Power type Steam | Serial number See table Build date 1926-1929 | |
 | ||
Builder Dübs and CompanySouth African Railways | ||
The South African Railways Class 17 4-8-0TT of 1926 was a steam locomotive from the pre-Union era in the Natal Colony.
Contents
Between 1926 and 1929, to address a shortage of suitable shunting locomotives, the South African Railways rebuilt twenty-one Class A 4-8-2T Mountain type tank steam locomotives to Class 17 4-8-0TT Mastodon type tank-and-tender locomotives.
Manufacturers
The Natal Government Railways (NGR) Class D 4-8-2T Mountain type tank locomotive was designed by William Milne, the locomotive superintendent of the NGR from 1877 to 1896, and built by Dübs and Company. One hundred of these locomotives were delivered in ten batches by Dübs between 1888 and 1899, and in 1915 another two were built from spare parts by the South African Railways (SAR) in their Durban shops.
Belpaire firebox
Beginning in 1905, these NGR Class D locomotives, originally known on the NGR as the "Dübs A", were gradually reboilered and fitted with Belpaire fireboxes with wider firegrates. The unmodified locomotives were then designated NGR Class D1, while the modified locomotives with Belpaire fireboxes were designated Class D2. In SAR service, the NGR Class D1 and D2 were both designated Class A in 1912, while the modified locomotives were referred to as Class A Belpaire.
Rebuilding
When a shortage of suitable shunting locomotives developed in the 1920s, as a result of increasing traffic throughout the country and particularly on the Witwatersrand, the SAR modified twenty-one of the Class A Belpaire 4-8-2T Mountain type tank locomotives. The modifications were done between 1926 and 1929 and consisted of the removal of their trailing bissel bogies and coal bunkers, the shortening of their main frames and the addition of tenders to increase their coal and water capacity, thereby converting them to 4-8-0TT Mastodon type tank-and-tender locomotives.
Tenders from various scrapped locomotive types were used. The tender depicted in the main picture is a three-axle tender, while the official SAR locomotive diagram depicts a tender with four axles on two bogies. The bogie tenders which were used, were similar to those originally used with the Class 7E.
Service
These twenty-one rebuilt 4-8-2TT locomotives were reclassified to Class 17 and renumbered in the range from 1415 to 1435. They were employed as shunting engines around Durban and Port Elizabeth and were withdrawn from service by 1961, more than seventy years after the first one was built.
In November 1953, two of these locomotives, numbers 1423 and 1431, were purchased by the Zambezi Saw Mills Company, for use on their Livingstone-Mulobezi logging railway in Northern Rhodesia. They were scrapped between 1961 and 1963.