Manufacturer SEAT Designer Dante Giacosa Body style 4-door sedan | Production 1953 – 1963 Class Large family car (D) | |
 | ||
Assembly Barcelona Zona Franca, Spain | ||
The SEAT 1400 was a rear-wheel-drive four-door sedan mid-size car launched by the Spanish car maker SEAT between 1953 and 1963, the first model ever produced by SEAT and the first car to be assembled at the firm's new plant located in Barcelona's Zona Franca zone. The car was a rebranded Fiat 1400, itself Fiat’s first integrated chassis model.
Contents
Production started on November 13, 1953, carried out by an early workforce of 925 employees with a potential of 5 units produced per day, and the first SEAT 1400 car rolled off the assembly line with the licence plate 'B-87.223'. Initially in 1953 components were shipped as CKD kits from Italy and assembled by SEAT at their plant in Zona Franca, but in a quite short term from 1954 the Spanish-made parts rose to a 93% proportion of the total in order to limit imports and to help the development of the almost non-existent Spanish supplier industry, thus fulfilling SEAT's assigned key role in the development of the Spanish economy as the national car maker of the post World War II Spain. In the next few years the model's production output would gradually increase, and by 1956 10,000 cars would be produced annually, with an average of 42 cars per day.
In 1963, when the car was replaced by the SEAT 1500, 82,894 examples covering four distinctively different versions of the 1400 had been produced.
The first SEAT 1400, offered between 1953 and 1955, incorporated a 1395 cc four-cylinder water-cooled Fiat engine with a claimed output of 44 bhp and top speed of 116 km/h (72 mph).
SEAT 1400 A
The SEAT 1400 A, the first revision, launched for 1955 was a modernised version of the original 1400, based on the Fiat 1400 A which had appeared from Turin the previous year. Published power output was now raised to 50 bhp and the top speed to 125 km/h (78 mph).
SEAT 1400 B
Announced at the end of 1956, the SEAT 1400 B appearing for 1957 retained its predecessor’s bodywork but featured a revised front grill and offered a two tone paint scheme. In addition to the sedan, a five-door station wagon and commercial delivery truck version were available. Claimed engine output and maximum speed for the sedan were now 58 bhp and 135 km/h (84 mph). This version of the 1400 would continue in production until 1964.
SEAT 1400 C
The SEAT 1400 C was introduced in 1960. The modern Pininfarina styled body, came from the recently introduced Fiat 1800. The previous SEAT 1400 B remained in production: the two cars were offered in parallel, sharing the same engine, though the newer car was longer and, it appears, slightly heavier than the old. The decision to fit the old four-cylinder unit in the new bodied SEAT rather than to tool up for assembly in Catalonia of the new six-cylinder engines being fitted by Fiat in the new-bodied cars appears to have been taken on cost grounds: disposable incomes in Spain at this time were far lower than those in Italy. In 1963 a five-door estate version of the 1400 C appeared, featuring a two piece tailgate. The introduction of a diesel-engined version would have to await the successor model, however.