Name Princess Beatrice Out of service 1928 | Completed 1903 | |
 | ||
Owner Canadian Pacific Railway Coast Service Route coastal British Columbia, Puget Sound Identification Canada registry #116405 | ||
Princess Beatrice was a steamship built for and owned by the marine division of the Canadian Pacific Railway. The ship served from 1903 to 1928 in the coastal waters of British Columbia. The ship also operated on Puget Sound on a route from Victoria, British Columbia to Seattle, Washington. Princess Beatrice was the first ship to operate in the year-round steamship service between Seattle and Victoria that was run by CPR from 1904 to 1959. This ship should not be confused with an earlier Princess Beatrice, built in Scotland in 1874, which served on the Atlantic coast of Canada.
Contents
Design and construction
Princess Beatrice was built in 1903 at Esquimalt, British Columbia by the B.C. Marine Railway Co., Ltd. The Beatrice was the first Princess ship built for the Canadian Pacific Railway.
The dimensions of the ship were 197 feet (60 m) in length, 37-foot (11 m) beam, and 15-foot (4.6 m) depth of hold, 1290 gross tons. The power plant was a triple expansion steam engine, manufactured by Bow, McLachlan & Co. of Paisley, Scotland, producing 1,392 horsepower. The engine had three cylinders, with diameters ranging from high pressure to low pressure of 18, 30 and 50 inches (1,300 mm), with a bore stroke on all three cylinders of 36 inches (910 mm). The ship had design speed of 13 knots (24 km/h) and was driven by a single propeller. The ship was built of wood. Beatrice was one of the largest vessels to have been constructed in British Columbia up to that time. The cost of construction was $200,000.
The ship was launched on September 10, 1903. Trial runs were completed in November, 1903. The Canadian registration number was 116405. The ship was licensed for 350 day passengers. There were 40 staterooms which could accommodate 86 overnight passengers. The ship's accommodations were considered to be luxurious, and they included, consistent with the practices of the times, a separate cabin for women and children.
Operations
Capt. James W. Troup, the superintendent of the CPR coast steamship division, intended that Beatrice be operated on the run between Victoria and New Westminster until the spring of 1904, when the ship was to be transferred to a route to the Nass River and southeastern Alaska. However, with the sinking of the American steamship Clallam en route from Seattle to Victoria on January 7, 1904, the citizens of Victoria asked that the CPR put a replacement steamer on the Victoria-Seattle run. In response Troup assigned the Beatrice to the route, with the ship making its first trip to Seattle on January 20, 1904. This marked the beginning of a year-round daily passenger service that was maintained between Seattle and Victoria by the CPR Coast Service until 1959. This became part of the “Triangle Route” of steamships running between Seattle, Victoria, and Vancouver, British Columbia.
Beatrice docked at Pier 2 in Seattle. While in this service, Beatrice was drawn into a rate war on the Victoria route that broke out between the CPR Coast Service and its American rival, the Puget Sound Navigation Company
When the Princess Royal was brought into service in 1907, the plan became to relieve the Beatrice on the Seattle-Victoria round in the winter, and use the Beatrice on the Prince Rupert run. Beatrice served on the North Coast of British Columbia, making stops at the mining, logging and cannery ports along the northern coast.
Economic dislocation in November 1914, caused by World War I forced CPR to idle half of its fleet, including Princess Beatrice.
Capt. Thomas Rippon (1882–1939), later appointed superintendent of the CPR Coast Service, was in command of Beatrice from 1916 to 1920.
Grounding
In October 1911 Princess Beatrice ran aground on Noble Island.
Disposition
In 1928 the CPR brought a new vessel, the Princess Norah into service, and was able to retire the Beatrice. Beatrice was sold to B.L. Johnson, Walton & Co., a Vancouver concern, who removed the ship's machinery and converted the hulk to a floating cannery. The ex-Beatrice, now a cannery, was then towed to the west coast of Vancouver Island.