Supriya Ghosh (Editor)

Shear flow

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Shear flow

The term shear flow is used in solid mechanics as well as in fluid dynamics. The expression shear flow is used to indicate:

Contents

  • a shear stress over a distance in a thin-walled structure (in solid mechanics);
  • the flow induced by a force (in a fluid).
  • In solid mechanics

    For thin-walled profiles, such as that through a beam or semi-monocoque structure, the shear stress distribution through the thickness can be neglected. Furthermore, there is no shear stress in the direction normal to the wall, only parallel. In these instances, it can be useful to express internal shear stress as shear flow, which is found as the shear stress multiplied by the thickness of the section. An equivalent definition for shear flow is the shear force V per unit length of the perimeter around a thin-walled section. Shear flow has the dimensions of force per unit of length. This corresponds to units of newtons per meter in the SI system and pound-force per foot in the English Engineering and British Gravitational Systems.

    Origin of Shear Flow

    When a transverse shear force is applied to a structure, such as a beam, the result is variation in bending normal stresses along the length of the beam. This variation necessitates an internal horizontal shear stress within the beam that varies with position y' from the neutral axis in the beam. The concept of complementary shear then dictates that a shear stress also exists along the front face of the beam. As described above, in thin-walled structures the variation with thickness can be neglected, and the shear stress along the front face of the structure can be examined as shear flow, or the shear stress multiplied by the thickness of the element.

    Applications of Shear Flow

    The concept of shear flow is particularly useful when analyzing semi-monocoque structures, which can be idealized using the skin-stringer model. In this model, the longitudinal members, or stringers, carry only axial stress, while the skin or web resists the externally applied torsion and shear force. In this case, since the skin is a thin-walled structure, the internal shear stresses in the skin can be represented as shear flow. In design, the shear flow is sometimes known before the skin thickness is determined, in which case the skin thickness can simply be sized according to allowable shear stress.

    Shear Center

    For a given structure, the shear center is the point in space at which shear force could be applied without causing torsional deformation (e.g. twisting) of the cross-section of the structure. The shear center is an imaginary point, but does not vary with the magnitude of the shear force - only the cross-section of the structure. The shear center always lies along the axis of symmetry, and can be found using the following method:

    1. Apply an arbitrary resultant shear force
    2. Calculate the shear flows from this shear force
    3. Choose a reference point o an arbitrary distance e from the point of application of the load
    4. Calculate the moment about o using both shear flows and the resultant shear force, and equate the two expressions. Solve for e
    5. The distance e and the axis of symmetry give the coordinate for the shear center, independent of the shear force magnitude.

    Calculating Shear Flow

    By definition, shear flow through a section of thickness t is calculated using q = τ t , where τ = V Q I t . Thus the equation for shear flow in a particular web section of the cross-section of a thin-walled structure (in this case symmetric across the x-axis) is:

    q = V y Q x I x

    where

    q - the shear flow Vy - the shear force perpendicular to the neutral axis x through the entire cross-section Qx - the first moment of area about the neutral axis x for a particular web section of the cross-section Ix - the second moment of area about the neutral axis x for the entire cross-section

    In fluid mechanics

    In fluid mechanics, the term shear flow (or shearing flow) refers to a type of fluid flow which is caused by forces, rather than to the forces themselves. In a shearing flow, adjacent layers of fluid move parallel to each other with different speeds. Viscous fluids resist this shearing motion. For a Newtonian fluid, the stress exerted by the fluid in resistance to the shear is proportional to the strain rate or shear rate.

    A simple example of a shear flow is Couette flow, in which a fluid is trapped between two large parallel plates, and one plate is moved with some relative velocity to the other. Here, the strain rate is simply the relative velocity divided by the distance between the plates.

    Shear flows in fluids tend to be unstable at high Reynolds numbers, when fluid viscosity is not strong enough to dampen out perturbations to the flow. For example, when two layers of fluid shear against each other with relative velocity, the Kelvin–Helmholtz instability may occur.

    References

    Shear flow Wikipedia