 | ||
The serpentine geometry plasma actuator represents a broad class of plasma actuator. The actuators vary from the standard type in that their electrode geometry has been modified in to be periodic across its span.
Contents
History
This class of plasma actuators was developed at the Applied Physics Research Group (APRG) at the University of Florida in 2008 by Drs. Subrata Roy and Chin-Cheng Wang for the purpose of controlling laminar and turbulent boundary layer flows. Since then, APRG has continued to characterize and develop uses for this class of plasma actuators. Several patents resulted from the early work on serpentine geometry plasma actuators
In 2013, these actuators started to get broader attention in the scientific press, and several articles were written about these actuators, including articles in AIP's EurekAlert, Inside Science and various blogs.
Current Research and Operating Mechanisms
Serpentine geometry plasma actuators (like other Dielectric Barrier Discharge actuators, i.e. plasma actuators) are able to induce an atmospheric plasma and introduce an electrohydrodynamic body force to a fluid. This body force can be used to implement flow control, and there are a range of potential applications, including drag reduction for aircraft and flow stabilization in combustion chambers.
The important distinction between serpentine plasma actuators and more tradition geometries is that the geometry of the electrodes has been modified in order to periodic across its span. As the electrode has been made periodic, the resulting plasma and body force are also spanwise periodic. With this spanwise periodicity, three-dimensional flow effects can be induced in the flow, which cannot be done with more traditional plasma actuator geometries.
It is thought that the introduction of three-dimensional flow effects allow for the plasma actuators to apply much greater levels of control authority as they allow for the plasma actuators to project onto a greater range of physical mechanisms (such as boundary layer streaks or secondary instabilities of the Tollmien-Schlichting wave). Recent work indicate that these plasma actuators may have a significant impact on controlling laminar and transitional flows.
With the greater level of control authority that these plasma actuators may potentially possess, there is currently research being performed at several labs in the United States and in the United Kingdom looking to apply these actuators for real world applications.