 1910, the three Colonial government railways (CGR, Natal Government Railways and Central South African Railways) were united under a single administration to control and administer the railways, ports and harbours of the Union. Although the South African Railways and Harbours came into existence in 1910, the actual classification and renumbering of all the rolling stock of the three constituent railways were only implemented with effect from 1 January 1912.
In 1912, these two locomotives were renumbered 721 and 722 and designated Class 5A on the SAR.
Service
In service, the Class 5A locomotives performed excellently. Beatty's annual report for 1905 stated that they ran 159,000 miles (256,000 kilometres) before a failure occurred, that failure being a hot box. They spent most of their working lives in the Karoo until they were displaced by larger locomotives. They were then placed in suburban service working out of Cape Town, where they remained until they were withdrawn from service c. 1940.