Samiksha Jaiswal (Editor)

Salginatobel Bridge

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Crosses
  
Salgina Valley

Longest span
  
90 metres (300 ft)

Opened
  
13 August 1930

Total length
  
133 m

Architect
  
Locale
  
Schiers, Switzerland

Width
  
3.5 metres (11 ft)

Construction started
  
1929

Height
  
90 m

Location
  
Schiers

Salginatobel Bridge httpsuploadwikimediaorgwikipediacommonsthu

Design
  
Similar
  
Schwandbach Bridge, Alps, Sunniberg Bridge, Ganter Bridge, Grüsch‑Danusa

Salginatobel Bridge is a reinforced concrete arch bridge designed by Swiss civil engineer Robert Maillart. It was constructed across an alpine valley in Schiers, Switzerland between 1929 and 1930. In 1991, it was declared an International Historic Civil Engineering Landmark, the thirteenth such structure and the first concrete bridge so designated.

Contents

Map of Salginatobelbr%C3%BCcke, 7228 Schiers, Switzerland

As with his Schwandbach Bridge and Vessy Bridge, the structure's fame among civil engineers is a consequence of the techniques involved and the elegance of its design rather than its prominent location: it serves a town of about 2,500 people but is often visited by designers.

Salginatobel bridge mp4


Design and history

Maillart had previously designed a three-hinged arch bridge over the Rhine at Tavanasa in 1904. In the 51 metres (167 ft) span Tavanasa bridge, the arch is thinnest at its crown and springing points, thickening in between to reflect the shape of its bending moment diagram. This bridge was destroyed by an avalanche in September 1927. Although Maillart didn't win the contract for a replacement bridge, he entered a competition the following year for the bridge at Salginatobel, with a three-hinged arch spanning 90 metres (300 ft) that used the same overall form as at Tavanasa. In conjunction with contractor Florian Prader, Maillart's design was the least expensive of nineteen entries.

The Salginatobel bridge arch is 133 metres (436 ft) long in total, and its main element is a hollow concrete box girder over the central part of the arch. It carries a roadway 3.5 metres (11 ft) wide, supported on reinforced concrete pillars above the ends of the arches.

The falsework was built by the Graubünden carpenter Richard Coray in late summer 1929, and the rest of the construction started in 1930. The bridge was officially opened on 18 August 1930.

Although regarded as a pioneering work, several aspects of its construction lacked durability, such as the absence of bridge deck waterproofing, low concrete cover and poor drainage. In 1975 and 1976 it was extensively repaired, the parapets were modified, and waterproofing was added. However, by 1991, deterioration had continued, with the parapets becoming unsafe. The waterproofing and drainage were replaced and amended, and most of the existing concrete surface removed and replaced by shotcrete. The parapets were completely rebuilt. Completed in 1998, this repair work cost 1.3 million US dollars.

Praise and criticism

  • 1947, the bridge was featured with other of Maillart's works in a four-month exhibit at the Museum of Modern Art, New York
  • Salginatobel Bridge was designated a Swiss heritage site of national significance.
  • 1991, it was designated an International Historic Civil Engineering Landmark by the American Society of Civil Engineers
  • The bridge has received widespread attention since its innovative design and construction, including considerable praise from other bridge engineers, architects and architectural historians. Writing in 2000, Heinrich Figi said:

    David P. Billington has been particularly enthusiastic about the bridge:

    The German bridge engineer Fritz Leonhardt has suggested that:

    Maillart was not entirely satisfied with the bridge, writing after its completion that its soffit should have been a pointed rather than a pure curved arch, if it were properly to match his structural analysis:

    References

    Salginatobel Bridge Wikipedia


    Similar Topics